data sheet
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. ARGCO and its agents cannot
assume liability or responsibility for results obtained in the use of its product by persons whose methods are outside or beyond our control. It is the
user's responsibility to determine the suitability of any of the products, methods of use, or preparation prior to use, mentioned in our literature. It is
the user's responsibility to observe and adapt such precautions as may be advisable for the protection of personnel and property in the handling and
use of any of our products.
FOR MORE INFORMATION CALL ARGCO AT 1-800-854-1015
OR LOG ONTO WWW.ARGCO.COM
DESCRIPTION
Duct Fixing Angle Twin Type 1 (Z)
Duct Fixing Angle Twin Type 2 (Z)
Item #
25-40-176
25-40-171
DUCT FIXING TWIN ANGLE (Z)
•Horizontally fastens to top or bottom of beam
•Easy to install suspension for air ducts
•Features rubber sound insulation
•Easy alignment and height adjustment with threaded rod
•Holes to fasten to air duct with rivets, self-drilling screws or bolts
•Zinc plated steel 1/8” thick for 3/8” rod
•Ideal for hanging furnaces
Max.
Rec.Load
52 lbs.
180 lbs.
Duct Fixing Twin Angle
Type 1
Duct Fixing Twin Angle Type 2
2-1/2”
1-13/16”
3/16”
1-1/4”
1-1/2”
3-1/2”
1-9/16”
3/16”
1-15/16”
3/16”
5/16” x 1/2”
5/8”
5/8”
3/16”
5/16” x 13/16”
13/16”
5/16”
1-5/8”
Loading...