Page 1
Sandford Undersink Storage Unit
355/7732
60cm
30cm
60cm
Issue 1 - 09/29/14
Page 2
Page 3
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline:08456 400800
1
Left front leg
Right back leg Left side panel Right side panel
4
2
Left back leg
5
3
Right front leg
6
Bottom panel
7
10
Small wood block x 4
2
8
Top panel
Back panel x 2
11
9
Adjustable shelf
12
Door panel x 2
Page 4
Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
A
Locking Pin x 16
D
Φ4 x 12mm Screw x 16
G
Φ4 x 25mm Screw x 8
J
B C
Locking Nut x 16
E
Φ3 x 12mm Screw x 14
H
Wooden handle x 2
K
Cam cap x 12 Screw cap x 4
Tools
required
Phillips screwdriver
(medium & large)
Curved hinge x 4
F
Metal Support x 4
I
Φ4 x 25mm Screw x 4
Small
hammer
Flatblade screwdriver
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
(medium)
6mm Suitable drill bit
(for use with wall plug)
Hammer Drill
(Only for dril hole on the wall)
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
3
Page 5
Assembly Instructions
Step 1
Assembling left and right unit
Planform
Screw locking pin into left front
1
leg and left back leg .
A
2
B
Outside
1
5
2
Inside
Screw locking pin into left side
panel .
5
A
Attach left front leg and left back
leg onto left side panel,Insert
locking nut into left side panel ,
B
and tighten the locking nut to
secure the unit.
Repeat the above step to assembly
other side unit as shown.
A
B
2
B
A
5
1
A
A
B
A
Inside
B
A
A
A
3
A
Inside
4
A
B
B
A
6
B
B
A
4
Page 6
Assembly Instructions
Step 2
Assembling bottom panel
NOTE:It would be useful to ask
someone to help you at this stage.
6
Attach left side panel and right
side panel to bottom panle .
6
Insert locking nut into bottom
panel and tighten it to secure
7
5
7
B
the unit.
Step 3
Assembling top panel
a:
Screw locking pin into top panel
.
8
A
7
5
B
B
A
A
a:
A
8
b:
Carefully place the top panel
onto the unit.Insert locking nut
8
B
into left side panel and right side
panel.
Tighten the locking nut to
B
secure the unit.
b:
8
B
B
5
Page 7
Assembly Instructions
A
Step 8
Step 4
Assembling back panel
NOTE:It would be useful to ask
someone to help you at this stage.
E
Use 12mm screws to attach
back panels onto the unit as
shown.
Step 5
Assembling adjustable shelf
panel
NOTE:It would be useful to ask
someone to help you at this stage.
a:
Insert metal support into left &
right side panels.Carefully put the
adjustable shelf panel on it.
E
11
F
9
11
11
E
a:
F
9
b:
Use 25mm screw to fix small
wood block onto the left & right
unit as shown.
6
G
10
b:
G
G
G
G
G
10
Page 8
Assembly Instructions
A
Step 8
Step 6
Assembling door panel
a:
D
C
NOTE:It would be useful to ask
someone to help you at this stage.
a:
Use 12mm screws to fix curved
hinge onto door panels .
C
Use 25mm screws to fix handles
H
onto doors .
D
12
I
b:
Carefully attach door panels
12
to the unit by fixing curved hinge
onto the side panels with 12mm
screws .
D
Adjust the door up or down, left or
right, in or out if needed as shown:
1. Loosen two screws and adjust
D
the door up or down, then fix
screws again.
2. Loosen screw and adjust the
door left or right, then fix screw
D
C1
C1
again.
3. Loosen screw and adjust the
door in or out, then fix screw
C2
C2
again.
b:
D
C
12
I
H
1
D
12
2
D
D
12
12
C1
3
C2
c:
Use cam caps to cover the
J
visible cams
Use screw caps to cover
K
the visible screws
After above assembly, please
double check and make sure all
screws are firmly fixed before use.
7
c:
J
J
NOTE:If you have damaged or missing components,
call the Customer Helpline:08456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
K
K
J
K
Loading...