Arctic P12 User Manual

P12

Pressure-optimised 120 mm Fan

• Optimised for static pressure

• Ideal choice on heatsinks, radiators and (partly-) covered case vents

• Push- or pull-configuration possible

Designed by ARCTIC

P12

Pressure-optimised 120 mm Fan

The P12 fan features completely redesigned fan blades and is
optimised for high static pressure.
Thus, the P12 is especially effective when used on heatsinks
and with higher air resistance.

Specifications

Fan
Airflo w

Noise Leve l
Voltage /Cur rent

Dimens ions

Optimised for Static Pressure

During the development of the new P12, special emphasis was placed on a
focused airstream and thus a high static pressure. The fan guarantees extremely
efficient cooling, even with increased air resistance.
Therefore, the P12 is particularly suitable for use on heatsinks and radiators.

120 mm, 1 800 RPM

56.3 CFM /95.65 m /h (@ 1 800 RPM )

2.2 mm H2O (@ 1 8 00 RPM)Static P ressure
Fluid Dy namic Bearin gBearin g

0.3 Sone (@ 1 8 00 RPM)

0.20 A /12 V DC
3-pin Co nnectorConnec tor
120 (L) x 12 0 (W) x 25 (H) mm
139 gWeight

³

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within
the bearing is reduced and greater efficiency is achieved.
As a result, there is less heat development as well as less bearing noise, which
means you can enjoy a longer service life from your fan.

Impeller

Teflon Plate

Steel Shaft

Precision Bearing

Lubricant Capsule
Lubricant

Designed by ARCTIC

180917_r2_EN