Page 1
Page 2
Page 3
Page 4
Page 5
Customer information
Keep these instructions for further use.
Maximum safe load for glass top is 20KGS
PRODUCT INFORMATION
. This product complies with BS7449: 1991
. Imported by:
Argos Distributors Ltd
489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
MK9 2NW
. Product Cat No.: 609/1415D
. P/O No:
The glass included with this product is tempered glass of a nominal thickness
of 6mm.It complies to BS6206 class C.
If a glass component is chipped or broken replace with glass of the type
described on this label. Consult the manufacturer, retailer or agent with regard
to obtaining a manufacturing specification and shape for replacement glass
quoting the model number and batch number or date of manufacture.
WARNINGS
1) Do not place very hot or very cold items against or in close proximity to
glass surfaces unless an adequately thick insulating material is used to
preventtsuch items from coming into contact with the glass.
2) Do not strike the glass with hard or pointed items.
3) When cleaning glass panels or mirrors use damp cloth or leather with
Washing up liquid or soft soap if necessary, do not use washing
Powders or any other substance containing abrasives since these
Substances scratch glass.
4) Do not sit or stand upon horizontal glass surfaces.
Page 6
609/1415
Assembly Instructions – Please keep for future reference
Important – Please read these instructions fully before starting assembly
Dimensions
Width - 40cm
Depth - 40cm
Height - 45cm
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 -
08/12/09
Glass Lamp Table
Page 7
Safety and Care Advice
Glass safety
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
Important – Please read these instructions fully before starting assembly
1
• Dispose of all packaging
carefully and responsibly.
•
Place the product on flat and
steady surface during use.
• Keep these instructions for
further use.
• Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
• This product complies with
BS7449: 1991.
• Imported by:
Home Retail Group.
489-499 Avebury Boulevard.
Saxon Gate West.
Central Milton Keynes.
MK9 2NW
• Product Cat No.: 609/1415(D)
• P/O No:
• The glass included with this product is tempered glass of a
nominal thickness of 6 mm. It complies to BS6206 class C. If a
glass component is chipped or broken replace with glass of the
type described on this label. Consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and
shape for replacement glass quoting the model number and batch
number or date of manufacture.
• Maximum safety load of glass is 20KGS.
Warnings
1) Do not place very hot or very cold items against or in close proximity to glass surfaces unless an
adequately thick insulating material is used to prevent such items from coming into contact with the
glass.
2) Do not strike the glass with hard or pointed items.
3) When cleaning glass panels or mirrors use damp cloth or leather with washing up liquid or soft soap
if necessary, do not use washing powders or any other substance containing abrasives since these
substances scratch glass.
4) Do not sit or stand upon horizontal glass surfaces.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Do not stand or put excessive
weight on the product, this
could cause damage.
• From time to time check that
there are no loose screws on
this unit.
Page 8
Please check you have all the parts listed below
Components - Parts
2
Glass top (Ø40cm)
Pedestal (41.8 x 5cm)
Glass base (Ø35cm)
1 2
3
Page 9
Components - Fittings
A
Nut x 1
3
Please check you have all the fittings listed below
Threaded rod x 1
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
B C
D
Self adhesive pad x 4
Spanner x 1
0
Ruler – Use this ruler to help correctly identify the screws
5
10 2015 4035
30
25 80
75
7060 65
45
50
55
160155150140 145120 125
130 135
85 90 10095 115110105 165 170
Note:
The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Page 10
Step 1
Assembly Instructions
Attaching threaded rod
4
Step 2
Locating pedestal
Slide pedestal over
the threaded rod.
Ensure the end with the
plastic cap is facing
down.
1
A
B
2
Screw nut onto
one end of threaded
rod .
Place glass top
upside down onto a
clean flat surface.
Screw threaded rod
into the metal disc
on glass top .
Fully tighten nut
down onto the metal
disc.
A
B
B
1
A
1
40CM Diameter
Upside down
Plastic cap this end
2
1
A
B
Page 11
Assembly Instructions
Step 3
Step 4
Attaching glass base
Carefully screw glass
base onto the end
of threaded rod.
Do not overtighten.
Assembly is complete.
5
3
C
C
3
2
2
a:
b:
Shown from
below glass base!
35CM Diameter
Attaching pads
a: Peel off the protective
film from self adhesive
pads .
Stick self adhesive pads
to the glass base.
b: Turn the table upright.
C
3
C
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Page 12
Glass Round Lamp Table
Assembly Instructions - Please keep for future reference
609/1415
Dimensions
Width - 40cm
Depth - 40cm
Height - 45.6cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
issue 1 4 /16/10
Page 13
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand on the panels, this
could cause damage.
