Argos 52363040, 52873040 ASSEMBLY INSTRUCTIONS

Nest of Tables

Assembly Instructions - Please keep for future reference

052 xx 3040

412 / 7886 427 / 2535 609 / 5992

Dimensions

Width - 29.6cm

Depth - 29.0cm

Height - 34.4cm

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.

Rev C - 05/05/15

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

Check you have all the components and tools listed on pages 2 and 3.

Remove all fittings from the plastic bags and seperate them into their groups.

Keep children and animals away from the work area, small parts could choke if swallowed.

Make sure you have enough space to layout the parts before starting.

Care and maintenance

Do not stand or put weight on the product, this could cause damage.

Assemble the item as close to its final position (in the same room) as possible.

Assemble on a soft level surface to avoid damaging the unit or your floor.

Parts of the assembly will be easier with 2 people.

We do not recommend the use of power drill/drivers for

inserting screws,

as this could damage the unit. Only use hand screwdrivers.

Do Not dispose of packaging until assembly complete.

Dispose of all packaging carefully and responsibly when assembly complete.

To protect the furniture, position the furniture out of direct sunlight and away from direct heat sources such as radiators and fires.

Do not place the furniture in excessively dry and humid conditions.

From time to time check that there are no loose screws on this unit.

Always lift furniture when moving it (do not drag) otherwise the joints may be damaged.

Do not place hot or cold objects on the surface, always use protective mats to avoid marking the furnture.

This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Clean spills up immediately

Dust surfaces with a soft, dry, lint free cloth.

More stubborn marks can be removed using a damp (not wet) cloth. Wipe the surface dry immediately using a soft lint free cloth.

Do not use detergants, abrasive cleaning products or cleaning products that contain ammonia, solvents or silicone as these may damage the surface finish.

Components - Panels

Please check you have all the panels listed below

Important - Thick lines indicate finished edges

Larger Nest

8792

Top (42.2x35cm)

Smaller Nest

8791

Top (29.0x29.6cm)

8794

8768

Right End

(32.2x34.4cm)

Right End

(28.4x29cm)

8793

8767

Left End

(32.2 x 34.4cm)

Left End

(28.4x29cm)

6013

8769

(31.6x19cm)

Rail

(25.6 x 19cm)

If you have damaged or missing components, call the

Components-Fittings

Customer Helpline: 01709 534123

for important information when contacting Customer Helpline.

Please turn to back page

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.

Large cam x 16 Code 760001103

Metal dowel x 16 Code 760003004

Knock-in Trim x2 Code 684xx3040

Tools required

Cross headed screwdriver (medium & large )

Small Hammer

Tape Measure

Eye protection (when using a hammer)

Ruler - Use this ruler to help correctly identify the screws

100

110

120

130

140

150

Drill

160

170

+ 8 hidden pages