ARCTW AQS75D-5S, AQS75D-48S, AQS75D-24S, AQS75D-12S Datasheet

Din Rail Switching Power Supply
AQS75D SERIES 75 Watts
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319 -1-
PRELIMINARY
ELECTRICAL SPECIFICATIONS
Model No. AQS75D-5S AQS75D-12S AQS75D-24S AQS75D-48S Max output wattage (W)
75W 75W 75W 75W
Voltage
90-260 VAC or 120-370 VDC
Frequency (Hz)
47-63 Hz
Current (Full load)
2 A max. (115 VAC) / 1 A max. (230 VAC)
Inrush current (<2ms)
20 A max. (115 VAC) / 40 A max. (230 VAC)
Input
Leakage Current
1.5 mA max.
Voltage (V.DC.)
5V 12V 24V 48V
Voltage accuracy
±2% ±2% ±2% ±2%
Current (A) max
15000 6250 3130 1560
Line regulation (typ.)
±1% ±1% ±1% ±1%.
Load regulation (10-100%) (typ.)
±1% ±1% ±1% ±1%
Minimum load
0% 0% 0% 0%
Maximum capacitive load
470-23,000µF depending on model
Ripple & Noise (Vp-p)
50mV max 50mV max 50mV max 50mV max
Transient Recovery Time
300 uS
Efficiency
80% 83% 84% 86%
Hold-up time
20 ms min.
Output
Switching frequency
125 kHz 125 kHz 125 kHz 125 kHz
Over current protection
Auto recovery
Over voltage protection
Latch off
Short circuit protection
Auto recovery
Protection
Remote Sense
Compensate for 0.5V load drop min.
Isolation
Voltage (V.AC)
3000V 3000V 3000V 3000V
Operating temperature
0°C…+50°C
Storage temperature
-40°C…+85°C
Temperature coefficient
0.02%/°C 0.02%/°C 0.02%/°C 0.02%/°C
Humidity
95% RH
Environment
MTBF Pending Dimension (L x W x H)
4.53 x 3.54 x 1.59 Inches (115 x 90 x 40.5 mm)
Case
Plastic
Weight
g
Physical
Cooling method
Free air convection
Safety Agency approvals
Pending
EMI (Conducted & Radiated Emission)
Pending
EMC
EMS
(Noise Immunity)
Pending
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
KEY FEATURES
Din Rail Switching Power Supply Universal Input: 90-260 VAC Single Output 5 VDC to 48 VDC Output 3000 VAC Input to Output Isolation Ultra Compact Size: 4.53 x 3.54 x 1.59 Inches 2-Year Product Warranty
Din Rail Switching Power Supply
AQS75D SERIES 75 Watts
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319 -2-
MECHANICAL DIMENSION (Top View)
DERATING
BLOCK DIAGRAM
Loading...