Rattan 4 Seater Set - Coffee Table
Assembly Instructions - Please keep for future reference
3459311
2935609
Dimensions
Width - 110cm
Depth - 53cm
Height - 38cm
Important –
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Please read these instructions fully before starting assembly
Issue 1 - 26/09/13
This product is
manufactured from
toughened safety glass.
In the unlikely event that
the glass fails it will break
in to a large number of
small fragments that may
be spread over a wide
area. This is a feature of
toughened glass,
designed to remove the
risk of injure from glass
breaking into large shards.
If the glass is chipped
or broken, stop using the
product and consult the
manufacture
Check you have all the
or supplier.
components and tools
listed on page 2.
Remove all fittings from
the plastic bags and
separate them into their
groups.
Keep children and
animals away from the
work area, small parts
could choke if swallowed.
Make sure you have
enough space to layout
the parts before starting.
Do not stand or put
weight on the parts during
assembly, this could
cause
damage.
Assemble on a soft
level surface to avoid
damaging the unit or your
floor.
Dispose of all packing
carefully and responsibly.
Do not sit or stand on
this table.
Do not place very hot or
very cold items on the
glass.
Warning:
weights approximately
14.2
21.9kgs.
Please lift with care.
The unit
Wash glass with mild
soap and water, rinse
thoroughly, and dry glass
completely.
When moving
remove the umbrella. Do
not drag.
We recommend the use
the table,
of furniture covers when
not in use.
Do not use the glass as
chopping surface. Do not
strike the glass with hard
or pointed items.
In order to prolong the
life and beauty of your
table, we recommend it be
stored in a dry and
protected area during off
season periods.
Do not use washing
powders or any abrasive
substances which may
scratc
h the surface.
If you have damaged or missing components,
Components - Parts
call the Customer Helpline: 03456 400 800
Please check you have all the parts listed below
1
Right Side board x 1
2
Left Side board x 1
3
Base board x 1
4
Components - Parts
Please check you have all the fittings listed below
Note:
The quantities
fittings may be supplied than are required.
A
20mm Screw x 8
Tools required
below are the correct amount to complete the assembly. In some cases more
B
Metal washer x 8
Glass x 1
C
Allen key x 1
Allen key x 1
2
Assembly Instructions
Step 1
Assembly frame
Use 20mm screw
and metal washer B
to fix the base board 3
to the side board
Important:
Do not fully
tighten all screws
until assembly is
complete.
A
2
1
.
2
3
1
B
A
Step 2
Fit the glass 4
onto the two side
2
boards carefully.
1
1
Tighten all the
screws.
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Argos Limited
489-499 Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks,MK9 2NW
3
4
2
3
Loading...