
Safety and Care Advice
4’ Bed Pink 957/6092
4’ Bed Grey 963/0354
4’ Bed Blue 955/9545
4’6 Bed Blush pink velvet 363/2255
4’6 Bed Silver mist velvet 342/1662
4’6 Bed Blue 960/9701
5’ Bed Grey 962/3787
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Cleaning Guidance
Minor stains and spillages
should be removed immediately
from cushion fabric, by wiping
over lightly with a damp cloth
and mild soapy water.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Light marking can also be
removed using this method.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
To remove more stubborn
stains or marking, a good
quality proprietary domestic
fabric cleaner can be used,
although it should first be
tested on and inconspicuous
area of the fabric.
Important Ottoman Safety Warnings
Caution.This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only where illustrated on the
product.
You must ensure the mattress is on the bed frame before lifting the mechanism - Failure to do so may
result in injury.
Please ensure Children and pets are kept away from the bed when operating the bed mechanism.
If removing the mattress, make sure that the frame is secured as it could flip open.
Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
No children or animals are left unattended when the frame is in the ‘up’ position.
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment - Keep both hands clear of mechanism when operating the mechanism.
When lifting the bed remove all bedding - Except the fitted sheet.
ENSURE MATTRESS IS ON
BEFORE LIFTING
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United Kingdom,
MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J Sainsbury's plc.
2
DON'T LIFT WITHOUT MATTRESS

Fittings (Shown to scale)
A
C
8x30mm Bolt x 26
E
Nut x 6
G
B
8x25mm Bolt x 208x45mm Bolt x 8
D
4x45mm Wood screw x 4
F
17mm Flat washer x 54
J
12mm Spring washer x 28
4x30mm Wood screw x 4
3

Parts
Side rail (Right) (4'/4'6-1930 × 300mm)
1
(5'-2030 × 300mm)
INSIDE
Side rail (Left) (4'/4'6-1930 × 300mm)
2
(5'-2030 × 300mm)
INSIDE
Footboard (4'-1310 × 300mm)
4
(4'6-1460 × 300mm)(5'-1610 × 300mm)
Foot x 4 (Ø3.5 x 15mm)
6
INSIDE
FRONT
Headboard (4'-1315 × 995mm)
3
(4'6-1465 × 995mm)(5'-1615 × 995mm)
Hinge (x 1 pair)
5
NOTE: PISTON ATTACHED
Fabric base x 1(4'-1960 ×1270mm)
7
(4'6-1960 ×1420mm)(5'-2060 ×1570mm)
Support Leg x 2 (25 × 205mm)
8
10 Ottoman end frame (Footboard) x 1
(4'-1213 × 85mm)(4'6-1363 × 85mm)
(5'-1513 × 85mm)
12 Ottoman frame centre support x 1
(4'/4'6-1822 x 30mm)(5'-1922 x 30mm)
4
Ottoman end frame (Headboard) x 1
9
(4'-1213 × 85mm)(4'6-1363 × 85mm)
(5'-1513 × 85mm)
NOTE:EXTRA HOLES
11
Ottoman frame (Sides) x 2
(4'/4'6-1822 x 30mm)(5'-1922 x 30mm)
13
Bentwood slats x 28 (4'-598 x 9 x 53mm)
Bentwood slats x 28 (4'6-675 x 9 x 53mm)
Bentwood slats x 30 (5'-750 x 9 x 53mm)

Parts
Double slat caps x 14 (4'-55mm)
14
Double slat caps x 14 (4'6-55mm)
Double slat caps x 15 (5'-55mm)
Ottoman frame support x 1
16
(130 × 30mm)
Stretcher x 1 (4'-1240 × 25mm)
15
Stretcher x 1 (4'6-1390 × 25mm)
Stretcher x 1 (5'-1540 × 25mm)
Mattress support
17
bracket x 2
Single slat caps x 28 (4'-55mm)
18
Single slat caps x 28 (4'6-55mm)
Single slat caps x 30 (5'-55mm)
5

Tools required
Allen key (Supplied)
Spanner (Supplied)
Box spanner (Supplied)
Ruler/tape
measure
Phillips screwdriver
(small & medium)
6

A
C
8x30mm Bolt x 26
E
Nut x 6
G
12mm Spring washer x 28
B
8x25mm Bolt x 208x45mm Bolt x 8
D
4x45mm Wood screw x 4
F
17mm Flat washer x 54
J
4x30mm Wood screw x 4
G
8x30mm Bolt x 16C17mm Flat washer x 16F12mm Spring washer x 16
Ensure surface is protected
to avoid marking.
C
G
F
C
G
3
F
2
4
Leave screws loose
F
5mm Allen key x 18x45mm Bolt x 2A17mm Flat washer x 2
A
F
16
A
F
16
4
7

8
5mm Allen key x 1
J
4x45mm Wood screw x 4
D
D
1
15
1
2
15
Do not fully tighten fixings!
3
1
C
3
4
1
2
Holes at
headboard end
Turn
Product

C
F
8
12
F
B
10
Turn
Product
5mm Allen key x 18x30mm Bolt x 10C17mm Flat washer x 10
F
8x25mm Bolt x 4B17mm Flat washer x 4F5mm Allen key x 1
Shown upside down
Beware of risk of entrapment
from folding hinges!
5
5
1
2
C
F
Holes on underside
1

8x25mm Bolt x 12B17mm Flat washer x 12F12mm Spring washer x 12G5mm Allen key x 1
Headboard end
Extra holes
9
Legs this
end
11
12
B
G
F
B
G
F
11
10
10
Headboard end
9
17
Footboard end
Shown upside down
Turn
Product
8x25mm Bolt x 4B17mm Flat washer x 4F5mm Allen key x 1
17
F
B
F
B
10
11

17mm Flat washer x 6
F
Nut x 6
E
5mm Allen key x 18x45mm Bolt x 6
A
9
10
Warning: Two people required.
Frame to be fully supported at all times!
2
1
UP
Nut pre-assembled
1
5
Box spanner x 1
A
11
5
F
E
12
Spanner x 1
Ensure frame is square
Beware of risk of entrapment
from folding hinges!
1
2
Repeat both sides
Important: Before proceeding,
check and ensure all screws and
fixings are fully tightened.
Repeat both sides