Osaka 2 Door 2 Drawer Wardrobe
Assembly Instructions - Please keep for future reference
White 2499949
Black 2584483
Dimensions
:
Width
Depth
Height
70.9 cm
:
52.0 cm
:
181.2 cm
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Argos Customer Helpline: 0845 640 30 30
350263
Issue 1 - 15-05-2014
Safety and Care Advice
!
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• We do not recommend the use
of power drill/drivers for
inserting screws, as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page
with these instructions for
future reference.
1
If you have damaged or missing components, call
Components - Panels
the Argos Customer Helpline: 0845 640 30 30
Please check you have all the panels listed below
1
Top
(70,9 cm x 52 cm)
5
Bottom
(59,1 cm x 48,4 cm)
6
Front rail
(59,1 cm x 6 cm)
7
Back rail
(59,1 cm x 7 cm)
2
Side, left
(172,7 cm x 47 cm)
10
Drawer front
(58,5 cm x 15,7 cm)
x
3
Side, right
(172,7 cm x 47 cm)
4
12
Drawer back
2
(55,8 cm x 9,8 cm)
x
Post
(179,7 cm x 4,4 cm)
x
2
8
Back
x
(172,9 cm x 30,5 cm)
2
4
9
x
Door
(134,1 cm x 29,1 cm)
2
14
H-profile
(134,0 cm x 1,7 cm)
11
Drawer side, right/left
(45 cm x 9,8 cm)
350263-03
x
4
13
Drawer bottom
(56,8 cm x 44,7 cm)
x
2
15
Hanging rail
(58,2 cm x 2,2 cm)
2
Components - Fittings
Please check you have all the panels listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
Aa Ab
ø7.8 x 40mm Wooden dowel x
Bo
ø3 x 12mm Screw x
1.2 x 15mm Nail xDi50
Fl
Support for hanger rail - 15mm x
Hd
M4 x 20mm Screw x
Kb
ø5.8 x 8mm Screw x
14
6
12
14
ø6 x 30mm Wooden dowel x
Ca
ø15 x 10.5mm Cam x
Fh
2
Wall strap and instruction x 1
Hk
M4 x 9mm Screw x
Ko
ø4,2 x 9,5mm Screw x
Bp
8
18
4
8
ø3 x 35mm Screw x
Cb
ø5 x 8, cc34mm Bolt x
Fi
Back fitting w. ø3.5 x 15mm Screw x
Ge
ø27 x 24mm Metal Knob x
Jb
ø4 x 25mm Screw x
Mf
ø26mm Cup hinge x
8
18
4
6
20
4
Mc
0mm Crossplate x
Sa
310 x 17 x 10mm Drawer runner x
4
Tools required
Phillips screwdriver
(Medium & large)
Flatblade screwdriver
(Medium)
Magnet, adjustable x Pc4
Vl
44 x 23 x 23mm Angle x
4
Hammer
Pd
35 x 12 x 1mm Magnet catch x
2
4
Ruler - Use this ruler to help correctly identify the screws
3
17060 16040 90 15013070 120100 14011050 803020100
350263-04
Assembly Instructions
Step 1
Assembly of the
wardrobe.
1
14
8
8
3
2
5
4
7
4
6
4
4
Step 1.1
Fix the posts 4 onto the
2
sides
screws
indicated.
The top of the posts
the sides
3
ush.
and 3 using
Jb
into the holes
2
must be
Jb
Jb
and
4
Jb
and
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
ø4 x 25mm Screw x
Jb
Jb
Jb
Jb
20
Jb
4
4
32
Jb
4
Jb
2
4
4
Jb
350263-05
Jb
3
4
4
Assembly Instructions
Step 1.2
Knock the dowels Aa into
the holes indicated on
2
the sides
3
and
using a
small
hammer.
Screw the bolts Cb into
the holes indicated on
the sides
3
and
Cb
2
.
Cb
Aa
ø7.8 x 40mm Wooden dowel x
Cb
Cb
Cb
Cb
Cb
Cb
Cb
6
ø5 x 8, cc34mm Bolt x
8
2
Aa
Aa
Aa
3
Aa
Aa
Aa
Step 1.3
Fix the Crossplates Mc
to the sides
2
using the pre-mounted
screws.
Note the details.
Position the Crossplates
Mc
exactly as shown.
