Page 1
TC Belvoir Bamboo & White Shelving Unit
618/2915
80cm
30cm
136cm
3
Issue 1 - 10/08/16
Page 2
Page 3
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline:03456 400800
1
Left leg x 2
4
1st shelf
4th shelf
7
Right leg x 2
2
5
2nd shelf
3
6
Rail x 8
3rd shelf
2
Page 4
Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
A
Locking Pin x 16
D
B C
Locking Nut x 16
E
45mm Screw x 20 35mm Screw x 2
G
Wall plug(for solid
Tools
required
walls only) x 2
H
Hanger bracket x 2
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Wooden dowel x 26
F
12mm Screw x 2
I
Cam cap x 16
Small
hammer
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Ruler/tape
measure
6mm Suitable drill bit
(for use with wall plug)
Hammer Drill
(Only for dril hole on the wall)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
105
110 115 120 125 130 135 140 145 150 155 160 165 170
Eye protection
(when using a
hammer or glue)
3
Page 5
Assembly Instructions
A
Step 1
Assembling leg
NOTE:It would be useful to ask
someone to help you at this stage.
a:
Using wooden dowel and 45mm
screw to attach left leg and
right leg .
D
2
C
1
a:
C
C
2
1
D
b:
Screw locking pins into left leg
1
3
and right leg .
A
2
3
b:
1
3
2
A
3
4
Page 6
Assembly Instructions
Step 2
Assembling rails
NOTE:It would be useful to ask
someone to help you at this stage.
a:
Use 12mm screws to fix hanger
bracket to the 2nd shelf
H
as shown.
b:
Insert wooden dowel into left leg
3
1
and right leg .
Attach rails onto the unit.
3
3
Insert locking nut into rails
and tighten the locking nut to
secure the unit.
F
3
5
C
3
2
B
3
a:
b:
1
F
H
3
3
3
5
2
B
3
3
3
3
3
3
3
3
C
3
3
3
3
3
3
1
c:
Repeat above steps to assemble
the other legs .
1
3
3
2
c:
2
3
B
3
2
3
C
1
B
5
Page 7
Assembly Instructions
Step 3
Assembling shelf
NOTE:It would be useful to ask
someone to help you at this stage.
a:
Insert wooden dowel into rails
3
.
Use cam caps to cover the
C
I
locking nuts as shown.
a:
C
3
I
3
3
3
I
I
b:
Attach 1st shelf onto the unit
and use 45mm screw to fix it to
4
D
the uint.
Repeat above steps to assemble
2nd shelf , 3rd shelf and 4th
shelf to the unit as shown.
5
3
7
6
b:
D
4
5
6
7
6
Page 8
Assembly Instructions
A
Step 4
Fix to the wall
NOTE:It would be useful to ask
someone to help you at this stage.
E
Use 35mm screw and wall plug
to fix the unit on the wall via
G
hanger bracket as shown.
NOTE: Please make sure the unit
is secure before use.
The assembly is now complete.
E
H
G
H
NOTE:If you have damaged or missing components,
call the Customer Helpline:03456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
7
Page 9
A Guide to - Wall Mounting & Fixings
Important note:
If plastic wall plugs
are supplied with your
product:
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
responsibility of the installer.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5:
drilled hole.
Types of walls
No.1 “General Purpose” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
loads, general purpose wall plugs can
be used.
No.2 “Plasterboard” wall plug
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
No.3 “Cavity Fixing” wall plug
For use with plasterboard partitions or
hollow wooden doors.
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
For use with walls stuck with
is secure to the retaining wall.
No.6 “Shield Anchor” wall plug
Heavy loads
For use when attaching light loads on
to plasterboard partitions.
Care &
Maintenance
heavy loads such as shelving, wall
cabinets and coat racks.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
Revision 2 - 7/10/09
Loading...