Argos 6006053 ASSEMBLY INSTRUCTIONS

Product Documentation

Assembly Instructions QF 5207-01

Article No.:

012168-xx-01-2436

Date:

Prepared by:

Checked by:

9-Apr-10

CSH

Article no.:

Description:

Size:

Family Code:

012168-xx-01-2436

Bentwood dining chair

W460XD560XH870mm

Revised

Edition

Date

DD/MM/YY

Change Details

Prepared

By

Assembly instruction
Edition No.: 1 (Date: 9/4/2010)

REVISION HISTORY

Page 1 of 3

Product Documentation

Assembly Instructions QF 5207-01

Article No.:

012168-xx-01-2436

Assembly instruction

Page 2 of 3

Product Documentation

Assembly Instructions QF 5207-01

Article No.:

012168-xx-01-2436

Page 3 of 3

Dining Chair

Assembly Instructions -　Please keep for future reference

600/6039

600/6053

600/6022

600/6046

600/6077

Dimensions

Width - 46cm

Depth - 54cm

Height - 87cm

Important –　Please read these instructions fully before starting assembly

Ｉｍｐｏｒｔａｎｔ　–　Ｐｌｅａｓｅ　ｒｅａｄ　ｔｈｅｓｅ　ｉｎｓｔｒｕｃｔｉｏｎｓ　ｆｕｌｌｙ　ｂｅｆｏｒｅ　ｓｔａｒｔｉｎｇ　ａｓｓｅｍｂｌｙ

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800

Issue 1 - 16/03/12

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

• Check you have all the

components and tools listed on
pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them
into their groups.

• Keep children and animals
away from the work area, small
parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before
starting.

Care and maintenance

• Only clean using a damp cloth
and mild detergent,do no use

bleach or abrasive cleaners.

• Do not stand or put weight on
the product

this could cause damage.

• Assemble the item as close
to its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the
unit or your floor.

• Parts of the assembly will be

easier with 2 people.

• From time to time check that

there are no loose screws on
this unit.

during assembly,

• We do not

recommend the
use of power
drill/drivers for

inserting screws,

as this could damage the unit.
Only use hand screwdrivers.

• Dispose of all packaging

carefully and responsibly.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

1

Components - Parts

Please check you have all the parts listed below

(44 x 45 cm) Top leg (64.5 x 43.3 cm) Bottom leg (64.5 x 43.3 cm)

Seat

1 2 3

2

If you have damaged or missing components,

Components - Fittings

call the Customer Helpline: 0845 640 0800

Please check you have all the ttings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more
ttings may be supplied than are required.

A

B

C

Bolt x 4 (M6 x 32mm) Bolt x 1 (M6 x 15mm) Spring washer x 5 (M6)

D

White connector x 4 (5/8”) Plastic feet x 4

E

F

Rubber cap x 4

G

Allen key x 1

Tools required

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

0 1 2 3 4 5 6

Ruler/tape
measure

Ruler - Use this ruler to help correctly identify the screws

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

3

Assembly Instructions

Step 1

Attaching connectors
and feet to the legs.

Slide the white connectors

D on legs 2 and 3 .

Insert plastic feet
into the ends of legs

3 .

and

E fully

2

2

3

D

Step 2

Attaching leg 2 to chair
seat.

Place the seat 1 on a
covered table top.
With the arrow marks on
the legs pointing to seat
front, move the connectors
so that they are aligned
to the holes of the leg
and the screw threads on
the seat. Assemble the
legs to the chair seat with
bolt

A using allen key

G .

E

POINT TO

SEAT FRONT

2

G

A

C

Continued on next page.

1

4

Assembly Instructions

Step 3 - continued

Attaching leg 3 to chair
seat.

With the arrow marks on
the legs pointing to seat
front, move the connectors
so that they are aligned to
the holes of the leg and the
holes on the seat.
Assemble the legs to the
chair seat with bolt
using allen key

A

G .

3

G

A

C

Step 4

Final Assembly

Fasten bolt B with washer

C where legs 2 and

3 overlap.

Cover the white connector

D with Rubber cap F .

Turn the chair over
carefully.

F

F

F

F

G

B

C

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Argos Ltd MK9 2NW

5