Hartley Glass Dining Table
Assembly Instructions - Please keep for future reference
331/1538
Dimensions
Width - 160cm
Depth - 90cm
Height - 75cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing part s, call the Customer Helpline:
Argos = 0345 6400800
Issue 1 - 25/10/14
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
that all bolts and fi ttings are
tightend properly.
Glass Safty
• Keep these instruction for future
reference.
• Imported by:
Argos Ltd.
489-499 Avebury Boulevard.
Saxon Gate West.
Central Milton Keynes.
MK9 2NW
Warning:
(a) Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats
are used to prevent such items from coming into contact with the glass.
(b) Do not sit or stand upon the glass surface(s).
(c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
(d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if
necessary, do not use washing powders or any other substance containing abrasives since these
substances scratch glass.
• If the glass is chipped or broken, stop using the product and
consult the Manufacturer or Supplier.
• Batch No: 545962 （按订单PO号）
• Date of Manufacture: Nov.2014（按出货年月）
• Type of glass used: 8mm toughened glass
1
If you have damaged or missing components, call the
Components - Panels
Customer Helpline: Argos = 0345 6400800
Please check you have all the panels listed below
1
Table leg x 2
(104.6 x 7cm)
Support bar
4
(87.7 x 6.2cm)
Table leg x 2
2
(104.6 x 7cm)
Table top
5
(160 x 90cm)
Support bar
3
(87.7 x 6.2cm)
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
40mm Bolt x 4
D
Plain washer x 8
G
Cap x 4
J
Hex key X 1
B
50mm Bolt x 2
E
Nut x 4
H
Wooden dowel X 8
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
105
C
80mm Screw x 4
F
Connector x 4
I
Wrench X 1
110 115 120 125 130 135 140 145 150 155 160 165 170
The bolts length is measured from the head to the point (40mm bolt shown)..
2
Assembly Instructions
Step 1
Assemble table legs
a
:Fix table leg and
by using bolt , wooden
dowels .
H
1 2
B
a:
B
H
2
1
H
b :Fix screws and insert
wooden dowels into
table legs.
C
H
b:
C
H
3
Assembly Instructions
Step 2
Assemble support bars
a:Attach support bars
and to table legs, then
fix with connectors ,
plain washers and nuts
E
3
4
F
D
a:
3
E
D
F
4
The support bars and
shall be in parallel after
assembled.
3
4
:Fix another leg frame
b
with connectors , plain
washers and nuts .
D
F
E
b:
F
E
D
Important note: Do not fully tighten bolts at this stage.
4
Assembly Instructions
Step 3
Assemble table top
Two people are needed
here.
Place table top upside
down on a clean protected
surface.
Fix the assembled unit
frame onto table top using
bolts , plain washers .
5
A
D
Important note: After all the parts are positioned, you
can now fully tighten all bolts fixed on previous steps.
A
D
5
Step 4
Assemble cap
Cover the holes by using
G
caps as shown.
Turn the table upright.
Remove the plastic film
on table top.
Assemble is complete
G
G
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Loading...