– Please read these instructions fully before starting assembly
Issue - /06/14
Page 2
IMPORTANT SAFETY INSTRUCTIONS
Read all instruction before using and keep for future reference
Read these instructions
carefully and familiarise
yourself with the procedure
before assembling the unit.
when assembly. Please keep
children under direct supervision
of adult when using.
four persons under light or no
wind conditions.
Check that you have all the
component parts following the
list on the page 3 and
familiarise yourself with each
part before proceeding.
Take all the fittings out of the
plastic bag and separate them
into their groups.
Ensure you have enough
space to lay out all the parts
before assembly.
To avoid scratching it is
recommended that you
assemble the unit on a soft
level surface.
CAUTION
under windy condition.
Always use the pegs to secure
the gazebo when using.
structure and should be
disassembled and stored away
after using.
until completely dry.
erect in windy conditions.
from screws, nails, staples,
hooks, etc to avoid damage to
the fabric and frame.
Warning:
weight approximately
61 kgs.
Please lift with care.
The unit
Recommend Caution
To prolong the life of
the fabric/canopy, we
recommend to dismantle
it and store it indoors over
the winter months.
Each shelve can bear 45kg
maximumly. Please do not
put more than this weight
on the shelve.
Safety
suffocation to animals or
children dispose of the
plastic bags immediately.
This gazebo should be
secured to the ground at
all times. If positioned on
grass then tent pegs can
be used. If positioned on
concrete, then bolts should
be used.
Do not strike the glass with
hand or pointed items.
Do not sit or stand on the
glass surface,as this would be
hazardous.
This product contains toughened
safety glass.In the unlikely event
that the glass fails it will break
into a large number of small
fragments that may be spread
over a wide area.
Cleaning
with a damp cloth and mild
detergent, do not use bleach
or abrasive products.
1
Page 3
Components - Parts
If you have damaged or missing components, call the
Please check you have all the parts listed below
Customer Helpline: Argos = 0345 6400800
1
Gazebo Leg Pole x 2 Gazebo Leg Pole x 1Gazebo Leg Pole x 1 Support Pole x 4
5
Top Pole x 4 Top Pole x 4Metal Connector x 8 Center Connector x 1
9
23
67
1011
4
8
12
Table Leg x 1 Table Leg x 1 Table Top Frame x 1Table Leg x 1
13
Shelve x 4 Table Sling tube x 6 Table Sling tube x 4Panel x 2
17
Panel x 2 Panel x 2 Table Glass Top x 2 Upper Gazebo Cover x 1
1415
1819
16
20
2
Page 4
Components - Parts
If you have damaged or missing components, call the
Please check you have all the parts listed below
Customer Helpline: Argos = 0345 6400800
21
Main Gazebo Cover x 1 Wine Glass Rack x 1
22
Components - Fittings
If you have damaged or missing components, call the
Please check you have all the fittings listed below
Note:
may be supplied than are required.
The quantities below are the correct amount to complete the assembly. In some cases more fittings
A
B
C
Customer Helpline: Argos = 0345 6400800
D
M6X15
Screw x 40Screw x 4
E
Screw caps x 38
Screw x 36 Screw x 8
FGH
Spanner x 1
M6X28
Spanner x 1
M6X40M6X60
Peg x 8(Φ 4.5x200mm)
3
Page 5
Assembly Instructions
Step 1
Assembling Gazebo Leg
and Support Poles
connect the support
a:
4
pole
with screws
Note:
to leg pole
A
suggest to complete
this product assembly
by 2 persons
Important note:
Because of the
size of this unit we
recommend that it
is built in the place
intended for using.
Ensure to locate
the unite on the
flat ground free
from obstruction,
in a sheltered area
away from wind
and heavy rain as
this will damage
the unit.
4
1
a:
x2
A
4
3
2
1
A
1
b:
x2
repeat this step for
b:
leg pole and leg pole
.
3
c:
to connect two assembled
units by screws .
2
use support pole
A
4
4
c:
4
x4
A
3
1
1
2
4
Page 6
Assembly Instructions
Step 2
Assembling Metal
Connector onto the
gazebo frame
a: After fixing leg poles
assemble metal connector
onto leg poles
7
with srews .
3
A
21
At this step please
keep metal connector
45 degrees with the line
of support poles
b: Fix metal connectors
onto the support poles
with screws
A
7
4
4
b:
A
x4
7
2
A
x4
4
a:
1
7
7
3
1
Step 3
Assembling top poles
insert top poles
into center connector
6
5
&
8
8
5
6
5
5
6
5
Page 7
Assembly Instructions
Step 4
Assembling gazebo
covers
Carefully place the upper
gazebo cover and the
main cover
assembled top poles.
Then fix the upper gazebo
gazebo cover tightly over
the assembled roof frame.
But at this step please do
not fix the main gazebo
cover tightly.
Note:
It would be useful
to ask someone to
help you at this
step.
20
21
over the
20
21
Step 5
Assembling top poles
onto the leg
Assemble
top poles
the frame by connecting
them and metal connector
with screws
7
and screw
Then fix the main gazebo
gazebo cover tightly over
the assembled roof frame.
Note:
a ladder is suggested
to be used in this step
the connected
5
caps
and
6
onto
and
B
E
.
5
E
B
7
6
Page 8
Assembly Instructions
Step 6
Assembling bar table
Fix table legs
Fix table legs
10
onto table top frame
11
with screws
912
B
and
11
Important:
Do not fully
tighten all screws
until assembly is
complete.
Step 7
Assembling panels
Insert sling tube into
panels .
Insert sling tube into
panels .
17
16
14
15
14
12910
B
17
15
16
7
Page 9
Assembly Instructions
Step 8
Assembling table sling
tubes into the table frame
connect the panels
a:
a:
to table legs
with screws
with screws .
9and 10
9 and 10
A
A
1516
9
a:
15
x8
A
16
16
10
connect the panels
b:
910
to table legs and
1512
with screws .
910
14
x4
E
1517
A
B
b:
B
10
9
1717
12
x2
B
E
8
Page 10
Assembly Instructions
Step 9
Assembling shelves onto
the table legs
connect the shelves
a:
a:
15
13
onto the table legs
9and 10
910
and screw caps
A
C
connect the shelves
connect the
b:
:
15
13
onto the table legs
12 with screws
and screw caps
with screws
AE
AD
AE
E
E
x4
a:
C
12
13
10
9
b:
D
D
x2
Step 10
Connect the table and
the gazebo leg poles
Fix the table legs
10 910 onto the gazebo poles
9and 10with screws 23
AB
9
and
E
3
2
B
x4
9
Page 11
Assembly Instructions
Step 11
Fixing the sling tubes
to the table legs(the
side w/o panels)
14
Fix the sling tube
to the table legs and
with screws and
1012
screw caps .
AE
Fix the sling tube
to the table legs and
with screws and
1010
screw caps .
AE
15
9 9
A14B
15
9 12
A14B
Step 12
put the table glass
a:
on the table top frame
1011
1019
B
9
14
12
14
B
14
10
14
E
E
b:
hang the panels
1018
on the table frame
c:
d:
hang the wine glass
1022
rack on the support
pole
104
if the product is
positioned on grass,
please fix it using pegs
AH
Assembly is complete.
a:
19
c:
19
4
22
d:
b:
18
Important note: always use this product with caution
and read the important safety instructions.
18
H
If you need help or have damaged or missing parts, call the
Customer Helpline: Argos = 0345 6400800
For further assistance please visit http://www.argos-support.co.uk