
Milan 6 Seater Patio Set
Assembly Instructions - 
Please keep for future reference
290/5464
Dimensions
Width - 80cm 
Depth - 130cm 
Height - 72cm
Important –
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
 Please read these instructions fully before starting assembly
Issue 1 - 26/05/10

  This product is 
manufactured from 
toughened safety glass. 
In the unlikely event that 
the glass fails it will break 
in to a large number of 
small fragments that may 
be spread over a wide 
area. This is a feature of 
toughened glass, 
designed to remove the 
risk of injure from glass 
breaking into large shards.
  If the glass is chipped 
or broken, stop using the 
product and consult the 
manufacture 
  Check you have all the 
or supplier.
components and tools 
listed on page 2.
  Remove all fittings from 
the plastic bags and 
separate them into their 
groups.
  Keep children and 
animals away from the 
work area, small parts 
could choke if swallowed.
  Make sure you have 
enough space to layout 
the parts before starting.
  Do not stand or put 
weight on the parts during 
assembly, this could 
cause
 damage.
  Assemble on a soft 
level surface to avoid 
damaging the unit or your 
floor.
  Dispose of all packing 
carefully and responsibly
  Do not sit or stand upon 
horizontal   glass surface.
  Do not place very hot or 
very cold items on the 
glass
thick tablemats are used to 
prevent such items from 
coming into contact with 
the glass.
  Warning:
weights approximately 
21 .0 8  kg.
Please lift with care.
 unless adequately
 The unit 
.
Wash frame p 
mild soap and water, rinse 
thoroughly, and dry frame 
completely. Do not use 
b leach, acid, or other 
solvents on the frame 
parts.
Wash glass with mild 
soap and water, rinse 
thoroughly, and dry glass 
completely.
arts with 
When moving the table, 
remove the umbrella. Do 
not drag.
We recommend the use 
of furniture covers when 
not in use.
Do not use the glass as 
chopping surface. Do not 
strike the glass with 
or pointed items.
 hard 
In order to prolong the 
life and beauty of your 
table, we recomm end it be 
stored in a dry and 
protected area during off 
season periods.
Do not use washing 
powders or any abrasive 
substances which may 
scratch the surface. 

Components - Parts
Please check you have all the parts listed below
1
Table top x 1
3
Glass x 1 
2
Components - Fittings
Please check you have all the fittings listed below
Table leg x 4
Note:
 The quantities
A
 6 mm Screw x 16
D
Allen key x 1
below are the correct amount to complete the assembly.
B
Meta washer x 16
Metal washer x 16
E
(Prefixed on the table rim)
Plastic support
 x 13
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
C
Plastic 
(Prefixed on the table rim)
 cap x 1
2

Assembly Instructions
Step 1
Assembly frame
Suggest to complete this 
product assembly by two 
person.
Place the table top rim 1 
on a non-abrasive surface, 
such as carpet,with the 
underside facing up.
1
Step 2
A
wercS mm 6 esU
washers
 to fix table legs 
top 
the table legs are in the 
correct position.
Tighten all the screws.
B
1
     Please make sure
 .
Important:
Do not fully 
tighten all screws 
until assembly is 
complete.
 and 
allen key
2
 to table 
latem ,
D
2
1
2
1
D
A
B
3

Assembly Instructions
Step 3
Turn the table to its upright
position and put on 
glass 3 .
the 
E
3
Important:
Make sure the 
plastic support 
not detached from 
table rim. 
E
Step 4
Please remove the cap   if 
if you want to insert parasol.
Warning: 
The parasol must be 
placed into the parasol's 
base if the table set need 
to match a parasol.
C
C
Assembly is complete.
If you need help or have damaged or missing parts, call the 
Argos Limited
489-499 Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks,MK9 2
008004 654 30 :enilpleH remotsuC
4