Classic antique bunkbed frame - 190x90 cm
Assembly Instructions - Please keep for future reference
6566878
Dimensions
Length - 195cm
Depth - 96/102cm
Height - 146cm
Weight - 43kg
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Issue 3 - 03/09/15
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2, 3 and 4.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
IMPORTANT - READ CAREFULLY -RETAIN FOR FUTURE REFERENCE
ASSEMBLY:
Always follow the instruction. Current legislation requires that the high bed / bunk bed must be fi tted with 4
safety-rails and a ladder or platform for the upper bunk. The high bed / bunk bed meets the European EN
747:2012 A1:2015 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not
exceed 16,1 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags. Children can be become
trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards)
and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining
structure shall not exceed 75 mm or shall be more than 230 mm.
Do not use the high bed / bunk bed if any structural part is broken or missing.
MAINTENANCE INSTRUCTIONS:
Check regulary that all assembly fastenings are properly tightened. Ventilation of the room is necessary in
order to keep the humidity low and to prevent mould in and around the bed.
1
If you have damaged or missing components,
Components - Parts
call the Customer Helpline: 0045 7668 8055
Please check you have all the parts listed below
Slat x30
1
No. 12-01508971
(89.7x6.5x1.5cm)
List f.safety x2 (31.8x2.8x1.2cm)
2
No. 12-01203181-7
Tread (w.4 holes) x1
3
(35.0x6.5x2.0cm)
No. 12-02003503-7
Panel x4 (27.6x8.7x0.8cm)
4
No. 12-00802764-7
Endrail x4
7
No. 12-02008771-7
(87.7x9.2x2.0cm)
Panel x32 (27.6x9.4x0.8cm)
5
No. 12-00802761-7
Tread (w.3 holes) x1
8
(35.0x6.5x2.0cm)
No. 12-02003504-7
Panel x 4
6
No. 12-00802765-7
Endrail x 4
9
No. 12-02008772-7
(27.6x8.1x0.8cm)
(87.7x6.5x2.0cm)
Bedside x4
10
No. 1305-18673-7
(186.7x8.9x2.0cm)
2
Components - Parts
Please check you have all the parts listed below
Leg long x4 (82.6x4.3x4.3cm)
Leg short x4 (61.8x4.3x4.3cm)
11
No. 12-04306181-7
Safety rail 3/4 x2 (149.7x6.5x2.0cm)
12
No. 12-02014971-7
13
No. 12-04308262-7
Safety rail 1/1 x2 (186.7x6.5x2.0cm)
14
No. 12-02018673-7
Ladderside bunkbed x1 (114.8x8.9x2.0cm)
15
No. 12-02011481-7
3
Components - Fittings
Please check you have all the fi ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
No. 3913-06090
A
M6x90mm Connecting bolt x8
No. 3930-10045
D
10x45mm Dowel x22
No. 3939-00012-7
G
ø12x10mm Cover cap wood x3
No. 3938-00007-1
K
ø7mm Cover cap x22
No. 3938-000081-1
L
ø8mm Cover cap x8
No. 3922-06014
B
M6 Ø10x14mm Barrel nut x8
No. 3901-40030
E
4,0x30mm Chipboard screw x72
No. 3938-00010-1
H
ø10mm Cover cap x10
No. 3901-45060
M
4,5x60mm Chipboard screw x3
No. 4008-022
O
70x40,5x20mm Angle x2
No. 3901-45040
C
4,5x40mm Chipboard screw x4
No. 3909-63050
F
6,3x50mm Assembly screw x8
No. 3909-63090
J
6,3x90mm Assembly screw x41
No. 3934-10088
N
ø10x88mm Connecting double bolt x4
Tools required
Phillips
screwdriver
(medium)
Flatblade
screwdriver
(medium)
Allen key
4mm incl.
No. 4033-004
4
Small
hammer
Ruler/tape
measure
Assembly Instructions
Step 1
10
D
12
14
Insert dowels to
bedsides – and to all
the safety rails and .
It may be necessary to
tap the dowel in very
gently with a small
hammer.
Repeat same procedure
10
12
and
and
for all bedsids
all safety rails
14
Step 2
Insert the connecting
double bolts to all the
short legs
Twist /turn the bolt to
follow the hole ø6,8 mm
N
11
14
D
12
x2
x2
N
N
Ø6,8 MM
D
D
10
x4
Counter sunk 5 mm
hole should face same
direction as bedside
drilling
bedside
drilling
11
Ø5 MM
N
Ø6,8 MM
5
Assembly Instructions
Step 3
Attach leg to endrails
7
. and with 4 screws
J
. using the allen key
Attach leg to endrails
7
. and with 4 screws
J
. using the allen key
13
9
11
9
Repeat same procedure
for both headboard and
footboard
Step 4
4
Slide 1 panel
between endrail
9
followed by 8 panels
5
and fi nish with 1
6
panel
Attach legs
endrails
screws
7
J
using the allen
key.
