Argo CULT Operating Instructions Manual

6

V 05/15

OPERATING INSTRUCTIONS

Read the instructions carefully before installing and operating the appliance or performing
maintenance operations. Observe all the safety instructions; failure to observe the instructions may
cause accidents and/or damages. Store these instructions for future reference.

CERAMIC FAN HEATER

EN

7

V 05/15

GENERAL SAFETY INFORMATION

• Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,
electric shock or injury to people.

• Ensure that the mains power complies with the voltage specified on the fan heater data plate (220-240V~50Hz).

• This product is not a toy. Children of less than 3 years should be kept away unless

continuously supervised.

• This device is not intended for persons (including children) with reduced physical, sensory
or mental capabilities, or without the necessary experience and knowledge, unless they
have received the necessary supervision or instruction concerning use of the appliance by
a person responsible for their safety.

• Children aged from 3 and less than 8 years shall only switch on/off the appliance provided
that it has been placed or installed in its intended normal operating position and they have
been given instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children aged from 3 years and les than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.

CAUTION - Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.

WARNING: In order to avoid hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through and external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.

WARNING: do not use the fan heater with a controller or any other external device
that activates the appliance automatically, as there may be a risk of fire if the fan
heater is covered or incorrectly positioned.

• Do not restrict the air inlet and outlet grilles.

• The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.

• Ensure that all objects are at least 1 meter from the front and sides of the appliance.

• Disconnect the mains power when the appliance is not used or for cleaning operations.

• Avoid using the fan heater in dusty environments or in the presence of inflammable vapors (e.g. in workshops or garages)

or paint vapors.

• Do not place anything on the appliance, use the appliance to dry clothing.

• Use the appliance in a well-ventilated area.

• Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may

damage the appliance.

• To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates.

• Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced

by the service centre so as to avoid any safety risks.

• Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical
personnel to examine the appliance or perform any electrical or mechanical repairs.

• The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the
appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.

• Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.

• To disconnect the fan heater, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid
pulling on the cord when disconnecting the fan heater.

• Do not place any objects on the cord and do not bend it.

• It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension

cord to operate multiple appliances.

• Do not immerse the cord, plug or any other element of the appliance in water or other liquids.

• Do not touch the plug with wet hands.

• Do not place the fan heater above or near another heat source.