Highsleeper - Brooklyn
Assembly Instructions - Please keep for future reference
8545639
Dimensions
Length - 200,4cm
Depth - 106cm
Height - 184,7cm
Weight - 47kg
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Issue 1 - 22/06/18
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
IMPORTANT - READ CAREFULLY -RETAIN FOR FUTURE REFERENCE
ASSEMBLY:
Always follow the instruction. Current legislation requires that the high bed / bunk bed must be fi tted with 4
safety-rails and a ladder or platform for the upper bunk. The high bed / bunk bed meets the European EN
747:2012 A1:2015 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not
exceed 19,5 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags. Children can be become
trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards)
and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining
structure shall not exceed 75 mm or shall be more than 230 mm.
Do not use the high bed / bunk bed if any structural part is broken or missing.
MAINTENANCE INSTRUCTIONS:
Check regulary that all assembly fastenings are properly tightened. Ventilation of the room is necessary in
order to keep the humidity low and to prevent mould in and around the bed.
1
If you have damaged or missing components,
Components - Parts
call the Customer Helpline:
Please check you have all the parts listed below
0045 7668 8055
Tread x4 (31,8x6,5x2,6cm)
1
No. 12-02603182-65
Filling x2
4
No. 4301-0808653-65
(86,5x29,8x0,8cm)
2
Endrail x2 (86,5x8,9x2,0cm)
No. 12-02008653-65
Slat x18 (89,7x5,5x1,1cm)
5
No. 12-01108971
Short post x1
3
(35,3x4,3x4,3cm)
No. 12-04303531-65
Top rail x2
6
(100,2x8,2x2,4cm)
No. 12-02410021-65
Endrail x2
7 8
(86,5x5,5x5,5cm)
No. 12-05508651-65 No. 12-020086510-65
Ladder side x2
9
(179,3x8,9x2,0cm)
No. 12-02017931-65
Endrail x2
(86,5x8,9x2,0cm)
2
If you have damaged or missing components,
Components - Parts
call the Customer Helpline:
Please check you have all the parts listed below
0045 7668 8055
Bedside x2
10
(186.7x8.9x2.0cm)
No. 1305-186710-65
Leg x2
13 14
(182,3x5,5x5,5cm)
No. 12-05518231-65 No. 12-05518232-65
Safety rail x3
11 12
(186.7x8.9x2.0cm)
No. 12-02018672-65 No. 12-02014661-65
Leg x2
(182,3x5,5x5,5cm)
Safety rail x2
(146,6x8.9x2.0cm)
3
Components - Fittings
Please check you have all the fi ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
No. 3913-06100
A
M6x100mm Connecting bolt x12
No. 3930-10050
D
B
M6 ø10x14mm Barrel nut x12
E
10x50mm Dowel x36 8x50mm Dowel x4
No. 3901-40070
G
4,0x70mm Chipboard screw x8
No. 3901-40030 No. 3903-40025 No. 3907-63022
J
H
6,3x105mm Assembly screw x16
K L
No. 3922-06014
C
4,0x30mm Chipboard screw x36
No. 3930-08050
F
Ø8mm Cover cap x16
No. 3909-631051 No. 3901-30020
I
3,0x20mm Chipboard screw x2
No. 3902-40030
No. 3938-000081-19
4,0x30mm Chipboard screw x10 4,0x25mm Chipboard screw x4 6,3x22mm Euro screw x4
No. 3908-70050 No. 3908-70080
M
N
7,0x50mm Confi rmat screw x16 7,0x80mm Confi rmat screw x1
No. 4008-022
P
Q R
No. 4007-024 No. 4008-020
O
Ø10 Cover cap x16
No. 3938-00010-19
70x40,5x20mm Angle x2
No. 3938-00007-19
S
Ø7 Cover cap x16
Tools required
Phillips
screwdriver
(medium)
Flatblade
screwdriver
(medium)
Allen key
4mm incl.
No. 4033-004
Bracket x2 27,5x17x15mm Angle x4
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
4
Assembly Instructions
Step 1
Insert the dowels D into
E
10
into
7
.
the holes in bedsides
11
safety rails
and endrails
and 12
8
and 7.
