Argos Bunk Bed - Mia ASSEMBLY INSTRUCTIONS

Bunk Bed - Mia

Assembly Instructions - Please keep for future reference

8459866

Dimensions

Length - 195,3cm
Depth - 101,5cm
Height - 149,3cm
Weight - 57kg

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk

Issue 1 - 04/06/18

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

• Check you have all the
components and tools listed on
pages 2 and 3.

• Remove all fi ttings from the
plastic bags and separate them
into their groups.

• Keep children and animals
away from the work area, small
parts could choke if swallowed.

• Make sure you have enough
space to layout the parts before
starting.

Care and maintenance

• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.

• Do not stand or put weight on
the product, this could cause
damage.

• Assemble the item as close
to its fi nal position (in the same
room) as possible.

• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.

• Parts of the assembly will be
easier with 2 people.

• From time to time check that
there are no loose screws on
this unit.

• We do not
recommend the
use of power
drill/drivers for
inserting screws,

as this could
damage the unit. Only use hand
screwdrivers.

• Dispose of all packaging
carefully and responsibly.

• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.

IMPORTANT - READ CAREFULLY -RETAIN FOR FUTURE REFERENCE

ASSEMBLY:

Always follow the instruction. Current legislation requires that the high bed / bunk bed must be fi tted with 4
safety-rails and a ladder or platform for the upper bunk. The high bed / bunk bed meets the European EN
747:2012 A1:2015 standards for security and durability.

MATTRESS:

This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not
exceed 16,1 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.

WARNING:

High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags. Children can be become
trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards)
and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining
structure shall not exceed 75 mm or shall be more than 230 mm.
Do not use the high bed / bunk bed if any structural part is broken or missing.

MAINTENANCE INSTRUCTIONS:

Check regulary that all assembly fastenings are properly tightened. Ventilation of the room is necessary in
order to keep the humidity low and to prevent mould in and around the bed.

1

If you have damaged or missing components,

Components - Parts

call the Customer Helpline:

Please check you have all the parts listed below

0045 7668 8055

Leg Right x2

1

(83,1x4,3x4,3cm)
No. 12-04308311-40

Ladder side x2

4

(115,3x8,9x2,0cm)
No. 12-02011532-40

Leg Left x2

2

(83,1x4,3x4,3cm)
No. 12-04308312-40

Slat x30

5

(89,7x6,5x1,5cm)

No. 12-01508971

End panel x4

3

(87,7x42,1x1,6cm)
No. 4301-1608771-40

Tread x3

6

(31,8x6,5x2,6cm)

No. 12-02603182-20

Bedside x4

7 8

(186.7x8.9x2.0cm)
No. 1305-18673-20 No. 4301-1918671-40

Safety rail x1

9 10 11

(150.9x27.2x1.9cm)
No. 4301-1915091-40 No. 12-04306071-40 No. 12-04306072-40

Leg Right x2

(60,7x4,3x4,3cm)

Safety rail x1

(186.7x27.2x1.9cm)

Leg Left x2

(60,7x4,3x4,3cm)

2

Components - Fittings

Please check you have all the fi ttings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.

No. 3913-06080

A

M6x80mm Connecting bolt x27

No. 3930-10045

D

B

M6 Ø10x13mm Barrel nut x28

E

No. 3922-060131

No. 3930-08040

Ø10x45mm Dowel x16 Ø8x40mm Dowel x24

No. 3909-63030

G

6,3x30mm Assembly screw x4

No. 3901-40030 No. 3923-06015 No. 3938-00010-2

H

4,5x60mm Chipboard screw x6

No. 3901-45060

C

Ø3,5x15mm Chipboard screw x8

F

Ø8mm Cover cap x24

I

M6x55mm Connecting bolt x2

No. 3901-35015

No. 3938-000081-2

No. 3913-06055

J K L

4,0x30mm Chipboard screw x64 M6x15mm Sleeve nut x1 Ø10mm Cover cap x8

No. 3908-70050 No. 4008-106

M N

7,0x50mm Confi rmat screw x12 80x15x2mm Mending plate x2

No. 4008-022 No. 3934-10100

O

Ø12 Cover cap x6

No. 3939-00012-20

P Q

70x40,5x20mm Angle x2 Ø10x100mm Connecting bolt x4

Tools required

Phillips
screwdriver
(medium)

Flatblade
screwdriver
(medium)

Allen key
4mm incl.

No. 4033-002

Small
hammer

Ruler/tape
measure

Eye protection
(when using a
hammer or glue)

3