Argos 5415566, 5421907, 5396173, 5441341, 5588228 ASSEMBLY INSTRUCTIONS

Malibu - 5+2 Drawer Chest

Assembly Instructions - Please keep for future reference

CR

CR

CR

CR

CR

CR

CR

558/8228

539/6173

544/1341

541/5566

542/1907

WARNING!

In order to prevent overturning, this product must be

used with the wall attachment device provided

Dimensions

Width - 74.8cm

Depth - 39cm

Height - 108.6cm

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: [e-mail] (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020

More help is available throughout this

booklet by scanning in the QR codes

or typing in the links

MADE IN

BRITAIN

Issue 5 - 06/10/16

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs
approximately 38kgs.
Please lift with care.

• Check you have all the
components and tools listed on
pages 2 and 3.

• Remove all fittings from the
plastic bags and separate them
into their groups.

• Keep children and animals
away from the work area, small
parts could choke if swallowed.

• Parts of the assembly will be
easier with 2 people.

Care and maintenance

• Make sure you have enough
space to layout the parts before
starting.

• Do not stand or put weight on
the product, this could cause
damage.

• Assemble the item as close to
its final position (in the same
room) as possible.

• Assemble on a soft level
surface to avoid damaging the
unit or your floor (use opened
out unit carton).

• We do not
recommend the
use of power
drill/drivers for

inserting screws,
as this could damage the unit.
Only use hand screwdrivers.

• Safety note: To prevent
possible overbalancing this unit
must be secured to a wall
using the overbalance protector
kit supplied or, an alternative
fixing method of your choice.

• Dispose of all packaging
carefully and responsibly.

• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.

• From time to time check that
there are no loose screws on
this unit.

• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.

When applicable, remove any protective film

from the panels before they are used

Tools required

Rule Scissors Hammer

Cross-head
screwdriver

Eye protection
(when using a
hammer or drill)

Electric drill
(do not use for
fitting screws)

Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.

1

Components - Panels

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: [e-mail] (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020

Please check you have all the panels listed below

1

Left Side

(107.1 x 39.4cm)

(DF6786)

2 4

Right Side (DF6787)

(107.1 x 39.4cm)

When applicable, remove any
protective film before use

3

Top (DF6780)

(74.8 x 39.6cm)

Divider

(16 x 37.3cm)

(DF6781)

Plinth (DF5856)

5

(71.4 x 9.2cm)

8

Small Left Drawer
Front

(DF6782)

(35.25 x 15.7cm)

Left Drawer Side

11 12

(35 x 13cm)

14

Large Drawer Back (W665-130)

(66.5 x 13cm)

x 7

(WB350-130LH)

x 5

6 7

9 10

16

Cross Rail (DF5858)

(71.4 x 6cm)

Small Right Drawer
Front

(DF6783)

(35.25 x 15.7cm)

Right Drawer Side

(35 x 13cm)

x 7

Large Drawer Base

(67.6 x 34.7cm)

x 5

(WB350-130RH)

(T676-347)

Back Rail

(71.4 x 6cm)

(DF5857)

x 2

Large Drawer Front (DF5996)

(70.8 x 15.7cm)

13

Small Drawer Back

(30 x 13cm)

x 5

x 2

(W300-130)

Small Drawer Base

15

(31.1 x 34.7cm)

x 2

(T311-347)

17

Back

(98.9 x 74cm)

(DF6788)

2

Components - Fittings

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: [e-mail] (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.

Drawer Fittings Bag marked ‘drw kit’

A

Quickfit dowel

(F545) x 14

D

19mm

Screw (F461) x 12

Main Fittings Bag

A

Quickfit dowel

H

Wooden dowel (F22) x 16

(F545) x 12

B

Large locking cam nut (F607) x 14

E

15mm Screw

(F284) x 10

B

Large locking cam nut (F607) x 12

I

9mm Screw (F73) x 42

F

13mm Screw

J

Plastic Nail

(F91) x 5

C

Knock-in Peg

(F63) x 28

F

13mm Screw

(F171GY) x 28

G

Wedgefix

(F639) x 4

(F63) x 14

K

Nail (F51) x 24

Individual Fittings Bags

L

Drawer Brace (F420) x 5

a

N

b

N

c

N

d

N

3

CL

DL

336mm long

350mm long

CL Runner

(F422) x 7

CR Runner (F424) x 7

DL Runner (F425) x 7

DR Runner

(F426) x 7

M

Handle

(F418) x 12

O

CR

Overbalance protector

F474) x 1

kit (

DR

Assembly Instructions

Step 1

Use the Drawer Fittings Bag marked ‘drw kit’ for Steps 1 - 14

Prepare 5 pairs of
drawer sides

a: Insert a large locking

cam nut into the left
drawer sides and the
right drawer sides .

B

11

12

Standard Drawer Box Assembly

hps://www.youtube.com/watch?v=HclfJdkm-Lg

a:

B

B

B

Note: The arrow on the
locking cam nut must
point towards the
hole in the end of the
panel.

b: Push 1 of the quickfit

dowels as far as it will
go into the 5 left drawer
sides and the 5 right
drawer sides .

Note: Only the plastic
thread of the quickfit
dowel sticks out from the
panel.

A

11

12

b:

A

11

12

x 5 x 5

11

A

12

x 5 x 5

A

Step 2

Fit the drawer sides
to the 5 large drawer
fronts

Push the left drawer
sides . and right
drawer sides . down
onto the back of the 5
large drawer fronts .

Turn the large locking
cam nuts clockwise
to the “2 o’clock” position
as far as they will go to
secure the panels.

Important: Make sure
there is no gap between
the fitted panels.

11

12

10

B

B

Edge Edge

Turn to “2 o’clock”

x 5

11

Edge

12

10

4

Assembly Instructions

Step 3

Fit the large drawer
bases

Slide a large drawer base
. down the grooves in

16

the drawer sides and
. and down into the

12

groove in the large
drawer front .

11

10

Step 4

Fit the large drawer
backs

Fit a large drawer back
between the drawer
sides and .

Make sure that the large
drawer base fits into
the groove in the large
drawer back .

11 12

16

14

14

Standard Drawer Box Assembly

hps://www.youtube.com/watch?v=HclfJdkm-Lg

16

12

x 5

11

10

C

x 5

14

C

11

C

16

12

9

C

Hold the large drawer
back in position and

14

tap the knock-in pegs
through the holes in the
drawer sides and .

11 12

C

Step 5

Fit the handles

Attach 2 handles to
each large drawer front
. using screws .

10

M

D

Step 6

Fit the drawer braces

Turn the 4 drawer
assemblies over and
hook a drawer brace
onto the bottom edge of
the drawer back .

L

14

D

D

10

M

E

10

L

E

E

L

x 5

M

x 5

Important: Make sure
that the drawer assembly
is square before fitting
the drawer brace.

Fix it to the drawer front

10 14

. and drawer back
using 2 screws .

5

E

14

E

L