Argos 600/6479, 600/6486 User guide

Dining Table

Assembly Instructions - Please keep for future reference

600/6479

600/6486

Dimensions

Width - 90cm
Depth - 50cm
Height - 75cm

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 10/09/12

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Do not discard any of the

packaging until you have
checked that you have all the
parts and the pack of fittings.

• Discard all extra fittings and

keep fittings out of reach of
children.

• Assemble this product on a flat

surface.

Warnings

• This product should only be

used on firm, level ground.

Care and maintenance

• Please clean the table surface
using either damp (not wet)

cloth and a mild domestic soap
solution or by using an
appropriate polish.

• Assemble all parts loosely
before tightening any bolts.

• Unit weight: 7kgs.

• At least 2 people are required

to assemble this product.

• Retain Assembly Instructions
for future reference.

• Make sure the legs remain in
contact with the ground.

• Do not use any abrasive
materials when cleaning.

• From time to time check that

there are no loose bolts on this
unit.

• We do not

recommend the

use of power

drill/drivers for
inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Dispose of all packaging

carefully and responsibly.

• Do not stand on the product.

1

If you have damaged or missing components,

Components - Parts

call the Customer Helpline: 08456 400800

Please check you have all the parts listed below

1

Table top

(90 x 50 x 1.5cm)

2

Leg frame x 2

(Ø2.5 x 50 x 74cm)

3

Side rail x 2

(Ø1.3/0.5 x 75 x 11.5cm)

Components - Fittings

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.

A

M6 x 40mm Bolt x 8 M6 x 32mm Bolt x 4 Allen key x 1

Ruler - Use this ruler to help correctly identify the screws

B C

105 150 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

2

Assembly Instructions

Step 1

Attaching leg frames

Place the top panel
on a flat protected
surface.

Position the leg frames

2

on the top panel

as shown. Align the holes
and fix using bolts .

Tighten bolts using allen

C

key .

Important:

Two persons are
required to hold

on the frames to
assist the
assembly.

1

1

B

2

2

B

B

B

1

B

B

2

Step 2

Attaching side rails

Position the side rails
into the leg frames as

shown. Align the holes
and fix together using

A

bolts . Tighten bolts
using allen key .

C

Important:

Carefully turn
over the table. At

least two people
are required to lift

the table.

3

2

1

A

3

A

A

A

3

A

2

A

A

A

A

2

2

3

Assembly is complete.

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

3