New Penton - Bedside Chest
Assembly Instructions - Please keep for future reference
258/7129
237/8620
237/6684
Dimensions
Width - 45cm
Depth - 38cm
Height - 50cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Issue 1 - 14/05/14
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
The product has been treated
with a wax and oil finish to
prevent dirt ingress and preserve
moisture.
On unpacking the
furniture you may notice an
odour due to this treatment;
this will disappear once the
furniture is unpacked and
assembled after a period of time.
This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer
to clothing or carpeted surfaces
during assembly.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Care and maintenance
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
From time to time check
that there are no loose
screws on this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Components - Panels
Please check you have all the panels listed below
Top panel
1
(45 x 38cm)
Right side panel
2
(48 x 36cm)
top
Right front frame
5
(48 x 6.5cm)
underside
Base panel
7
(39.4 x 34.4cm)
Drawer front
9
(29.4 x 11.2cm)
Left front frame
6
(48 x 6.5cm)
Shelf
8
(39.4 x 34.4cm)
Drawer side x 2
10
(27.6 x 11.2cm)
top
Left side panel
3
(48 x 36cm)
Back panel
4
(41.2 x 41.2cm)
Drawer back
11
(27 x 11.2cm)
Side drawer runner x 2
13
(32.8 x 5.5cm)
Drawer bottom
15
(28 x 26.2cm)
Front frame
12
(34 x 4.5cm)
Block x 4
14
(6.6 x 2cm)
2
If you have damaged or missing components,
Components - Fittings
call the
Customer Helpline: 08456 400 800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A
Wooden dowel x 16
B
30mm Screw x 8 35mm Screw x 16
D E
50mm Screw x 4 22mm Bolt x 2
G
Locking
nut x 8
H
Drawer
handle x 1
J
Nail x 14
C
F
Metal dowel x 8
I
Shelf
support x 4
Tools required
Phillips screwdriver
(small & medium)
Small
hammer
Ruler - Use this ruler to help correctly identify the screws
5
0
10 15 20 25 30 35 40
55
45
50
60 65 70
75
80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
m
2
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
3
Assembly Instructions
Step 1
Fixing right front frame.
(Two people required for
an easier assembly).
a: Insert right side panel
2
into right front frame
5
through joints.
Note:
Before fixing the
blocks into
place it is important to
ensure that the slot and
groove of parts and
are fully pushed together
and lined up correctly at
the top and bottom.
b: Place blocks
between the two marks on
the front frame as shown.
First fix to the side panel
using screws .
14
2
14
C
5
a:
2
Attention: correct
position of panel.
5
Top
b:
C
14
Yes!No!
2
c:
C
14
14
c: Fix front frame through
blocks using screws
14
C
.
Step 2
Fixing left front frame.
(Two people required for
an easier assembly).
a: Insert left side panel
3
into left front frame
6
through joints.
Note:
Before fixing the
blocks into
place it is important to
ensure that the slot and
groove of parts and
are fully pushed together
and lined up correctly at
the top and bottom.
b: Place blocks
between the two marks on
the front frame as shown.
First fix to the side panel
using screws .
14
3
14
C
6
a: b: c:
6
3
Yes!No!
6
14
C
14
14
3
C
Attention: correct
position of panel.
Top
c: Fix front frame through
blocks using screws
14
C
.
4
Assembly Instructions
Step 3
Insert dowels into the
A
indicated parts.
Insert shelf support pins
I
into the right side
panel and left side
panel .
2
3
I
I
A
7
A
A
3
A
I
2x
A
13
A
I
2
Step 4
Fitting Metal dowels.
Screw metal dowels
into top panel and side
panels and .
2
1
Insert metalNote:
dowels as far as
shown.
Do not over tighten.
F
3
F
F
2
3
F
F
F
1
5
Assembly Instructions
Step 5
Attention!
Fixing side drawer
runner.
D
Fit side drawer runner
13
to the right side panel
then fix it using screws
D
as shown.
Attention!
To the correct
position of the dowel
inserted in the runner, as
shown in the diagram.
Repeat step 5 for the
left side panel and side
drawer runner.
Step 6
Assembling the cabinet.
Insert front frame into
hole on right side panel
2
.
12
13
2
13
2
12
Step 7
Assembling the cabinet.
With help, fit base panel
7
to the right side panel.
Make sure round edge is
facing front.
Insert 2 locking nuts
into base panel where
shown.
Use a screwdriver to turn
locking nuts clockwise
G
to lock.
Do not over tighten.
G
2
Round edge.
7
7
G
G
G
G
6
Assembly Instructions
Step 8
Assembling the cabinet.
With help, fit left side
panel to the base
panel and front frame
12
3
7
, as shown.
G
Insert 2 locking nuts
G
into base panel where
shown.
Use a screwdriver to turn
locking nuts clockwise
G
to lock.
Do not over tighten.
Important:
After attaching
side panel, with help,
carefully stand the
product upright.
Step 9
Fixing top panel.
3
G
G
12
7
G
With help, fit top panel
1
to the cabinet.
Insert 4 locking nuts
G
into side panels where
shown.
Use a screwdriver to turn
locking nuts clockwise
G
to lock.
Do not over tighten.
G
1
G
G
G
G
7
Assembly Instructions
Step 10
Position shelf into
place. Make sure round
edge is facing front.
8
Round edge.
8
8
Step 11
Fixing back panel.
Important:
Cabinet beMUST
‘square’ when back panel
is attached.
Attach back panel
using nails .
J
4
J
4
J
J
8
Assembly Instructions
Step 12
Drawer assembly.
a: Attach drawer sides
10
to the drawer front
9
using screws .
B
b: Slide drawer bottom
15
into slots on drawer
sides and position drawer
11
back in place.
c: Holding the drawer
11
back , press the drawer
sides and fix them using
screws .
B
a:
10
B
10
9
B
B
b:
11
15
c:
d:
B
d: Using bolts attach
the drawer handle to
the drawer front.
E
H
Step 13
Insert drawer into unit.
With the back of the
drawer past the front
frames, use a hammer to
tap dowels in flush to
drawer sides. This is a
safety catch to stop
drawer falling out.
A
E
H
Assembly is complete.
.
A A
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
9
Loading...