Knightsbridge Oak Console Table
Assembly Instructions - Please keep for future reference
259/3034
Dimensions
Width - 100cm
Depth - 32cm
Height - 75cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
issue 1 - 02/04/2014
!
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
Do not stand or put weight on
this product during assembly,
this could cause damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
From time to time check that
there are no loose screws on
this unit.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
1 2 Leg frame x 2 (71 x 29.5cm)3
Top frame x 1 (100 x 32 cm)
Shelf frame x 1 (83 x 17.5cm)
2
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
fittings may be supplied than are required.
A
M6x35mm Bolt x 8
Tools required
0
Ruler/tape
150140130120110100908070605040302010
measure
B
M6x55mm Bolt x 4
C
Allen key x 1
Ruler - Use this ruler to help correctly identify the screws
3
17016015014013012011010090807060504030201005 15 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165
Assembly Instructions
Step 1
Removing the drawers.
Pull the drawer out until it is
fully extended. Turn the
stopper to unlock. Pull the
drawer out of the top frame
. Place the drawer aside.
1
Repeat with the other
drawer.
1
Step 2
Attaching the leg frames.
With the help of another
person, turn the top frame
over carefully.
1
Attach leg frames to the
sides of the top frame
using bolts .Tighten with
allen key .
A
C
3
1
3
3
A
1
A
C
A
4
Assembly Instructions
Step 3
Securing the leg frames.
Attach the leg frames to
the top frame using
B
bolts through the holes
1
3
shown. Tighten with allen
C
key .
B
B
C
1
B
B
Step 4
Attaching shelf frame.
Position the shelf frame
between the side rails of leg
frames as shown.
Fix through holes on shelf
frame using bolts .
With the help of another
person, turn the table over
carefully .
3
2
2
A
A
A
C
2
A
A
1
5
Assembly Instructions
Step 5
Inserting drawers.
Slide the drawer onto the
runner .Turn the stopper
to lock.
Repeat with the other
drawer.
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
6
Loading...