3x3M Gazebo
Assembly Instructions
- Please keep for future reference
314/7908
Dimensions
Width - 300cm
Depth - 300cm
Height - 260cm
Important
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
- Please read these instructions fully before starting assembly
Issue 2 - 20 /06/14
IMPORTANT SAFETY INSTRUCTIONS
Read all instruction before using and keep for future reference
Read these instructions
carefully and familiarise
yourself with the procedure
before assembling the unit.
when assembly. Please keep
children under direct supervision
of adult when using.
four persons under light or no
wind conditions.
Check that you have all the
component parts following the
list on the page 3 and
familiarise yourself with each
part before proceeding.
Take all the fittings out of the
plastic bag and separate them
into their groups.
Ensure you have enough
space to lay out all the parts
before assembly.
To avoid scratching it is
recommended that you
assemble the unit on a soft
level surface.
CAUTION
under windy condition.
secure the gazebo when using.
structure and should be
disassembled and stored away
after using.
until completely dry.
erect in windy conditions.
from screws, nails, staples,
hooks, etc to avoid damage to
the fabric and frame.
Warning:
weigh s approximately
gs.
8
8. k
Please lift with care.
The unit
Fire precautions
near lights, fireplaces, gas
or electric heaters, candles,
radiators, or any other
sources of heat, fire or
flammable liquids.
Fabric cover that is not
retardant.
Safety
suffocation to animals or
children dispose of the
plastic bags immediately.
common sense when in use.
or around the Gazebo. We
recommend you advise no
smoking while inside.
Cleaning
with a damp cloth and mild
detergent, do not use bleach
or abrasive products.
retardant cooking area and
should not be use to house
BBQs or other cooking
methods.
1
If you have damaged or missing components, call the
Components - Parts
Customer Helpline: Argos = 0345 640 0800
Please check you have all the parts listed below
1
1xGazebo cover
4
4xCorner Joint
7 10
2
4xBase Plate
5
4xTop Pole (
8
18x1080mm)
φ
3
6
1xCentre Connector
4xTop Pole (
18x1080mm)
φ
8xSupport Pole( 22x1000mm)
11
4xLeg Pole( 24x1060mm)
φ
φ
4xSupport Pole( 22x975mm)
φ
4xLeg Pole( 24x1000mm)
φ
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
8x Peg 4x Guy Rope 4x Rope End
B
C
2
Assembly Instructions
Step 1
Assembling support
poles
Insert support pole
into the support pole
ensure all the poles are
fully inserted and secure.
8
7
Important note:
Because of the
size of this unit we
recommend that it
is built in the place
intended for using.
Ensure to locate
the unite on the
flat ground free
from obstruction,
in a sheltered area
away from wind
and heavy rain as
this will damage
the unit.
Step 2
7
4
8
7
8
7
7
7
Assembling corner
j
stnio
Use corner joints
4
to
connect the support poles
Ensure all the poles are
fully inserted and secure.
Note:
It would be useful
to ask someone to
help you at this
step.
4
7
4
8
4
4
3
Assembly Instructions
Step 3
Assembling top poles
Insert top poles into
the top poles .Ensure
6
5
all the poles are fully
inserted and secure..
Step 4
Assembling corner
j
connector
ertnec dna stnio
5
4
3
6
Connect the top pole to
corner joints and centre
connector
Note:
It would be useful
4
3
to ask someone to
help you at this
step.
4
5
6
4
5
6
4
4
4
Assembly Instructions
Step 5
Assembling Leg poles
insert leg poles into
the unite. Ensure all the
poles are fully inserted
and secure.
10
10
10
10
4
Note:
It would be useful
to ask someone to
help you at this
step.
Step 6
z
v
sre oc
Carefully place the
gazebo cover over
the assembled roof.
Then pull the gazebo
tightly over the
assembled roof frame.
1
10
1
obe ag gnilbmessA
Note:
5
It would be useful
to ask someone to
help you at this
step.
Assembly Instructions
Step 7
Assembling base plate
a:
insert the base plate
into the leg pole
2
11
insert leg poles into
b:
leg poles
the poles are fully inserted
and secure.
Note:
10
It would be useful
to ask someone to
help you at this
step.
11
Ensure all
Step 8
10
11
10
11
10
10
2
a:
2
b:
11
2
11
2
z
c:
use the velcro tapes
inside the gazebo cover
to fix it onto the
assembled frame
attach the gazebo
d:
cover's hooks into holes
on the leg poles
Tighten by moving the
hook to a lower hole.
Note:
It would be useful
to ask someone to
help you at this
step.
11
re oc obe ag gnixiF
v
c:
d:
11
2
6
Assembly Instructions
A
B
E
A
Step 9
Fitting the guy ropes
Attach on the guy
a:
rope so that the length
of guy ropes can be
adjusted.
C
B
C
C
attach the end of the
b:
guy rope to the corner
of the top cover ring on
the gazebo.Then attach
the other end to peg
and drive the peg into
the ground.
Repeat above steps to
assemble the other guy
ropes.
c:
the base plates .
B
use the peg to fix
A
2
A
C
B
B
B
a:
b:
Note:
the pegs are for
location purposes
only, they will not
support the unit in
high winds, see
above instructions.
B
B
B
2
b:
B
C
c:
7
Assembly Instructions
Step 10
Warning:
Do not assemble or
disassemble during
strong winds.
Drainage holes prevent
c:
rain water collecting.
a:
Assembly is complete.
Important note: always use this product with caution
and read the important safety instructions.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
8
Loading...