Argos 2741, 2742 ASSEMBLY INSTRUCTIONS

2741 2742
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 0778888
Care and User Instructions - Please keep for future reference
Important - Please read these instructions fully before using the product
Issue 1 - 08.06.2012
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Make sure you have enough space to
work and layout the sofa.
• Once feet are securly attached return the sofa to
an upright position. To do this the sofa must be lifted and turned. Avoid using the feet as a lever as doing this may lead to damage.
• Assemble the sofa as close to its final
position (in the same room) as possible.
• Dispose of all packaging carefully and
responsibly.
With clean movements bring
the back cushions of the chair
back to their original shape.
Spread the leather evenly across the seat cushions with the palms
of your hands
Give the arm pads a good plump
and then straighten them as
shown.
• Assemble on a soft level surface to
avoid damaging the sofa or your floor.
• Parts of the assembly will be easier
with 2 people.
• Remove the protective cellophane
wrapping the sofa. Do not use sharp tools that may damage the sofa covering.
• Feet and accesories can be found by
opening the zip underneath the sofa. To access this zip spread the cellophane sheet on the floor, lower the sofa so that the rear back panel rests against the floor. Remove package containing the feet and accesories, then install the feet.
Before your furniture leaves the factory, it is given a final inspection prior to secure wrapping for distribution. Due to tight and secure wrapping to minimise movement during transit, when unwrapped, the chair may appear a little "distressed". This is entirely normal, and the illustrations below show how to rectify this in 3 easy steps:
Step 1
Step 2
Step 3
1
Issue 1 - 08.06.2012
Feet Assembly
A x 4 B x 1
ONLY FOR EXTRA
LARGE SOFA
A
A
B
A
A
2 Issue 1 - 08.06.2012
Loading...
+ 4 hidden pages