Page 1
Kids Scandinavia - Table And 2 Chairs
Assembly Instructions
Retain these instructions for future reference
498/1699
503/4459
Dimensions
Table
Width - 50cm
Depth - 45cm
Height - 52cm
Chair
Width - 36cm
Depth - 35cm
Height - 60cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Issue 2 - 07/11/2016
Page 2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Do not use this item if any
components are missing or
damaged.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product is suitable for
children in the age range which
the product is designed, 3-6
years.
• The maximum child weight
or load for the product is 30
kilograms.
• Assembly to be carried out by
a competent adult only
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Page 3
If you have damaged or missing components,
Components - Panels
call the Customer Helpline:
Please check you have all the panels listed below
Table top (50 x 45cm)
1
underside
03456 400 800
Left leg x2
3
(60 x 34cm)
Right leg
4
(60 x 34cm)
Short rail x 2
8
(33 x 5cm)
Long rail x 2
9
(38 x 5cm)
Table leg
2
(50.2 x 4.5cm)
Top plinth x2 (28 x 8cm)
5
Side rail x4 (28 x 5cm)
6
Seat x2 (36 x 34.8cm)
7
2
Page 4
Components - Fittings
Please check you have all the ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
A
80mm Screw x 4
D
Allen key x 1
G
Nut x 4
B
Washer x 4
E
50mm Screw x 18
H
Nut x 4
C
70mm Screw x 12
F
30mm Dowel x 14
I
15mm Screw x 16
J
Border tt x 4
Tools required
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Spanner
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
3
105
110 115 120 125 130 135 140 145 150 155 160 165 170
Page 5
Components - Key Diagram Table
1
8 9
2
2
2
2
Components - Key Diagram Chair
5
7
6
6
4
3
4
Page 6
Assembly Instructions
Assembly of
the table
Step 1
Assemble rails
a: Fix all border tts
to the long rails 9 with
screws I.
J
a:
I
J
8
I
9
J
I
J
J
I
8
9
b: Fix short rails
pre assembled long rails
with screws I.
to
8
b:
8
I
8
I
I
I
Chamfers down
5
Page 7
Assembly Instructions
Step 2
Fix top to pre
assembled rails
Put dowels F into table
top1.
assemble pre assembled
rails to the pre-inserted
dowel F on top1.
Fix rails with screws E.
E
F
E
E
E
E
F
Step 3
Mounting the table legs
onto the table top.
a: Put the nut
2
and x with screw A .
H
in leg
1
a:
H
H
A
A
6
Page 8
Assembly Instructions
Step 4
b: Press the table legs
2
onto the table top 1.
Fix the table legs, using
nut G, washers B and
spanner through the
holes indicated.
b:
B
G
2
2
2
2
Assembly of
the chair
Step 1
Inserting the dowels to
the top plinth and side
rails.
Insert the dowels F into
the holes indicated on
the top plinth 5 and the
side rails 6.
7
Page 9
Assembly Instructions
Step 2
Mounting the top plinth
and the side rails onto
the left leg.
Press the top plinth 5
and the side rails 6
onto the left leg 3.
Fix the top plinth and
the side rails using
screws C and allen key
D
through the holes
indicated.
Step 4
Mounting the right leg
onto the top plinth and
the side rails.
Press the right leg 4
onto the top plinth 5
and the side rails 6.
Fix the right leg using
screws C and allen key
D
through the holes
indicated.
8
Page 10
Assembly Instructions
Step 5
Adding the seat to the
chair.
Fix the side rails 6 onto
the seat 7 using screws
through the holes
E
indicated.
Repeat with remaining
chair
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
9
Page 11
Dear Customer
Please note that the product you have purchased is a
natural living timber.
Just like nature itself, wood varies in shape and colour.
Knots, vein patterns, resin pockets and colour differences
contribute to giving the piece of furniture its beauty and
form - a natural part of solid wood.
Although the tree has been cut down and dried, it is still
alive and therefore will react to high and low
temperatures, light, humidity, drought and time.
In cold and dry periods, the wood contracts which may
lead to small cracks in the piece of furniture. The reverse
happens in warm and humid periods where the wood
expands and this may result in slight unevenness.
The colour of the wood also changes with time,
particularly if the furniture is placed in a light place. This
is a natural process and part of owning a piece of
furniture made of solid wood.
Any flexing that has occurred during transport will
re-correct itself once this product is correctly assembled.
Tighten all joints of the furniture after six months.
Please keep these instructions in a safe place for future
use.
10
Loading...