Fix the supports for
Fl
hangerrails
onto the
sides 2 and 3 using
Bo
screws
.
and
3
Bo
ø3 x 12mm Screw x
Mc
0mm Crossplate x
Mc
Fl
2
Support for hanger rail - 15mm x
Fl
2
Bo
4
Mc
2
Bo
Fl
3
Mc
5
Mc
350263-06
Assembly Instructions
Step 1.4
Slide the top of the
Sa
drawer runners
backwards. You can
identify the front end of
the drawer runner
the two M4 holes. See
details.
Fix the front end of the
drawer runners
2
sides
screws
and 3 using
Kb
through the
holes number 1 and 7 as
indicated.
See details.
Sa
Sa
to the
by
Kb
ø5.8 x 8mm Screw x
Front end
Kb
Sa
Hole no.
Kb
2
Sa
Kb
Kb
Sa
7
8
Sa
Front end
Sa
310 x 17 x 10mm Drawer runner x
Kb
Hole no.
Hole no.
1
Kb
Sa
7
Front end
Sa
Sa
Kb
4
Step 1.5
Slide the top of the
Sa
2
and 3
drawer runners
forwards.
Fix the drawer runners
to the sides
using screws Kb through
the holes indicated.
See details.
Sa
3
Hole no.
Note the hole!
Bottom end of
right hand side
1
Kb
ø5.8 x 8mm Screw x
4
Kb
Kb
Kb
2
Kb
Kb
Kb
350263-07
3
6
Assembly Instructions
Step 1.6
Fix the angles Vl using
Ko
screws
into the holes
indicated on the front
6
rail
.
Step 1.7
Knock the dowels Aa into
the holes indicated on
5
the bottom
back rail
hammer.
Press the magnets
into the holes indicated
on the bottom
and the
7
using a small
5.
Pc
Ko
ø4,2 x 9,5mm Screw x
Ko
Vl
Aa
ø7.8 x 40mm Wooden dowel x
Aa
Aa
Vl
4
44 x 23 x 23mm Angle x
Ko
Ko
2
Vl
6
6
8
7
5
Magnet, adjustable x Pc2
Aa
Pc
Aa
Aa
Aa
Step 1.8
Screw the bolts Cb into
the holes indicated on the
1
top
Press the magnets
into the holes indicated
on the top
.
Pc
1.
Aa
Cb
ø5 x 8, cc34mm Bolt x
Cb
Cb
Cb
Aa
Pc
6
1
Magnet, adjustable x Pc2
Cb
Cb
Cb
Pc
Pc
7
350263-08
Assembly Instructions
Step 1.9
Place the sides 2 and
3
onto the bottom 5
7
and the back rail
Push cams
Ca
holes indicated on the
5
bottom
rail
and the back
7
. Arrows pointing
towards the sides
Turn the cams
right to x the sides
3
and
.
.
into the
2/3
Ca
to the
2
Ca
ø15 x 10.5mm Cam x
8
3
.
Ca
2
Ca
Ca
5
Ca
Ca
Ca
Ca
7
Ca
Step 1.10
Place the top 1 onto the
2
sides
Push cams
holes indicated on the
sides
Arrows pointing towards
the top
Turn the cams
right to x the top
and 3.
2
and 3.
1
.
Ca
into the
Ca
to the
.
1
Ca
Ca
ø15 x 10.5mm Cam x
6
1
Ca
Ca
3
2
350263-09
8
Assembly Instructions
Step 1.11
Place the front rail
as shown.
Fix the angles
sides using screws
See detail.
Vl
to the
Step 1.12
6
Ko
Ko
ø4,2 x 9,5mm Screw x
.
6
4
Ko
Ko
Place the backs 8 into
the rabbet on the top
into the H-prole 14 and
7
8
to
using
4
onto the posts
Important!
Make sure the
!
angle between the
1
top
90° when the backs
attached.
Fix the backs
back rail
nails
Use a small hammer.
and the posts 4 is
1
, the posts 4 and the
Di
.
1
.
8
is
the top
1
Distribute equally !
1.2 x 15mm Nail xDi36
14
Di
1
8
1
8
4
4
Di
Di
Di
7
9
350263-10
Assembly Instructions
Step 1.13
Important!
The wardrobe is
!
heavy. Lift with
care.
Its recommended that the
wardrobe is xed to the wall.
Fh
Use the ttings
the instructions included
with the ttings.
. Follow
Fh
Wall strap and instruction x 1
Step 2
Assembly of the drawers.
