Argos 5424825 ASSEMBLY INSTRUCTIONS

Heavy Duty - Bunk Bed
- Please keep for future reference
557/5554 542/4825 814/8809
Dimensions
Width - 205,8cm Depth - 102,8cm Height -159,0cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Issue 1 - 06/09/17
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
.
Check you have all the components and tools listed on pages 2 and 3.
.
Remove all fittings from the plastic bags and separate them into their groups.
.
This product contain
natural timber; you may
notice some variation in the grain and colour of different component parts which is normal for furniture produced using natural wood and is not the result of any
.
We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.
manufacturing fault.
.
Keep children and animals away from the work area, small parts could choke if swallowed.
.
Make sure you have enough space to layout the parts before starting.
.
Assemble on a soft level
.
Do not stand or put weight on the product, this could cause damage.
.
Assemble the item as close to its final position (in the same room) as possible.
.
Parts of the assembly will be
easier with 2 people.
.
Dispose of all packaging
carefully and responsibly.
surface to avoid damaging the unit or your floor.
Care and maintenance
.
Use an appropriate furniture polish for natural wood furniture and a dry cloth to clean the product.
.
Avoid placing the furniture in
direct sunlight as this will cause the timber to prematurely age.
IMPORTANT, READ CAREFULLY -RETAIN FOR FUTURE REFERENCE. ASSEMBLY:
Current legislation requires that the bunk bed must be fitted with 4 safety-rails and a ladder or platform for the upper bunk bed. The bunk bed meets the European BS EN 747-1: 2012 + A1: 2015. standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not exceed 21 cm. The mattress top must not pass the marking on the ladder.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injury from falls. Do not use the bed if any structural part is broken or missing. Be aware that children can strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed/high bed.
.
From time to time check
that there are no loose screws on this unit.
.
This product should not be discarded with household waste. Take to your local authority waste disposal centre.
WARNING:
Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance between the top safety barrier and the wall shall not exceed 75 mm. or shall be more than 230 mm.
MAINTENANCE INSTRUCTIONS:
All assembly fastenings should always be tightened properly and that care should be taken that no loose.
CLEANING: LACQUERED: Wooden, lacquered and painted as well as laminated surfaces should be wiped over with a
cloth and a mild soap. OIL: Oiled surfaces can be cleaned with soapy water, e.g. brown soap. Wipe with a clean cloth. To maintain the natural life in the furniture which is provided by the oil treatment, we recommend an oil aftercare of the furniture 1-2 times a year. The colourless natural oil for maintenance of oil-treated furniture is available at your local furniture store.
ttings are
1
Components - Panels
Please check you have all the panels listed below
Short guard rail x2
09
(150,0 x 9,0 x 1,9 cm)
Front side rail x2
10
(190,0 x 11,0 x 4,4 cm)
Back side rail x2
11
Upper Right Headboard x1
01
(100,8 x 77,0 x 7,0 cm)
(190,0 x 11,0 x 4,4 cm)
Slats x 04
12
(91,0 x 7,0 x 1,7 cm)
Slats x 24
13
(91,0 x 7,0 x 1,7 cm)
Upper Left Headboard x1
02
(100,8 x 77,0 x 7,0 cm)
Lower Headboard x2
03
(100,8 x 77,0 x 7,0 cm)
Guard rail support x 1
04
(38,7 x 5,5 x 1,9 cm)
Step x 3
05
(30,6 x 5,5 x 2,8 cm)
Short Ladder Side Rail x1
14
(89,2 x 6,5 x 2,3 cm)
Long Ladder Side Rail
15
(120,2 x 6,5 x 2,3 cm)
Upper Top Rails x2
06
(100,2 x 8,8 x 2,5 cm)
Lower Top Rails x2
07
(100,2 x 8,8 x 2,5 cm)
Long guard rail x2
08
(190,0 x 9,0 x 1,9 cm)
2
If you have damaged or missing components,
Components - Fittings
call the Customer Helpline: 03456 400 800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
A
10 x 50mm Wooden dowel
D
4 x 30mm Screw X 03
G
1/4 x 110mm x 17 Bolt X 8
J
Metal Pin X04
M
Allen Key X1
P
B
X 32 X 08
10 x 40mm Wooden dowel
E
7 x 70 x 13mm Bolt X 12
H
7 x 60 x 17mm Bolt X 12
K
Barrel nut X08
N
Spacer 69mm X2
Q
C
4 x 35mm Screw X 56
F
7 x 100 x 17mm Bolt X 14
I
Half Moon nut X08
L
Connector Bolt X8
O
Plastic Cap X12
R
Plastic Cap Ø10 X20
Plastic Cap Ø8 X12
Tools required
Phillips screwdriver (medium & large)
Small hammer
Ruler - Use this ruler to help correctly identify the screws
5
0
10 15 20 25 30 35 40
55
45
50
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Plastic Cap Ø17 X30
m
2
Ruler/tape measure
Eye protection (when using a hammer)
3
Assembly InstructionsAssembly Instructions
Step 1Step 1
Inserting wooden dowels
Insert wooden dowelsInsert wooden dowels
wooden dowels
and
B
into the indicated parts.
