Desk
Assembly Instructions - Please keep for future reference
147976413
Dimensions
Width - 100 cm
Depth - 46 cm
Height - 80 cm
Important - Please read these instructions fully before starting assembly
For all enquiries please contact : 08456 400800
Ref. no RY 02.00 Date: 14/02/14
Safety and care advice
Important -
Please read these intructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 3 and 4.
Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight
on the panels, this could cause
damage.
• Assemble the unit as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
•
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this
could damage the unit. Only use
hand screwdrivers.
• Warning: Before drilling,
check the wall for hidden pipes
and cables.
• Dispose of all packaging
carefully and responsibly.
• Warning: The unit weighs
approximately
21,5kgs
Please lift with care.
Recycling – the packaging materials for this product may
be recycled through your local recycling centre. When you
want to dispose of the product itself, please consider
donating it to a local charitable organisation, otherwise
recycle it through your local recycling centre.
Cleaning instructions
• This product has been
manufactured using modern
manufacturing methods and
materials. With appropriate
in-home care and maintenance it will provide trouble
free performances.
Many
domestic multi-purpose
cleaning agents are unsuitable
for use on this product.
The use of aggressive chemicals can result in irreversible
damage. Please follow these
guidelines carefully.
USE only 5% soap, 95%
water solution, wiping with a
damp (not wet) cloth. Finally
dry with a soft clean cloth.
Dust with a soft clean cloth
only.
DO NOT USE wax furniture
polish, abrasive or aggressive
cleaners, bleach or hypochlorate (chlorine) based cleaners,
multi-purpose cleaners,
dilutes, acetone, alcohol,
solvent or similar products.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
2
Components - Panels
Please check you have all the panels listed below
1) Left end panel x1
2) Right end panel x1
3) Back panel x1
4) Top panel x1
5) Upper frame x1
6) Front frame x1
7) Front rail x1
13
x2
8) Drawer divider x1
9) Plinth x2
10) Left drawer side x2
11) Right drawer side x2
12) Drawer bottom x2
13) Back drawer side x2
14) Front drawer x2
11
12
x2
10
x2
4
3
8
14
x2
x2
2
7
1
9
5
6
9
3
Wooden dowel x 30
x 8
Ruler -Usethis ruler to help correctly identify the screws
Tools required
A
E
Metal dowel x 20
Conformat x 4
B
30mm Screw x 8
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittingsmay be supplied than are required.
05101520253035404550556065707580859095100
110 115 120 125 130 135 140 145 150 155 160 165170
105
C
F
L
P
M N
H
D
Medium locking
nut 14mm x 13
I
O
Long locking
nut 19mm x 3
Phillips screwdriver
(medium & large)
Flatbladescrewdriver
(medium)
Small
hammer
Eye protection
(when using a
hammer or glue)
mm
G
Glue x 1
x 4
Short locking
nut 10.5mm x4
Components - Fittings
Please check you have all the fittings listed below
Knob x 2
x 1
Pair of roller runners x 2
Q2
Q1
15mm Screw x 8
4MAx25 Screw x 2
4
Assembly Instructions
Step 01
Q1
N
N
1
2
H
H
A
A
A
A
H
H
B
B
B
B
B
Q1
EE
Front
Q1
E E
F
ront
Q1
H
5
Step 02
Step 03
8
A
A
A
5
A
A
Q1
Q1
I
I
A
O
A
O
A
O
3
A
A
A
H
H
H
7
A
A
H
H
6
A
A
B
Q1
E E
Front
Assembly Instructions
6
Assembly Instructions
Step 4
Step 5
4
B
B
B
1
9
9
2
9
x2
7
Assembly Instructions
Step 7
Step 6
3
8
3
F
P
8
6
O
I
6
8
Assembly Instructions
Step 8
Step 9
3
7
5
8
A
O
F
O
1
2
3
7
5
H
O
H
P
O
9
Assembly Instructions
Step 10
Step 11
4
H
C
C
10
13
11
x2
10
Assembly Instructions
Step 12
Step 13
D
D
D
D
Q2
Q2
11
12
14
14
A
A
G
G
L
M
10
11
12
B
x2
A
O
11
Assembly Instructions
Recycling – the packaging materials
for this product may be recycled
through your local recycling centre.
When you want to dispose of the
product itself, please consider
donating it to a local charitable
organisation, otherwise recycle it
through your local recycling centre.
CLEANING INSTRUCTIONS
This product has been manufactured using
modern manufacturing methods and
materials. With appropriate in-home care
and maintenance it will provide trouble free
performances. Many domestic multipurpose cleaning agents are unsuitable for
use on this product. The use of aggressive
chemicals can result in irreversible
damage. Please follow these guidelines
carefully.
