ARESON Technology CL0013 User Manual

2.4GHz
Wireless Presenter
P06
User's Guide
2-in-1
Wireless Presenter
Laser Pointer
INTRODUCTION
Presenter
Safety Notice
This product complies with IEC 60825-1, Class II laser product.
Your product complies with FCC and CE rules.
Page up
Esc/F5
Laser pointer
Page down
Laser pointer &
Low battery indicator
ID reset button
Power On/Off
Black screen
Power On/Off
indicator
button
Please DO NOT direct the laser beam at anyone's eyes.
1. Insert the batteries
A. Open the battery cover on the back of the presenter
Features
Consolidating 2.4GHz wireless presenter technology.
B. Fit in the battery according to the diagram indicated in the battery compartment. C. Close the battery cover.
2-in-1 design: a laser pointer, and a remote presenter while users
have presentation toward audience.
16 channels with 2 ID. No interference!
Wide range and long transmission distance of Max. 10M.
Page up / down between presentation slides.
Laser pointer
24
Battery
Compartment
2032 Lithium
Battery
Battery cover
Presentation buttons: Slide forward / back, Black screen, Esc/F5
Power on / off button for saves battery power.
Plug and Play. No need to install driver.
Storable wireless receiver.
Smart-Link channel ID.
1 2
An incorrect battery placement may cause batteries over heat.
2. Connect the presenter and the receiver
A. Pull the receiver from the bottom of presenter. B. Plug receiver into the USB port of your PC
E
s
5
c
F
/
PC
USB port
3. Establish communication between the presenter and the receiver
A. Auto-link mode:
The presenter has auto-link function itself.
B. Manual mode:
If you find the communication channel does not connect well, you can use a software connection tool to re-connect the presenter & receiver to reset a new channel ID. You are able to download the software from your local brand vendor's website.
4. Operation
Persentation Buttons
ESC/F5 switchable button : Press ESC/F5 to escape/play Power Point
Black Screen :
Press the Black Screen button, the screen will be black during the presentation. Press any key to return.
Page up / down : Press Page Up / Down button to return or go to the next slide of Power Point.
Laser pointer : Use laser pointer to point what a user wants to point at the monitor.(Laser pointer indicator will be continuous on when you press laser pointer button)
Please DO NOT direct the laser beam at anyone's eye.
1
2 3
5. Power On / Off
ID links OK!
Execute ID connection software
3 4
Press ID reset button
Power on : Press power button( ) 3 seconds to power on and LED will be continuous on 6 seconds. Power off : Press power button( ) 3 seconds to power off and LED will flash.
Loading...