Assemble the unit as close to its
final position (in the same room)
as possible.
Assemble on a soft level
surface to avoid damaging the unit
or your floor.
Parts of the assembly will be
easier with 2 people.
Keep these instructions for future reference
This product complies with
BSEN14749.
Warning
Do not place very hot or very
cold items against or in close
proximity to glass surfaces unless
an adequately thick insulating
material is used to prevent such
items from coming into contact
with the glass.
Argos Ltd. MK9 2NW.
Do not strike the glass with hard
or pointed items.
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
Dispose of all packaging carefully
and responsibly.
Warning: The unit weighs
approximately 3.9kgs.
Please lift with care.
If a glass component is chipped
or broken, stop using the product
and consult the manufacturer
supplier.
When cleaning glass panels
use a damp cloth or leather with
washing up liquid or soft soap if
necessary; do not use washing
powders or any other substances
containing abrasives since these
substances scratch glass.
Care and maintenance
●Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
Assembly to be carried out by
the competent adult only.
1
●From time to time check that
there are no loose screws on this
unit.
During assembly children
should be kept away from the
product due to the potential risk of
injury.
●This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
disposal centre.
Do not use this item if any
components are missing or
damaged.
Page 14
Components - Panels
If you have damaged or missing components,
call the Customer Helpline:08456 400800
Please check you have all the panels listed below
Top glass x 1 (40 x 40cm)
1
Tube x 1 (5 x 42cm)
3
Base glass x 1 (35 x 35cm)
2
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
Two end threaded bolt x 2
B
Glass pad x 5
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
2
Page 15
Assembly Instructions
Step 1
Step 1
a:
Fitting the tube
Note: Assemble on a soft
level surface or on the
original packing material to
avoid damaging the unit or
your floor.
a: Stick the Glass pads
B
c onto the Base glass
c .
2
b:
b: Screw in Two end
threaded bolt onto
Base glass .
A
2
B
2
A
2
c: Screw in Tube
onto the unit.
3
c:
3
2
3
Page 16
Assembly Instructions
Step 2
Fitting the top
Note: It would be useful to
ask someone to help you
at this stage.
a: Screw in Two end
threaded bolt onto
Top glass .
A
1
a:
A
1
1
b: Screw in Top glass
onto the unit.
1
b:
Assembly is complete.
If you need help or have damaged or missing parts, call the
Customer Helpline : 08456 400800
4
Page 17
Matrix Glass Round amp Table
L
Assembly Instructions - Please keep for future reference
609/1415
Dimensions
Width - 40cm
Depth - 40cm
Height - 45.6cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
issue 1 1710 /13
Page 18
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put excessive
weight on the product, this
could cause damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging
carefully and responsibly.
• Place the product on flat and
steady surface during use.
Glass safety
Keep these instructions for future reference
Glass safety
• Keep these instruction for future
reference.
• Imported by:
Argos Ltd.
489-499 Avebury Boulevard.
Saxon Gate West.
Central Milton Keynes.
MK9 2NW
If the glass is chipped or broken, stop using the product and
•
consult the Manufacturer or Supplier.
• Batch No:
•
Date of Manufacture:
•
Type of glass used: 6mm toughened glass
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Keep these instructions for
further use.
• To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.
Warnings
(a)
Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats
are used to prevent such items from coming into contact with the glass.
(b) Do not sit or stand upon the glass surface(s).
(c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
(d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if
necessary, do not use washing powders or any other substance containing abrasives since these
substances scratch glass.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Page 19
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components,
call the Customer Helpline:08456 400800
Top glass x 1 (40 x 40cm)
1
Tube x 1 (5 x 43.5cm)
3
5
Glass pad x 5
Base glass x 1 (35 x 35cm)
2
4
Metal rod x 4
( 0.6 x 43cm )
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Tape
measure
2
Page 20
Assembly Instructions
Step 1
Step 1
Attaching the glass pad
Note: Assemble on a soft
level surface or on the
original packing material to
avoid damaging the unit or
your floor.
a: Stick the Glass pads
5
onto the Base glass
c .
2
b: Screw in
onto
Base glass .
Metal rod
4
2
a:
5
2
4
2
3
Page 21
Assembly Instructions
Step 2
Fitting the top
Note: It would be useful to
ask someone to help you
at this stage.
4
5 .
4
Top
3
: Attach Metal tubes
a
through Metal Rods
Finger tighten
b:
glass
1
onto the unit
shown.
as
4 3
5
4
Assembly is complete.
If you need help or have damaged or missing parts, call the
Argos Ltd.489-499Avebury
Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
1
Customer Helpline: 08456 400800
4
Loading...