USE only 5% soap, 95% water solution,
wiping with a damp (not wet) cloth. Finally
dry with a soft clean cloth. Dust with a soft
clean cloth only.
DO NOT USE wax furniture polish, abrasive or aggressive cleaners, bleach or
hypochlorate (chlorine) based cleaners,
multi-purpose cleaners, dilutes, acetone,
alcohol, solvent or similar products.
Take care of your unit by using a damp cloth to clean it.
Please remember to occasionally check that all Cams
and Screws are tight.
That's the Desk completed.
12
Stool
Assembly Instructions - Please keep for future reference
147976433
256002
Dimensions
Width - 37,7cm
Depth - 37,1cm
Height - 48cm
Important - Please read these instructions fully before starting assembly
For all enquiries please contact : 08456 400800
Ref. no RY 06.00 Date: 14/02/14
Safety and care advice
Important -
Please read these intructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 3 and 4.
Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight
on the panels, this could cause
damage.
• Assemble the unit as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
•
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this
could damage the unit. Only use
hand screwdrivers.
• Warning: Before drilling,
check the wall for hidden pipes
and cables.
• Dispose of all packaging
carefully and responsibly.
• Warning: The unit weighs
approximately
8kgs
Please lift with care.
Recycling – the packaging materials for this product may
be recycled through your local recycling centre. When you
want to dispose of the product itself, please consider
donating it to a local charitable organisation, otherwise
recycle it through your local recycling centre.
Cleaning instructions
• This product has been
manufactured using modern
manufacturing methods and
materials. With appropriate
in-home care and maintenance it will provide trouble
free performances.
Many
domestic multi-purpose
cleaning agents are unsuitable
for use on this product.
The use of aggressive chemicals can result in irreversible
damage. Please follow these
guidelines carefully.
USE only 5% soap, 95%
water solution, wiping with a
damp (not wet) cloth. Finally
dry with a soft clean cloth.
Dust with a soft clean cloth
only.
DO NOT USE wax furniture
polish, abrasive or aggressive
cleaners, bleach or hypochlorate (chlorine) based cleaners,
multi-purpose cleaners,
dilutes, acetone, alcohol,
solvent or similar products.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
2
Components - Panels
Please check you have all the panels listed below
1) Stool side x2
2) Plinth x2
3) Plinth x2
4) Rail x1
5) Seat Stool x1
5
1
3
2
4
2
3
1
3
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittingsmay be supplied than are required.
A
Wooden dowel x 12
E
Long locking
nut x 6
B
Metal dowel x 6
C
Support foot x 4
D
40mm Screw x 10
Tools required
Phillips screwdriver
(medium & large)
Flatbladescrewdriver
(medium)
Ruler -Usethis ruler to help correctly identify the screws
mm
05101520253035404550556065707580859095100
4
Small
hammer
Eye protection
(when using a
hammer or glue)
105
110 115 120 125 130 135 140 145 150 155 160 165170
Assembly Instructions
Step 1
Top
Top
Bottom
Bottom
1
3
4
3
1
A
A
A
A
A
A
E
B
B
B
B
C
C
C
C
E
E
E
E
E
E
5
B
B
D
D
Prepare panels
2
2
5
Assembly Instructions
Step 2
Attaching panels
E
3
1
3
1
4
Step 3
Fix of seat stool
5
D
D
D
D
6
Assembly Instructions
Recycling – the packaging materials
for this product may be recycled
through your local recycling centre.
When you want to dispose of the
product itself, please consider
donating it to a local charitable
organisation, otherwise recycle it
through your local recycling centre.
CLEANING INSTRUCTIONS
This product has been manufactured using
modern manufacturing methods and
materials. With appropriate in-home care
and maintenance it will provide trouble free
performances. Many domestic multipurpose cleaning agents are unsuitable for
use on this product. The use of aggressive
chemicals can result in irreversible
damage. Please follow these guidelines
carefully.
USE only 5% soap, 95% water solution,
wiping with a damp (not wet) cloth. Finally
dry with a soft clean cloth. Dust with a soft
clean cloth only.
DO NOT USE wax furniture polish, abrasive or aggressive cleaners, bleach or
hypochlorate (chlorine) based cleaners,
multi-purpose cleaners, dilutes, acetone,
alcohol, solvent or similar products.
That's the Stool completed.
Take care of your unit by using a damp cloth to clean it.
Please remember to occasionally check that all Cams
and Screws are tight.
7
Loading...