Argos 2328450, 2684321, 2278380, 2745253, 2749716 Assembly Instructions Manual
...
New Hallingford
2 Door 3 Drawer Wardrobe
Dimensions
Width - 99,7cm
Depth - 60,3cm
Height -205,7cm
Issue 7 20-12-2016
Assembly Instructions - Please keep for future reference
2498696
2684321
2599409
2328450
2274951
Tip: To prevent damage,
we recommend that you
build your unit on the
carton(s) it was packed in.
DR899054
Important – Please read these instructions fully before starting assembly
Alternatively, call the Spares Helpline on: 0370 112 1928
For any other queries please contact the Customer Helpline on: 0345 640 2020
If you need help or have damaged or missing parts, please visit: www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
1
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
• Remove all fittings from the
plastic bags and separate them
into their groups.
unit or your floor.
to its final position (in the same
•To reduce the
likelihood of
damaging your
product please
ensure that your
• Dispose of all packaging
carefully and responsibly.
power drill is set on a low torque
setting.
Warning: Only use a manual
screwdriver to attach the hinges.
Instruction video
• This manual is provided with an additional instruction
video. If the icon on the right is displayed at a particular
step in the manual, Follow the link: http://nlink.nu/vid01
Or scan the QR code on the left with your phone.
See page 1 for link
to instruction video!
Components - Panels
Please check you have all the panels listed below
2
Right side
(205.6 x 58cm)
2
P2349C
Left side
(205.6 x 58cm)
1
P2349C
Door x 1
(199.2 x 48.8cm)
4
P3724
Top/Bottom x 2
(96.7 x 57.7cm)
5
P1341
Upright small
(47.5 x 57.7cm)
6
P2893
Large horizontal
(96.7 x 57.6cm)
7
P1342
Small horizontal
(47.6 x 57.6cm)
8
P1343
Drawer base x 2
(45.4 x 34.9cm)
BO3395509B
Drawer base x 1
(45.4 x 34.9cm)
BO3395509B60
Drawer wrap x 3
(35 x 46.7 x 10cm)
10
LA186909
Drawer front x 3
(48.8 x 15.7cm)
11
P4315
Plinth front
(96.6 x 14cm)
13
P7334C
Plinth back
(96.6 x 5.4cm)
14
P7335C
Pelmet
(99.9 x 4.5cm)
15
FA247
Foldy back
(199.3 x 98cm)
12
BO339330960/
BO33933160 (CAT2328450)
Mirror door small
(151.2 x 48.8cm)
3
PS3719
For damaged or missing parts, please visit:
www.argos-support.co.uk or email: Help@ClickSpares.co.uk
9a 9b
3
Please check you have all the fittings listed below
40mm Screw x 6
Ruler - Use this ruler to help correctly identify the screws
Tools required
A
10mm Fixing screw drawer x 12
E
B
24mm locking screw x 6
H
9mm Srew x 6
C
I
Door/Drawer handle x 5
Q
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
12.5 mm Screw x 2
F
L-Bracket x 1
15mm Screw x 13
D
Nail x 60
K
15mm Screw x 12
O
Large locking
nut x 22
M
P
Small locking
nut x 6
N
Nail holder x 1
L
G
J
Hinge door x 6
R
Runner x 6
S
T
For damaged or missing parts, please visit:
www.argos-support.co.uk or email: Help@ClickSpares.co.uk
Fittings Drawers
Fittings Carcase
Components - Fittings
Phillips screwdriver
(medium & large)
Flatblade screwdriver
Small
hammer
Ruler/tape
measure
Drill
Eye protection
(when using a
hammer or drill)
5mm Suitable drill bit
GR1975
Hanger rail large x 1
FK1268FK1269
Hinge back x 6
FK1324
FK1012
FK1010
FK1011
24mm locking screw x 22
H
FK1011
FK1301
FK1981
FK1980
FK1400
FK1311
FK1235
Hanger rail support x 2
FK1217
FK1309
Peg x 2
FK1234
FA1515 FK1419
PM1884
PM16951
5mm Suitable drill bit
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Stairs
Piercer
Scissors
(medium)
(small)
Spirit level
Setsquare
U
Drawerbase support x 6
FK1250
V
Wall plug and parkerscrew x 1
ZF99936
20mm Screw x 10
Glue x 1
FA1510
X
4
Assembly Instructions
Step 1
Drawer assembly x 3
a: Insert two small locking
nuts J into drawer wrap
0.
Make sure the ‘arrow’ on
Jis pointing towards the
hole in the edge of 0.
b: Screw 24mm locking
screws H into holes
shown on back of drawer
front !.
Make sure 24mm locking
screws H are tightened
right up against drawer
front !.
c: Slide drawer base 9
into grooves shown on
drawer wrap 0.
H
10
J
J
11
H
H
H
a:
b
10
c:
11
9 a/b
Loading...