Argos 8364353 ASSEMBLY INSTRUCTIONS

Alden Coffee Table
8364353
7
Safety and Care Advice
Check you have all the components and tools listed on pages 2 and 3.
Keep children and animals away from the work area, small parts could choke if swallowed.
Make sure you have enough space to layout the parts before starting.
Glass safety
This product complies with
BS EN 12521:2010 Imported by:
Arogs Ltd 489-499 Avebury Boulevard Central Milton Keynes MK9 2NW
Assemble the item as close to its final position (in the same room) as possible.
Assemble on a soft level surface to avoid damaging the unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until
the whole bed is assembled.
Do not overtighten the nuts to avoid causing damage to the
threads.
CAT NO.: 836/4353
P/O No:
If the glass is chipped or broken) stop using the product and
consult the Manufacture or Supplier.
12813320180326
as this could damage the unit.
Only use hand screwdrivers and Allen keys.
Dispose of all packaging carefully and responsibly.
We do not recommend the use of power drill/drivers
inserting screws,
for
Warnings:
a) Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats are used to prevent such items from coming into contact with glass..
b) Do not sit or stand upon the glass surface(s) c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary) do not use washing powders or any other substance containing abrasives since these substances scratch glass.
Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
From time to time check that
there are no loose screws on this unit.
This product should not be discarded with household waste. Take to your local authority waste disposal centre.
1
Components - Parts
lf you have damaged or missing components. call the Customer Helpline: 0345 077 8888
Short leg(lower)
3
1
Glass t op
//
700 x 8 mm thk
(
(
370 x 50 x 50 mm
leg(upper)
Short
4
(
)
370 x 50 x 50 mm
Cover plate
5
(
70 x 45 mm
)
)
)
Leg Frame
2
(
600 x 550 x 50 mm
6
Base ring
(
)
610 x 610 x 10 mm
)
2
Loading...
+ 4 hidden pages