Knightsbridge Oak Large Bookcase
Assembly Instructions - Please keep for future reference
257/4352
Dimensions
Width - 90cm
Depth - 30cm
Height - 180cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
issue 1 - 02/04/14
!
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
Do not stand or put weight on
this product during assembly,
this could cause damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
From time to time check that
there are no loose screws on
this unit.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
As wall materials vary,
screws for fixing to wall are not
included. Please purchase a
suitable screw system from
your local specialised dealer.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
1
Large Bookcase (90x30x180 cm)
2
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A
Wall strap x 1
Tools required
0
Ruler/tape
150140130120110100908070605040302010
measure
B
Ø12x1mm Washer x 1
C
Ø3.5x15 mm Screw x 1
Philips screwdriver
(medium & large)
Ruler - Use this ruler to help correctly identify the screws
3
17016015014013012011010090807060504030201005 15 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165
Assembly Instructions
Step 1
Fixing to wall.
It is recommended that
the unit is fixed to a wall.
Mark fixing hole on wall.
A
!
Note: The correct type of wall
screws must be used for your
wall. Please seek professional
advice if in doubt.
Fasten wall strap to the
wall using a suitable wall
screw/plug system.
Warning:
!
Before drilling,
check wall for
hidden pipes
and cables.
A
Step 2
Fixing to unit.
With the help of another
person move the unit into
position.
Place the wall strap on the
top of the unit.
!
178 cm
C
B
A
Fasten the wall strap to
the unit with screw and
washer .
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
B
C
4
Loading...