A
B
11
05
x3
10
B
x2
08
A
x2
09
A
x2
A
A
x2
A
AA
A
A
A
A
Step 2Step 2
Fitting top rails
Insert wooden dowels into Lower headboard as shown.
Fix Lower top rail to Lower headboard using bolt and allen key , as shown.
Do not over tighten screws
Repet step 2 for the other lower headboard.
3
M
A
3
7
E
M
M
E
M
03
M
+
E
+
E
A
A
07
+
E
A
x2
4
Assembly InstructionsAssembly Instructions
Step 3Step 3
Fitting top rails
Insert wooden dowels into upper top rail , as shown.
6
A
M
Fix upper left headboard to upper top rail using bolt and allen key , as
E
shown.
Do not over tighten screws
6
M
2
M
E
M
02
M
+
E
+
E
A
A
06
+
E
A
Step 4Step 4
Fitting top rails
Insert wooden dowels into upper right headboard , as shown.
Fix upper right headboard to upper top rail using bolt
E
and allen key , as shown.
Do not over tighten screws
A
1
1
6
M
M
M
E
M
01
M
+
E
+
E
A
A
06
+
E
A
5
Assembly InstructionsAssembly Instructions
Step 5Step 5
I
Fixing side rails
!
Attention
From this step are, two people are required for an easier assembly.
Insert half moon nuts into side rails, as shown.
With help, fix front side rail and back side rail to
10
Lower headboard using bolt and and allen key
F
, as shown.
M
!
Make sure front side rail
10
is posioned as shown in
G
the diagram.
I
11
3
ATTENTION!
G
11
G
M
M
+
+
G
M
+
F
M
+
G
M
I
03
I
+
F
M
+
10
F
M
Step 6Step 6
Fixing lower headboard
Insert half moon nuts into side rails, as shown.
With help, fix front side rail and front side rail to lower headboard using bolt
G
and and allen key , as
3
shown.
I
10
11
F
M
I
G
G
M
M
+
+
M
G
+
M
F
+
M
G
+
M
F
+
03
I
I
11
10
F
M
6
Assembly InstructionsAssembly Instructions
Step 7
Fixing side rails
Insert half moon nuts into side rails, as shown.
With help, fix front side rail and back side rail to
10
upper right headboard using bold and and allen key
F
M
, as shown.
!
Make sure front side rail
10
is posioned as shown in
G
the diagram.
I
11
EN 747+A1:2015
Product:
Heavy Duty Bunk
Distributed by:
ARGOS LTD
Batch: 000/2016
Made in Brazil
To help prevent serious or fatal injuries from
Warning
entrapment or falls:
Strangulation Hazard: Never attach or hang items to any part of the bunk bed that are not designed for use with this bed; for example, but not limited to, belts, bags, ropes and clothing.
.
- Never allow a child of under 6 years on upper bunk.
- Use ladder for entering and leaving upper bunk.
- Prohibit more than one person on upper bunk. Do not remove this label
11
ATTENTION!
10
I
G
G
M
M
+
+
G
M
+
F
M
+
01
G
M
I
I
+
F
M
+
F
M
Step 8
Fixing upper left headboard
Insert half moon nuts into side rails, as shown.