Step 2.1
Fix the drawer sides 11
12
to the drawer back
as shown, using
Bp
screws
.
12
12
11
ø3 x 35mm Screw x
13
Bp
Bp
8
10
11
x
2
350263-11
Bp
11
11
x
2
10
Assembly Instructions
Step 2.2
Knock the dowels Ab
into the holes indicated
on the drawer sides
11
using a smal hammer.
Step 2.3
Slide the drawer bottom
13
into the drawer
11
sides
.
Ab
ø6 x 30mm Wooden dowel x
8
11
Ab
11
Ab
x
2
11
11
13
x
2
Step 2.4
Screw the bolts Cb into
the holes indicated on
10
the drawer front
.
Step 2.5
Push the drawer front
onto the drawer sides
Place cams
Ca
holes indicated. Arrow
pointing towards the front.
Turn the cams
right to x the front.
10
11
into the
Ca
to the
.
Ca
Cb
10
10
Cb
ø5 x 8, cc34mm Bolt x
Cb
x
2
Ca
ø15 x 10.5mm Cam x
Ca
11
4
4
11
11
x
2
350263-12
Assembly Instructions
Step 2.6
Important!
Make sure the
!
angle between
10
the drawer front
the drawer sides
before the drawer bottom
13
is xed using Fi as
shown.
To adjust the angle between
the drawer sides and the
fronts push the tting
sidewards. See details.
and
11
is 90°
Fi
Fi
10
13
11
Ge
ø27 x 24mm Metal Knob x
Fi
12
Fi
Back fitting w. ø3.5 x 15mm Screw x
11
x
2
Fi
Fi
Hd
4
M4 x 20mm Screw x
90°
4
4
Fi
Step 2.7
Fix the metal knobs Ge to
10
the drawer front
Hd
screws
.
using
Step 2.8
Pull out the drawer
runners. Slide the
drawers onto the runners.
Fit and x the lower
drawer rst and work your
way up.
Ge
Hd
Ge
10
Hd
x
2
Hk
M4 x 9mm Screw x
Hk
4
Hk
Fix drawers to the drawer
runners using screws
350263-13
Hk
.
12
Assembly Instructions
Step 3
Assembly of the doors.
15
Step 3.1
Place the cup hinges Mf
into the holes indicated
on the doors
Fix the hinges using
screws
Fix the magnet catches
Pd
using screws
the holes indicated.
9.
Bo.
Bo into
Bo
ø3 x 12mm Screw x
Bo
Bo
12
9
Mf
ø26mm Cup hinge x
Pd
35 x 12 x 1mm Magnet catch x
9
4
4
Mf
Mf
Bo
Bo
Bo
9
Pd
x
2
13
350263-14
Assembly Instructions
Step 3.2
Place the hanger rail 15
Fl
into the supports
Slide the cup hinges
onto the crossplates Mc.
Fix the hinges using the
premounted screw in the
crossplates.
See details below on how
to t the cup hinge
onto the cross plate Mc.
.
Mf
Mf
Ge
ø27 x 24mm Metal Knob x
15
9
Hd
2
M4 x 20mm Screw x
2
15
Fl
9
Mf
!
Mc
Mf
!
Mc
Fix the metal knobs
9
to the doors
screws
Hd
using
.
Ge
Ge
Ge
Hd
Hd
Adjust the magnets
350263-15
Pc
.
Pc
Pc
14
Assembly Instructions
Step 3.3
Adjusting the doors
left/right.
a:
To adjust the door
towards the left hand
side - turn the adjusting
screw to the right.
b:
To adjust the door
towards the right hand
side - turn the adjusting
screw to the left.
Adjusting the doors
forwards/backwards.
a:
b:
a:
Loosen the xing screw.
b:
Push the cup hinges /
the door forwards OR
backwards to adjust.
c:
Tighten the xing screws
of ALL the crossplates.
Adjusting the doors
up/down.
a:
Loosen the two pre-mounted
screws of each crossplate,
BUT ONLY as much as it
will allow the cross plate to
move up and down.
b:
Push the the door up OR
down to adjust.
a:
a:
b:
b:
c:
c:
c:
Tighten the pre-mounted
screws of ALL the
crossplates.
If you need help or have damaged or missing parts, call the
Home Retail Group - 489-499 Avebury Boulevard - Saxon Gate West - Central Milton Keynes MK9 2NW
15
Argos Customer Helpline: 0845 640 30 30
350263-16
Loading...