
ARCTIC ARMOR SAFETY COVERS
Email: __________________________________________
MEASURING AND ORDERING FORM
Date Company Name
COVER TYPE
12-Yr. Standard Mesh
15-Yr. Super Mesh
15-Yr. Ultra Solid
25-Yr. Commercial Mesh
SOLD TO:
Name
Address
City State Zip
Phone # Fax #
Order
Estimate
COVER COLOR
Green Blue
Green Blue
Green Blue
Black
Green
SPACING
5’ x 5’
3’ x 3’
PLEASE MARK YOUR POOL TYPE BELOW AND FILL IN ALL MEASUREMENTS
PROVIDE DRAWING TO SHOW STEP LOCATION AND DIMENSIONS AND ANY CUTOUT INFORMATION
ANCHOR TYPE
Concrete
Wood Deck
Lawn/Brick
FILL IN POOL DIMENSIONS BELOW
C. ______________ G. ______________
D. ______________ H. ______________
E. ______________ I. ______________
F. ______________ J. ______________
COPING
Is it abrasive? Y N
Type: ______________
Indicate Left or Right “bend” from shallow
to deep end - Lazy L Left shown
THE ABOVE POOL TYPES ARE MADE WITH 5’X5’ SPACING UNLESS OTHERWISE SPECIFIED
All gunite & free form pools must be AB measured due to their lack of symmetry. See the following AB measuring form.

ADDITIONAL REQUIRED INFORMATION
Please submit labelled photos for pools with complex features!
Cutouts may be required if objects are within 18” of pool.
Please provide A-B dimensions to locate object.
All non-removable obstacles.
1. Grabrails: Pt#__________to Pt#__________
Distance rails are set back from pool _____________
2. Handrails: Pt#__________to Pt#__________
Distance rails extend into pool
3. Ladders: Pt#___________to Pt#_________
Ladder Cups
(if cutout needed) Pt#___________to Pt#_________
How far does ladder extend into pool? _____________
4. Fillspout: Pt#___________
Dimensions & distance from pool: ________________
How high if raised? ____________________________
5. Dive Stand: Pt#___________to Pt#_________
12. Raised wall or Raised Bond Beam:
Pt#___________to Pt#_________
Give A-B dimensions at beginning of wall, as well as
along wall to end of wall. Height?__________
13. Waterfall or Rock Formation:
Pt#___________to Pt#_________
Furnish points at beginning, middle, end of formation.
Always use approximate 1’ intervals between points.
14. Varying Deck Levels:
step 1: Pt#___________to Pt#_________
A-B dimensions require indicating angle of the deck
from pool wall, out onto deck. Height?___________
step 2: Pt#___________to Pt#_________
step 3: Pt#___________to Pt#_________
15 Wood Deck: Yes __________ No ____________
Are wood deck anchor
anges required Yes __________ No __________
Indicate partial wood deck areas:
Pt#___________to Pt#_________
6. Slide Legs:
(within 2 ft) Pt#___________to Pt#_________
Distance legs are back from pool _________________
7. Dive Rocks: Pt#___________to Pt#_________
Distance back from pool ________________________
Give several points along rock, (left side, front side,
right side)
8. Grab Rocks: Pt#___________to Pt#_________
Distance back from pool ________________________
9. Type and width of coping: __________ and __________
10. Planter or grass area: Pt#_________to Pt#________
11. Spa: Pt#________to Pt#_________
Separate cover required Yes ________ No ________
How high is spa? _____________________________
Is spa wall ush with top of coping? Yes ____ No ____
Open Spillway: Yes ________ No ________
If yes: To locate spillway Pt#_______to Pt#_______
Give points all around spa and points at all four
corners of open spillway.
16. Commercial Pool:
Skimmer ___________________________________
Gutter _____________________________________
If gutter pool, ________________________________
indicate dimension of gutter ____________________
*Covers over 2000 sq. ft. must be made in 3x3 sections.
Additional Requirements
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_____________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
__

POOL TYPE VINYL GUNITE OTHER
package pool brand
Overall length________________, from point _________________ to point _____________ (longest point).
Overall width ________________, from point _________________ to point _____________ (widest point).
Additional cross dimensions: Pt# ____________ to Pt# __________, Pt# __________ to Pt# =__________,
Pt# ____________ to Pt#=____________ .
* The distance between A and B is ________________________________________________________
Show A B in relation to the pool (on sketch)
* Indicate areas where the deck is less than 4’ from waterline of the pool ________________________
No. A B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
No. A B
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
No. A B
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
No. A B
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
No. A B
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
PLEASE ANSWER ALL QUESTIONS ON BACK OF PAGE
A • • B
A-B line or extensions of, cannot intersect pool;
“A” must be left of “B”; number all points in clockwise direction

A-B MEASURING INSTRUCTIONS
Necessary for all free-form pools and ovals w/ step other than center end.
1. a. Draw a sketch of the pool shape on the grid provided.
b. To represent your A-B line, mark 2 points on the deck in a straight line approximately 3’-4’ from the pools
edge and about two-third’s (2/3) the length of the pool. “A” must always be to the left of “B” as you face the pool.
c. Make sure the pool is totally in front of the A-B line. This is a must because your measurements will be
incorrect if this instruction is not observed.
d. Measure the A-B line, and on your sketch, note its length and position in reference to the pool.
2. a. Use chalk to mark and number points clockwise around the entire pool at approximately 3 foot
intervals. Point #1 must be directly across from the center point of your A-B line. Make sure your marks
are on the inside edge of the pool. Make each step corner a numbered point. Measure sharp curves and
angles at 1’ to 2’ intervals or less. Any obstructions such as ladders, slides, rocks, waterfalls, etc. should be
a numbered point. Measure these last after complete all pool points.
b. Obstructions away from the water’s edge but within the 18” overlap area should be numbered last on the A-B
form, not in succession as you measure around the pool’s edge.
c. Make sure to include steps, ladders, waterfalls or any other non-removable obstruction on your sketch.
3. Record measurements from point A and B to all the points you have marked around pool perimeter.
a. Secure the end of your 100 ft. measuring tape to “A” on your A-B line and measure the distance to point #1
and note the distance in the “A” column on the chart provided. Continue around the pool until you have
recorded all your points with an “A” measurement.
b. Secure the end of your 100 ft. measuring tape to “B” and repeat the step above from “B” on your A-B line.
4. a. Take 3-4 diagonal measurements randomly from numbered points on the pool and note in the spaces
provided.
Items such as slide legs, ladders (that are not removable), etc. that are with 2’ of pool will be cutouts.
Measure these items after all pool points are nished.
Be sure to take 3 - 4 diagonal measurements!