Argyll - Chair + Footstool
Care and User Instructions - Please keep for future reference
259/7944 249/4126
233/7070 227/4133
2433
Chair
Height - 98cm Height - 38cm
Length - 79cm Length - 52cm
Footstool
Depth - 43cm
Important - Please read these instructions fully before using the product
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400800
Issue 2 - 09.07.2014
• Assemble on a soft level surface to
• Parts of the assembly will be easier with
• Remove the protective cellophane
wrapping the sofa. Do not use sharp tools
• Feet and accesories can be f ound by
Before your furniture leaves the fact ory, it i s given a final inspection pri or t o secure wrapping for
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Make sure you have enough space to
• Once feet are securly attached return t he sofa to
an upright position. To do this the sofa must be lifted
• Assemble the s of a as close to its final
• Dispose of all packaging carefully and responsibly.
work and layout the sofa.
and turned. Avoid using the feet as a l ever as doing
this may lead to damage.
position (in the same room) as possible.
avoid damaging the sofa or your floor.
2 people.
that may damage the sofa covering.
opening the zip underneath the sofa. To
access this zip spread the c el l ophane
sheet on the floor, lower the sofa so that
the rear back panel rests agai ns t the
floor. Remove package containing the
feet and accesories, t hen i ns tall the feet.
distribution. Due to tight and s ecure wrapping to minimis e movement during transit, when unwrapped, the
chair may appear a little "distres sed". This is entirely normal, and t he i l l ustrations below show how to
rectify this in 3 easy steps:
1
With clean movements bring
the back cushions of t he chair
back to their original s hape.
Spread the leather evenly across
the seat cushions with the palms
of your hands
Give the arm pads a good plump
and then straighten them as
shown.
Issue 2 - 09.07.2014
Fixtures and Fittings supplied (actual size)
Components, Fixtures and Fittings - Chair
Tools required
Components supplied (not actual size)
1
2
3
H-825 x L-790 x D-820
H-155
H-155
1
2
2
2
2M5 x 70
Issue 2 - 09.07.2014