Arctic Cooling VR001 Installation

Accessories Set VR001

Installation Manual

For further information, please consult www.arctic.ac

Compatibility

ATI Radeon HD 5870, 5850, 5830, 4890, 4870, 4850, 4830, 3870, 3850
nVIDIA GeForce GTS 250, 9800GTX+, 9800GTX

Accessories

Heatsinks x 4

Heatsinks x 8

Tips for applying thermal adhesive

RAM Voltage regulator

Heatsinks x 4 Heatsinks x 4

Heatsinks x 4

*Thermal adhesive (3g) x 1

Apply pressure
(10 sec)

* Be aware that the thermal adhesive comes with a very
short shelf life and shall be used within 1 week. We
recommend storing the thermal adhesive in a cool area to
avoid solidification. Refrigerate after opening. Additional
heatsinks and thermal adhesive are available
for purchase at vga.arctic.ac

Caution: Please make sure the heatsinks are not touching any circuit components as it
may cause a short circuit to your VGA card.

Installation of RAM and voltage regulator heatsinks

1 2

How to squeeze out all the glue?

Cure time

60mins

Heatsinks align to the bottom

Heatsinks align to the left

Installation of main cooler

Please follow the installation instructions provided with the main cooler.

ARCTIC Switzerland

Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac

Copyright
2010 ARCTIC Switzerland. All Rights Reserved.

No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ARCTIC
Switzerland. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.