Argos 5432941, 5659982, 5493258, 5386327 User guide

G.

H.

A .1X Left Seat Cushion

C .1X Right Seat Cushion

B .1X Middle Seat Cushion

X5

F .1X Right Back RestD .1X Left Back Rest E .2X Middle Back Rest

TC NEW PAOLO CORNER POWERED

Simple Assembly Instructions-please keep for future reference

5432941
5659982

5493258
5386327

1 x Left Arm Cushion

G.

Fittings

Velcro

Mains Electricity Supply

2x

J

H.

1 x Right Arm Cushion

Important-Please read these instructions fully before starting assembly

If you need help or have damaged or missing pants,call the

1.Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.

2.Check that you have all the component
parts following the list on the back cover
and familiarise yourself with each part
before proceeding.

3.Take all the fitting out of the plastic bag
and separate them into their groups.

4.Ensure you have enough space to lay
out all the parts before assembly.

5.To avoid scratching it is recommended
that you assemble the unit on a soft level
surface.

Customer Helpline:

0345 640 0800
0345 601 2895

NOTE: It would be useful to
ask someone to help you at
this stage.

1.Carefully combine the Left

Seat A together with Back
cushion D and E.

The arm cushion package

is tied inside the bottom of

sofa.Please get the arm

cushion for assembly.
See fig.1.

Firstly attach the arm cushion.
you can find the assembly

steps in the last page.

(G)

G.

D E

A

fig.1

NOTE: It would be useful
to ask someone to help

Attach the center unit on left unit,

Attach the center unit on right unit,

4.

Then engage the metal locks.

See fig.4.

2.Engage the Metal Locks
push them together until you
hear them lock into position.

See fig.2.

Repeat the same above

3.

2 steps for right seat.

See fig.3.
The arm cushion package
is tied inside the bottom of

sofa.Please get the arm

cushion for assembly.

(H)

C

Metal Lock

FE

fig.2

H.

fig.3

Attach the right unit on center unit

Attach the right unit on center unit

5.

Then engage the metal locks.

See fig.5.

NOTE: Carefully line up the

two side Metal Locks.
Ensure they align

correctly.

fig.4

fig.5

WARNING:If the supply
cord is damaged,it must b e
replaced by the manufac turer,

its service agent or simi larly
qualified persons in or der to
avoid a hazard.

6.Remove and unpack the fittings which

A

are stored under the Seat Unit

C

.

See fig.6.

NOTE: It would be useful
to ask someone to help
you at this stage.

Back and Foot Rest
Adjustment

This Chair features a
reclining back rest and
raised foot rest. You need to
be sitting in the chair to
activate the features.

7.Back and Foot Rest Adjustment

1

Press the "Adjustment Lever-

"

front button

, the chair will



recline and the foot rest will

automatically lift up. 

See fig.6.

2

Press the "Adjustment Lever-

back button

the normal

"

.The sofa return to

position.



See fig.6.

3

Adjust the recliner to your

own requirements.

J

8.

Finally carefully place the unit in the

desired location.

See fig

A

C

J

fig. 6

.8.

Beware of entrapment. Keep
hands and fingers clear of the
Tilt Mechanism when operating
the controls.
Ensure that children or pets are
not playing or lying in the way
when the Tilt Mechanism is
operated.
Prevent children from playing
on the furniture or with the
controls.

NOTE:It wou ld be useful to as k

CAUTION:

WASTE EL ECT RICA L PR ODUCTS
SH OUL D NOT BE DISP OS ED OF
WI TH HO USE HOL D WAS TE. PLE ASE

RECYCLE WHERE F ACI LITI ES

CH ECK WI TH YOUR

FOR RECYAL

someone to he lp yo u at this

g

Sta e.

ING ADVICE .

LOCAL AUTH OR ITY

EXI ST .

fig.

8

Care and Maintenance

Safety

To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.

Cleaning

As with all surfaces clean with a damp cloth and mild detergent, do not use
bleach or abrasive products.

Fitting

From time to time please ensure there are no loose screws on the product.

if you need help or have damaged or missing parts,call the Customer Helpline:

fig. 7

0345 640 0800/0345 601 2895
489-499 Avebury Boulevard Milton Keynes MK9 2NW,Argos Limited

Assembly Instructions

Arm cushion assembly steps

Please fix the arm cushion by

1.

zipping it onto the outside of

the armrest.

See fig. 8.

Assembly Instructions

Press the seat cushion next to the

3.

inside of armrest. then stick the

velcro into the inside of armrest.

See fig. 10.



Adjust the arm cushion with the

2.

right position onto the armrest .

See fig.9.

fig. 8

fig. 10

fig. 9