Argos 210.96.117 ASSEMBLY INSTRUCTIONS
Assembly Instructions
Step 3
4
1
using
A
to
as
Connect 6 x rails
the Left panel
6 x 35mm sc rew
shown. Rails will sit in pre
cut pilot holes.
Assembly Instructions
Multi function combo storage
Step 6
A
4
1
Set the storge boxes
onto the rails as shown.
Add Pocket storage base
x 2
10
10
Assembly Instructions - please keep for future reference
183/5274
Step 4
Slide pocket storage
and 6 slot storage
over rails attached to
left panel as shown.
Insert rail through
1
5
middle section of the
into pre cut pilot holes
the left side panel.
in
Conect rails to middle
panel using 6 x
35mm screws A.
2
A
9
8
A
Step 7
E
C
On reverse attach wall
bracket using 2 x
screws
Using 35mm wall
5
plug and screw
screw sercure
C
D
B
E
D
B
storage unit to wall.
2
9
1
Assembly complete
8
Step 5
Expand the boxes
6
and insert a
box base
7
in each.
6 6
Dimensions
Width - 70cm
7
Depth - 28cm
Height - 90cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the
65
Customer Helpline: 0845 640 0800
Issue 1 - 27/09/13
Safety and Care Advice
Components - Panels
Components - Fittings
If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
Important – Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 3 and 4.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• We do not
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
Care and maintenance
• Only clean using a damp
cloth and mild detergent, do
no use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
recommend the
use of power
drill/drivers for
inserting screws ,
Please check you have all the panels listed below
1
Left panel x 1
(90(h)cm x 28(d)cm)
2
Middle panel x 1
(90(h)cm x 28(d)cm)
3
Right panel x 1
(90(h)cm x 28(d)cm)
Note:
may be supplied than are required.
A
35mm Screw x 24
D
10 mm screw x 2
B
Wall Plug x 1
E
30 mm screw x 1
Tools required
Crosshead screwdriver
Ruler – Use this ruler to help correctly identify the screws and parts
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
Assembly Instructions
C
Wall Bracket x 1
5
Rail x 4
4
Rail x 12
(34(w)cm x 1.8(dia)cm)
7
Box base x 3
(28(w)cm x 24.5(d)cm)
10
Pocket storage base x 2
(19.5(w)cm x 14.5(d)cm)
2
3
(35(w)cm x 1.8(dia)cm)
8
6 slot storage x 1
(32(w)cm x 30(d)cm)
6
Box x 3
(28.5(w)cm x 25(d)cm)
9
Pocket storage x 1
(32(w)cm x 30(d)cm)
Connect 6 x rails
the right panel
6 x 35mm sc rew
shown. Rails will sit in pre
cut pilot holes.
Pilot holes in middle
panel and right
panel will support
3 x rails
Note: These will not
need screws
Connect rails to middle
panel with 6 x
35mm screws as
shown.
4
Step 1
Step 2
4
to
3
using
A
as
3
4
4
4
A
2
3
5
2
A
4
4
4
5
2
5
5
A
3
Loading...