Argos Aruba - Nest Of Tables ASSEMBLY INSTRUCTIONS

Aruba- Nest Of Tables
AssemblyInstructions - Please keep for future reference
614/3837 614/3851 111/6144
Dimensions
Width-66cm
Depth-42cm
Height-54cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Argos Customer Helpline: 08456 400 800
or Homebase Customer Helpline: 0845 077 8888
SafetyandCareAdvice
Important – Please read these instructions fully before starting assembly
Check you have all the components and tools listed on pages 2 and 3.
Remove all fittings from the plastic bags and separate them into their groups.
Keep children and animals away from the work area, small parts could choke if swallowed.
Make sure you have enough space to layout the parts before starting.
Do not stand or put weight on the product, this could cause damage.
Assemble the item as close to its final position (in the same room) as possible.
Assemble on a soft level surface to avoid damaging the unit or your floor.
This product has been produced from natural timber; you may notice some variation in the grain and colour of different component parts which is normal for furniture produced using natural wood and is not the result of any manufacturing fault.
The product has been treated with a wax and oil finish to prevent dirt ingress and preserve moisture.
On unpacking the furniture you may notice an odour due to this treatment; this will disappear once the furniture is unpacked and assembled after a period of time.
This process may leave some staining on the packaging material; please take care to ensure this does not transfer to clothing or carpeted surfaces during assembly.
We do not recommend the use of power drill/drivers
inserting screws,
as this could damage the unit. Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
for
Careandmaintenance
Use an appropriate furniture polish for natural wood furniture and a dry cloth to clean the product.
Avoid placing the furniture in direct sunlight as this will cause the timber to prematurely age.
From time to time check that there are no loose screws on this unit.
This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.
1
Components - Panels
Please check you have all the panels listed below
Medium top panel
2
Large top panel (66 x 42cm)
1
Large legs x 4 (52 x 4cm)
4
(52 x 37cm)
Medium legs x 4
5
(45 x 4cm)
Small top panel
3
(38 x 32cm)
Small legs x 4
6
(38 x 4cm)
Large front rail (56 x 4.5cm)
7
Large back rail (56 x 6.5cm)
10
Large side rail x 2
13
(32 x 6.5cm)
Medium front rail
8
(42 x 4.5cm)
Medium back rail
11
(42 x 6.5cm)
Medium side rail x 2
14
(27 x 6.5cm)
Small front rail
9
(28 x 4.5cm)
Small back rail
12
(28 x 6.5cm)
Small side rail x 2
15
(22 x 6.5cm)
2
If you have damaged or missing components,
Components - Fittings
call the
orHomebaseCustomerHelpline:08450778888
ArgosCustomerHelpline:08456400800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
A
Wooden dowel x 12
D
G
Metal bracket x 12
Toolsrequired
B
16mm Screw x 24 35mm Screw x 12
E
60mm Bolt x 12 Allen key x 1
Phillips screwdriver (medium & large)
C
F
Round metal stud x 24
m
2
Ruler/tape measure
Small hammer
Ruler - Use this ruler to help correctly identify the screws
5
0
10 15 20 25 30 35 40
55
45
50
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Eye protection (when using a hammer or glue)
3
Assembly Instructions
Step 1
Assembling large table.
Two people are required for an easier assembly.
7
Insert rails , and
13
to the legs .
10
4
Note:
Holes on rails must be facing up as shown in the diagram.
Step 2
Assembling medium table.
Two people are required for an easier assembly.
Note:
13
10
4
7
13
4
4
4
Note:
14
11
5
8
Insert rails , and
14
to the legs .
8
5
Note:
Holes on rails must be facing up as shown in the diagram.
Step 3
Assembling small table.
Two people are required for an easier assembly.
9
Insert rails , and
15
to the legs .
Note:
Holes on rails must be facing up as shown in the diagram.
12
6
14
5
5
5
Note:
15
12
6
9
15
6
6
6
4
Assembly Instructions
Step 4
Fixing Metal brackets.
G
Insert metal brackets into the rails.
G
5mm
Fix metal brackets to the rails using screws ,
G
B
as shown.
Important:
Make sure
brackets are placed 5mm below rails edge before fixing, as shown in the diagram.
Repeat step 4 for the
medium small
and
tables.
B
B
Step 5
Fixing legs.
Attach metal brackets through pre drilled holes on legs using bolts and allen key , as shown.
Repeat step 5 for the
medium small
tables.
4
E
and
D
D
4
E
4
4
4
5
Assembly Instructions
Step 6
Insert dowels into the rails as indicated.
Repeat step 6 for the other two tables.
A
A
A
A
A
Step 7
Fixing top panels.
Caution:
Carefully lay the top panels on a soft and clean surface to avoid damaging the product.
Attach assembled frame to the top panel using screws .
After fixing top panel, carefully stand product upright.
Repeat step 7 for the top
panelsandin
medium small
tables.
C
and
1
32
1
C
6
Assembly Instructions
Step 8
Fix round metal studs into the pre drilled holes in legs, as shown.
Repeat step 8 for the other two tables.
F
F
NO! NO!
F
YES!
F
Step 9
Insert medium table underneath large table and small table underneath medium one.
Note:
in only through one side. You may need to rotate tables to insert the smaller one.
Assembly is complete.
If you need help or have damaged or missing parts, call the Argos Customer Helpline: 08456 400 800
or Homebase Customer Helpline: 0845 077 8888
Tables go
7
Loading...