Arctic P12 Silent User Manual

P12 Silent

Pressure-optimised Extra Quiet 120 mm Fan

• Optimised for static pressure

• Ideal choice on heatsinks, radiators and (partly-) covered case vents

• Push- or pull-configuration possible

• Virtually silent motor, developed in Germany

Designed by ARCTIC

P12 Silent

Pressure-optimised Extra Quiet 120 mm Fan

The P12 Silent fan features completely redesigned fan
blades and is optimised for high static pressure.

Thus, the P12 Silent is especially effective when used on
heatsinks and with higher air resistance.

The motor of the fan was developed in Germany and is
virtually silent.

Specifications

Fan
Airflo w

Noise Leve l
Voltage /Cu rrent

Dimens ions

120 mm, 1 050 RPM

24.1 CFM /40 .95 m³/h (@ 1050 RP M)

0.5 mm H2O (@ 1050 RPM)Static P ressure
Fluid Dy namic Bearin gBearin g

0.08 Son e(@ 1050 RPM)

0.09 A /12 V DC
3-pin Co nnectorConnec tor
120 (L) x 12 0 (W) x 25 (H) mm
139 gWeight

Optimised for Static Pressure

During the development of the new P12 Silent, special
emphasis was placed on a focused airstream and thus a high
static pressure.
The fan guarantees extremely efficient cooling, even with
increased air resistance.
Therefore, the P12 Silent is particularly suitable for use on
heatsinks and radiators.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is
achieved.
As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Virtually silent motor

At low fan speed, the motor is the main source of unwanted
noise. A motor developed in Germany with an enhanced
bearing reduces friction and noise.

Impeller

Teflon Plate

Steel Shaft

Precision Bearing

Lubricant Capsule
Lubricant

Designed by ARCTIC

180917_r1_EN