Insert Ø8 dowels
the holes in endrail
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Step 2
,
D
D
E
D
D
D
Ø10
Ø8
10
11
12
D
E
7
8
D
E
D
D
D
7
Attach endrails
6
rails
using screws G.
to top
Don’t overtighten.
Step 3
Attach leg 13 to endrail
7
using the inserted
dowel only.
8
Attach endrail
4
fi lling
to leg 13 using
the inserted dowel only.
and
G
D
G
G
G
7
6
G
15 Holes up!
7
4
8
13
5
Assembly Instructions
Step 4
Attach leg 14 to endrails
7
and 8. At the same
2
13
and
time attach endrail
between the legs
14
Insert assembly screws
H
and fasten with
the allen key. Don’t
overtighten.
H
H
H
7
4
8
H
14
H
H
13
2
H
15 Holes up!
Step 5
10
Attach bedside
safety rails
11
by placing the dowels
into the holes in legs
14
and
.
Push 2 barrel nuts
into the small holes in
10
bedside
11
rails
and safety
, note that the
barrel nuts should be
facing outwards on
the safety rails. Push
1 connecting bolt
through legs
to meet the barrel nuts
and fasten with the allen
key.
and
to the bed
13
B
A
13
and 14
A
14
A
A
A
A
B
B
B
11
B
A
A
A
B
B
B
13
11
B
10
B
B
11
A
6
Assembly Instructions
Step 6
Attach the second
10
bedside
placing the dowels into
the holes in legs
14
as in the previous
step.
Push 2 barrel nuts B
into the small holes
in bedside
1 connecting bolt
through legs
to meet the barrel nuts
and fasten with the allen
key.
to the bed by
13
and
10
. Push
A
13
and 14
B
A
B
10 13
B
A
14
A
Step 7
12
Attach safety rails
the bed by placing the
dowels into the holes in
14
leg
.
Push 2 barrel nuts
into the small holes in
12
safety rails
. Push
1 connecting bolt
through legs
14
the barrel nuts
fasten with the allen key.
Attach short post
the bed by placing the
dowels in safety rails
into the holes in short
3
post
N
post
. Insert screw
into the hole in short
3
and fasten with
the allen key. Don’t
overtighten. Attach the
3
short post
bedside
screws
to the
10
using the
J
.
to
B
A
to meet
B
and
3
to
12
B
N
A
A
14
B
B
12
12
J
3
N
3
J
J
10
A
Ladder can be positioned
B
left or right!!
7
Assembly Instructions
Step 8
Attach the treads 1 to
9
the ladder sides
the screws
M
Attach brackets
ladder sides
J
screws
.
Attach angles
ladder sides
L
screws
.
using
.
Q
to the
9
using the
R
to the
9
using the
L
R
J
Q
9
M
L
R
Q
J
Q
9
M
M
J
1
M
R
R
L
1
M
L
Step 9
Place the assembled
ladder into the bed.
Q
Fasten brackets
the bedside
screws
10
I
.
Attach the ladder to the
leg and short post using
K
screws
angles
through the
R
.
to
using the
M
M
M
1
1
L
R
M
K
K
I
I
13
I
K
9
9
K
K
8
Assembly Instructions
Step 10
Place two slats 5 in the
ends of the bed, against
the legs. Fasten with four
C
5
in
to the
10
.
798 mm 904 mm
C C
C
chipboard screws
Place one slat
the bed. Follow the
measurements.
Push the bedsides
together whilst attaching
middle slat
5
bed with two chipboard
C
screws
.
10
5
10
C
Step 11
Position the remaining
5
fi fteen slats
bed with an approximate
distance of 52 mm
between each.
Fasten each slat with two
screws
C
in the
C
52 mm
5 5 5 5 55 5 5 55 5 5 55 5 5 5 5
C
C
9
Assembly Instructions
Step 12
Attach wall mount
P
brackets
14
and
screws
Assembly is complete.
to legs 13
with chipboard
J
.
13
P
J
14
J
P
If you need help or have damaged or missing parts,
E-mail: order@fl exa.dk
Ref.no. 44-01622-65 A Stand: 220618 Page 11 (80-23501-65)
call the Customer Helpline: 0045 7668 8055
10
Loading...