With help, fix front side rail and back side rail to upper left headboard using bolt and and allen key , as shown.
!
F
M
Attention:
Do not fully tight screws.
I
11
2
G
10
I
G
G
M
M
+
+
M
G
+
M
F
+
M
G
+
M
F
+
02
I
I
11
01
10
FMF
M
7
Assembly InstructionsAssembly Instructions
Step 9
Fixing long guard rails
Fix long guard rail to upper right headboard
8
1
and upper left headboard
2
using screws and allen key .
M
F
Step 10
Fitting upper bed
Two people are required for this step
F
M
F
+
M
F
+
8
8
2
1
2
M
F
M
+
F
M
+
Insert barrel nut and connector bold into the
K
L
Lower bed. Then, insert metal pin into the
J
Lower bed, as shown.
Insert barrel nut into
K
upper bed. Then, with care, attach the two beds through metal pin, as shown.
Fix the two beds using connector bolt and allen
M
key , as shown.
L
L
K
L
K
L
J
L
K
K
J
L
K
L
K
J
L
K
J
L
K
A
J
KK
L
B
K
J
C
M
M
L
8
Assembly InstructionsAssembly Instructions
Step 11
Step 11
N
I
Fixing slats
Firstly, fix slats on both ends of the rails using screws , as shown.
Using Spacer , place slats working towards the middle of the bed, as shown.
Fix on the side first, using screws , then fix other side by pushing the rail against the slats if necessary.
C
13
C
12
N
!
60 - 72mm
12
13
13
N
I
b:
12
a:
12
13
C
n
N
C
I
N
60 - 72mm60 - 72mm
!!
c:
12
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
9
Assembly InstructionsAssembly Instructions
Step 12
MATTRESS HEIGHT MUST NOT
Attaching ladder
BE ABOVE THIS LINE
Fit steps 5 to short ladder side rail 14 and long ladder side rail 15.
Fix steps to the rail using bolt h and allen key m .
5
14
15
H
M
M
H
+
15
M
H
+
M
H
+
05
14
05
H
M
+
05
H
M
+
H
M
+
Step 13
Fixing ladder
Fix ladder to the side rails using bolt and allen key
M
, as shown.
H
M
M
+
+
M
M
H
H
+
+
H
M
H
+
H
M
H
10
Assembly InstructionsAssembly Instructions
Step 14
Fixing short guard rail
Attach wooden dowels to the indicated holes of the ladder, as shown.
Fix short guard rails to upper left headboard using bolt and allen key
M
,and to the ladder using
H
bolt h and allen key m.
F
B
9
2
M
M
F
+
M
F
+
M
H
+
M
H
F
+
B
09 09
2
B
Step 15
Fixing guard rail support
Fix guard rail support to long guard rails and side
8
rail using screws , as shown.
4
D
04
8
8
D
D
D
11
Assembly InstructionsAssembly Instructions
Step 16
Attaching plastic caps
Fit plastic caps into the
O
indicated holes on both upper and lower beds, as shown.
O
O
O
O
O
O
O
O
Step 17
Attaching plastic caps
Fit plastic caps into the indicated holes on both upper and lower beds, as shown.
R
R
R
R R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
12
Assembly InstructionsAssembly Instructions
Step 18
Turning bunk bed into two single beds
Detach ladder from the bunk bed and remove the upper bed from top of the lower bed.
Detach guard rails from the upper bed.
Q
Step 19
Attaching plastic caps
R
Fit plastic caps , , and
O
into the indicated holes, as shown,
P
P
02
P
R
P
R
R
R
P P
10
O
P
P
P
11
O
P
P
P
P
01
R
O
R
O
R R
13
Assembly InstructionsAssembly Instructions
Step 20
Attaching plastic caps
Fit plastic caps and
Q
into the indicated holes,as shown.
Step 21
Attaching plastic caps
P
Q
Q
Q
Q
02
Q
Q
10
P
Q
Q
11
P
Q
Q
P
P
Q
Q
01
R
Fit plastic caps , , and
P
into the indicated holes,
O
as shown.
O
O
O
O
03
R
R
R
R
11
O
P
O
P
O
03
10
P
P
R
R
O
R R
Assembly is complete.
14
Loading...