Argos 6179447 ASSEMBLY INSTRUCTIONS

Curved PC Trolley
Assembly Instructions - Please keep for future reference
617/9447
617/9674
Dimensions
Width - 80cm
Depth - 48cm
Height - 76cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Safety and care advice
Important - Please read these instructions fully before starting assembly
Check you have all the components and tools listed on pages 2 and 3.
Remove all fittings from the
plastic bags and separate them into their groups.
Keep children and animals away from the work area, small parts could choke if swallowed.
Make sure you have enough space to layout the parts before starting.
Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
Do not stand on the panels, this could cause damage.
Assemble the unit as close to its final position (in the same room) as possible.
Assemble on a soft level surface to avoid damaging the unit or your floor.
Parts of the assembly will be easier with 2 people.
●From time to time check that there are no loose screws on this unit.
We do not recommend the use of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand screwdrivers.
Dispose of all packaging carefully and responsibly.
Warning: The unit weighs approximately 22.1kgs.
Please lift with care.
This product should not be
discarded with household waste. Take to your local authority waste disposal centre.
Care and maintenance
Note: If required the next page can be cut out and used as a reference throughout the assembly. Keep this page with these instructions for future reference.
1
Components - Panels
Please check you have all the panels listed below
Top (80 x 48cm)
1
If you have damaged or missing components, call the Customer Helpline:08456 400800
Keyboard (74.6 x 30cm)
5
Left side (67.5 x 47.8cm)
2
Right side (67.5 x 47.8cm)
3
Centre support (48 x 36.8cm)
6
Back support (76.8 x 16.7cm)
7
Shelf (42.5 x 24cm)
8
Bottom (80 x 48cm)
4
Cross shelf (36 x 32.8cm)
9
2
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
A
Locking nut x 4
D
45mm Screw x 17
G
J
Front castor x 2
Tools required
Runner left x 1
Phillips screwdriver (medium & large)
Flatblade screwdriver (medium)
B C
Locking pin x 4
E
Shelf support x 4
H
Runner right x 1
K
Cover cap x 4
Small hammer
Dowel x 6
F
15mm Screw x 24
I
Castor x 2
Ruler/tape measure
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
3
Assembly Instructions
Step 1
Step 1
F
Fitting the runners
Note: It would be useful to ask someone to help you at this stage.
a: Use Screws to fix
the Runner left , onto Left side 2 .
2
F
G
Slide top of the runner to access the first hole.
Insert Dowel into Left side 2 .
2
C
G
2
a:
2
F
G
C
F
G
2
b: Use Screws to fix
the Runner right , onto Right side .
F
H
3
Slide top of the runner to access the first hole.
Insert Dowel into Right side 2 .
C
3
F
H
3
b:
H
F
C
F
H
3
3
4
Assembly Instructions
Step 2
Fitting the centre support
Note: It would be useful to ask someone to help you at this stage.
a:
C
9
a: Insert Dowels into
Cross shelf .
b: Use Screws to fix
Back support onto Centre support 5 .
c: Use Screws to fix
Cross shelf onto the unit.
C
9
D
7
6
D
9
b:
6
7
D
c:
Step 3
Fitting bottom and side panels
Note: It would be useful to ask someone to help you at this stage.
a: Use Screws to fix
Bottom ,Left side 2 , Right side onto the unit.
Continued on next page.
5
4
D
3
9
D
a:
2
2
4
3
D
Assembly Instructions
Step 3 - continued
b: Use Screws to fix
Left side 2 , Right side 3 onto the unit.
3
2
D
b:
D
2
3
c: Use Screws to fix
the Front castors and Castors onto the unit.
Note: The Front castors feature a locking arm. We recommend you lock the castors when you have finally positioned the unit in place.
I
J
F
J
Step 4
Fitting the top panel
Note: It would be useful to ask someone to help you at this stage.
a: Screw in Locking pins
b onto Top .
B
1
c:
J
J
F
F
I
I
J
a:
B
1
B
b: Use Locking nuts
to fix the Table top onto the unit .
A
1
b:
A
A
A
1
6
Assembly Instructions
Step 5
Fitting the drawer panel
Note: It would be useful to ask someone to help you at this stage.
Use Screws to fix the Keyboard onto the unit.
F
5
Step 6
Fitting the shelf
Place Shelf supports into the unit.
Slide shelf into the unit.
Note: Adjust the shelf supports to the desired height.
8
E
5
F
8
E
Step 7
Cover the screws
Use Cover caps to cover the screws.
Assembly is complete.
If you need help or have damaged or missing parts, call the
7
K
K
Customer Helpline : 08456 400800
Loading...