
Components
BRUNO LARGE SOFA
A
Seat Unit
1 x Left Back Cushion 1 x Centre Back Cushion
B
C
1 x Right Back Cushion
D
Simple Assembly Instructions - Please keep for future reference
336189
33879
3456541
1 x Left Ear
E
1 x Right Ear
F
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.

Assembly Instructions
Assembly Instructions
Preparing the Seat Unit
NOTE: It would be useful to ask
someone to help you at this
stage.
Step 1 ( Fig. 1)
- Carefully tilt back the seat
unit onto it's back.
See fig.1.
Step 2 ( Fig. 2)
-Get the spanner from Bracket Rear.
to remove the Wooden Frame
with a spanner.
(See Fig 2).
This is not required for any other use.
-Remove the EPE from the gap
between two seat.
See fig. 2.
Fig. 1
Fig.2
spanner
EPE
Stage 2 – Fitting the Back CushionsStage 1 –
NOTE: It would be useful to ask
someone to help you at this
stage.
1.
Attach the Left B ,
and Right
to the seat unit .
Then engage the metal locks and
push them together until you hear
them lock into position.
Attach the ear
2.
B
.Attach the ear
See fig.4.
.
D
3.
Fit the velcro cover on
the back cushions onto the
velcro of the seat unit.
Back Cushions
Centre
A
E
to the back cushion
to the back cushion
F
C
D
B
E
Metal Lock
C
A
fig. 4
D
F
Step 3 ( Fig. 3)
The ear is put behind of seat cushion
Please get ear
See fig. 3.
for assembly
F
E
Fig.3
NOTE: Carefully line up the
two side metal locks.
Ensure they align
correctly.
NOTE: You can ensure the Back
Cushions are closely joined
together by adjusting the
metal frame as show in fig. 5.
F
F
E
fig. 5

Assembly Instructions
Back and Foot Rest Adjustment
This Chair features a reclining back
rest and raised foot rest. You need
to be sitting in the chair to activate
the features.
1. Pull the "Adjustment Lever" then
gently lean back. The chair will
recline and the foot rest will
automatically lift up.
See fig. 6.
2. Sit up and lock the foot rest.
The sofa return to the normal
position.
See fig.6.
3. Adjust the recliner to your own
requirements.
Assembly Instructions
Stage 4 – Finishing the UnitStage 3 – Operating the Unit
1. Finally carefully place the unit in
the desired location.
See fig. 7.
CAUTION:
- Beware of entrapment. Keep
hands and fingers clear of the
tilt mechanism when operating
the controls.
- Ensure that children or pets are
not playing or lying in the way
when the tilt mechanism is
operated.
- Prevent children from playing
on the furniture or with the
controls.
fig. 7
Adjustment
Lever
fig. 6
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
Fitting
From time to time please ensure there are no loose screws on the product.
If you need help or have damaged or missing parts,call the Customer Helpline:
0345 640 0800
489-499 Avebury Boulevard Milton Keynes MK9 2NW,Argos Limited