Argos 4328104, 4596101, 4767002 ASSEMBLY INSTRUCTIONS
Boltzero Midisleeper
Assembly Instructions - Please keep for future reference
432/8104
Dimensions
Width - 1980mm
Depth - 960mm
Height - 1150mm
Important
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
- Please read these instructions fully before starting assembly
Issue 1 - 24/08/15
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
Warnings
• READ CAREFULLY - RETAIN
FOR FUTURE REFERENCE
• WARNING: High beds and
upper bed of bunk beds are not
suitable for children under six
years due to the risk of injury
from falls.
• WARNING: Bunk beds and
high beds can present a serious
risk of injury from strangulation if
not used correctly. Never attach
or hang items to any part of the
bunk bed that are not designed
to be used with the bed, for
example, but not limited to
ropes, strings, cords, hooks,
belts and bags.
• WARNING: Children can
become trapped between the
bed and the wall, a roof pitch,
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
the ceiling, adjoining pieces of
furniture (e.g. cupboards) and
the like. To avoid risk of serious
injury the distance between the
top safety barrier and the
adjoining structure shall not
exceed 75mm or shall be more
than 230mm.
• WARNING: Do not use the
bunk bed/high bed if any
structural part is broken or
missing.
• Always follow the
manufacturer’s instructions.
• The recommended size of the
mattress is L1900 x W900mm.
• Ventilation of the room is
necessary in order to keep the
humidity low and to prevent
mould in and around the bed.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Unit weight: 24kgs.
• Assembly instructions
including a list of the parts
supplied and details of any tools
required to assemble the bed
are included in the pack.
• The maximum thickness of the
mattress is 190mm. Mattress
maximum thickness marking on
the product are found on the
post.
• Check regularly that all
assembly fastenings are
properly tightened.
• THIS BED COMPLIES WITH
EN747-1:2012+EN747-2:2012
Manufacturer:
BL Packaging Pte Ltd
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
1
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
If you have damaged or missing components, call the
Components - Parts
Customer Helpline: Argos = 0345 640 0800
Please check you have all the parts listed below
sticker (1) sticker (2)
End Post x 3
1
(115 x 5 x 5cm)
Side Rail x 2
3
(90 x 39.5 x 4.5cm)
Back Safety Rail
5
(192.2 x 40 x 3cm)
Front Right End Post
2
(115 x 5 x 5cm)
Front Safety Rail
4
(192.2 x 40 x 3cm)
Slat x 6
6
(92.5 x 26 x 2.5cm)
Ladder
7
(87 x 37 x 8cm)
2
Loading...