Arctic Cooling VR005 Installation

Accessories Set VR005

Installation Manual

For further information, please consult www.arctic.ac

Compatibility

nVIDIA GeForce GTX 460

Accessories

Heatsinks x 5

Heatsinks x 1 Heatsinks x 11

Tips for applying thermal adhesive

RAM

How to squeeze out all the glue?

Voltage regulatorVoltage regulator

Heatsinks x 4

Screws (M3) x 2

Mounting plate x 1

*Thermal adhesive x 1

*Be aware that the thermal adhesive comes with a very
short shelf life and shall be used within 1 week. We
recommend storing the thermal adhesive in a cool area to
avoid solidification. Refrigerate after opening. Additional
heatsinks and thermal adhesive are available for purchase
at vga.arctic.ac

Installation of RAM and voltage regulator heatsinks

1

Heatsinks align to the bottomHeatsinks align to the bottom

Heatsinks align to the rightHeatsinks align to the right

Heatsinks align to the leftHeatsinks align to the left

2

Apply pressure

Apply pressure

(10 sec)

(10 sec)

Cure time

60mins

Caution: Please make sure the heatsinks are not touching any circuit components as it
may cause a short circuit to your VGA card.

Installation of mounting plate

1. Uninstall default mounting plate

Installation of main cooler

Please follow the installation instructions provided with the main cooler.

ARCTIC Switzerland

Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac

Copyright
2010 ARCTIC Switzerland. All Rights Reserved.

No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ARCTIC
Switzerland. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.

2. Install replacement mounting plate
comes with the accessories set