7
and
11/13
to
and 9 with
7
J
9
J
13
J
11
4
5
5
7
9
7
5
5
5
5
6
5
5
Repeat same procedure
for both headboard and
footboard
13
9
4
13
6
5
11
7
5
5
5
5
5
5
5
Important note:
A variation of the width of the panels of ±2-3%
9
has to be expected as wood is a live material,
i.e. variation of 2-3 cm per 1 meter.
Leaving some space at the panels, tongue & groove,
should be distributed regularly along the bed end.
If there is too little space for the panels, these should be
acclimatized for 2-5 days in order to adapt to the humidity
of the room.
The reason for this problem might be that the wood has absorbed a little
moisture during transportation/stocking.
J
J
11
6
Assembly Instructions
Step 5
Attach bedside and
both safety rails to the
10
14
bed fi rstly by placing the
dowels in holes in the legs.
Push barrel nuts into
B
the 2 small holes
in bedside push
1 connecting bolt
through each leg to
meet barrel nuts and
10
A
13
B
then fasten with the allen
key.
Push 4 assembly screws
J
. through legs to meet
the safety rails . and then
13
14
fasten with the allen key.
Step 6
Attach bedside to
the bed fi rstly by
placing the dowels in
the holes in the legs.
10
D
A
14
B
10
D
x2
J
B
J
A
13
10
B
J
J
A
13
Push 2 barrel nuts into
the small holes in bedside
10
. push 1 connecting bolt
A
. through each leg to
F
meet barrel nuts then
B
13
B
fasten with the allen key.
Step 7
Attach bedside to the
bed fi rstly by placing the
dowels in the holes in the
leg.
Push 2 barrel nuts
into the small holes
in bedsides . push
one connecting bolt
through each leg to
meet barrel nuts and
then fasten with the allen
key.
10
B
10
A
11
B
B
x2
12
B
J
J
A
13
10
B
A
11
A
11
B
11
10
10
A
B
J
A
A
13
A
11
7
Assembly Instructions
Step 8
Attach the 2 beds by
putting the one bed (with
13
legs ) in top of the
other bed.
Attach the connecting
double bolt in legs
N
with the upper bed by
screws through legs
C
11
13
13
C
Step 9
Push 2 assembly screws
J
through the leg 13
to meet the safety rails
12
and then fasten
with the allen key.
Ladder can be
positioned
left or right !
Step 10
Attach the tread and
8
. to the ladderside
with the screws
3
15
F
x2
12
13
C
J
N
11
13
C
N
11
12
11
12
F
13
C
N
11
C
J
Attach the treads and
8
. to the leg and
with screws
3
11
J
Attach the ladderside
with the safety rails
with screws
F
12
Attach the ladderside
with the bedsides with
screws . Insert cover
caps in the holes.
M
G
10
8
13
15
15
8
3 holes
M
G
15
10
13
8
J
15
F
4 holes
F
J
M
3
3
F
M
G
G
10
J
11
Assembly Instructions
Step 11
Place 1 slat (No.8)
1
in the bed, follow the
measurement.
Push the bedsides .
10
together when attaching
the slat to the bed
with 2 screws Position
the remaining 14 slats
1
E
1
in the bed with a distance
of 64 mm between each.
Fasten each slat with 2 x
screws
E
E
12 mm
1
E
912,5 mm
PUSH
1
E
1
64 mm
PUSH
E
1
E
E
9
Assembly Instructions
Step 12
Attach the safety list
2
inside the bed, on the
front safety rails
12
Should be in the center
of the front guards
between the slats.
12
2
10
E
Attach it to the safety
rails and bedside
with chipboard screws
Follow the measurement.
Attach the safety list
2
on the outside of the
bed, on the back safety
14
rails
should be in
the center of the back
guards.
14
2
10
E
Attach it to the safety
rails and bedside
with chipboard screws
Max mattress height !
2
10
10
E
12
12
E
2
8
E
O
O
E
11
Follow the measurement.
Attach wall mounting
O
brackets
with screws
to legs 11
E
.
Max. mattress height !
Assembly is complete.
E
O
11
E
E
2
10
71 mm
10
71 mm
8 8
12
12
E
2
10
Assembly Instructions
Bunkbed as 2 single beds
Note: To acheive the
single bed look shown
on the picture, one
end of the upper bunk
4
(assembled parts
5,6,7,9
should be swapped
over with the lower bunk
(assembled parts
,6,7,9 and 11).
and )
,
13
4,5
If you need help or have damaged or missing parts,
E-mail: order@fl exa.dk
Ref.no. 44-01115-7 C Stand: 030915 Page 12 (80-10403-7)
call the Customer Helpline: 0045 7668 8055
11
Loading...