Page 1
Freezer i32 / Freezer i32 CO
Welcome Guide
ES
suppor t.a rct ic. ac/ fi32
suppor t.a rct ic. ac/ fi32co
ES
Dear Customer,
Thank you for choosing the ARCTIC Freezer i32.
YOU are the centre of ARCTIC. We work hard to approach all angles
from a user's perspective and are fully dedicated to create innovative,
user-friendly and affordable devices. YOUR satisfaction is our ultimate
goal. In order to assist you even better, we launched a support platform
for Smartphones (support.arctic.ac).
In order to assist you even better, we launched a support platform for
Smartphones (support.arctic.ac).
I hope you enjoy the Freezer i32 and we at ARCTIC look forward to keep
your environment cool and quiet also in the future. If you would like to
sh ar e ho w yo u us e ARCTIC's pr od uc ts p lease d o so a t
https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your support helps us to
compensate every kilogram of CO we produce. Thank You.
2
Sincerely,
Magnus Huber
ARCTIC CEO
Accessories
D
Fan Set x 1
Screw
(M3 x 6mm)
x 4
Screw
(M4 x 13mm)
x 4
Screw
(M3 x 20mm)
x 4
G
Intel Mounting Clip
x 2
E
Spacer (black) x 1
H
Backplate
(for Intel Socket 1150,
1155,1156)
F
MX-4 (0.8g) x 1
I
Metal Wire Mounting
(two for spares) x 2
Page 2
Preparation
1
2
3
Carefully remove the
Carefully remove the
thermal paste residue
thermal paste residue
using paper tissue
using paper tissue
E
Spacer (black)
CPU Fan
socket on
motherboard
4
Page 3
5
G
Intel Mounting Clip
6
F
MX-4 (0.8g)
Cooler Orientation
A B
B
Screw
(M3 x 6mm)
Case FanCase Fan
C D
Case FanCase Fan
Case FanCase Fan
Case FanCase Fan
Page 4
Installation for Intel Socket 2011(-3)
1
Socket 2011(-3)Socket 2011(-3)
A B C D
25% Increments
C
Screw
(M4 x 13mm)
2
3
CPU Fan
socket on
motherboard
Page 5
Installation for Intel Socket 1150, 1155, 1156
1
Flip
2
H
Backplate (for Intel
Socket 1150, 1155,1156)
3
Socket 1150,
Socket 1150,
1155, 1156
1155, 1156
A B C D
25% Increments
D
Screw
(M3 x 20mm)
Page 6
4
5
CPU Fan
socket on
motherboard
Page 7
Thermal Compound
If the cooler has to be installed a second time, we highly recommend using
the MX-4 thermal compound from ARCTIC. Only this compound guarantees
optimal performance in combination with the surface of our heatsinks.
MX-4 is available at http://www.arctic.ac/mx4
Warranty
This ARCTIC product includes a two-year limited warranty. For further
information, please visit http://warranty.arctic.ac
Like us on facebook
www.facebook.com/ARCTIC.en
EC Declaration of Conformity
ARCTIC declares under its sole responsibility that this product is
compliant with the provisions of the electromagnetic compatibility
directive (2004/108/EC) and the Restriction of the use of certain
hazardous substances directive (2011/65/EU). A detailed Declaration of
Co nfo rmity is a vaila ble a t h ttp:/ /fi32 .arct ic.ac #su pport and
http://fico32.arctic.ac#support
Directive 2002/96/EC about Waste of Electrical and Electronic
Equipment (WEEE)
Waste of Electrical and Electronic Equipment must not be disposed of
with domestic waste.
If the device cannot be used anymore, the user is legally obliged to
separate it from domestic waste and hand it over to a designated
collection point of his community/district.
Thereby it is guaranteed that the Waste of Electrical and Electronic
Equipment is recycled properly and negative impacts for the
environment are avoided.
Therefore, electronic devices are marked by this sign.
© 2015 ARCTIC (HK) Ltd. All rights reserved.
No part of this manual including the products described in it, may be
reproduced, transmitted, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the
purchaser for backup purpose, without the express written permission of
ARCTIC (HK) Ltd. In no event shall ARCTIC, its directors or employees be
liable for any indirect damages, incidental or consequential damages arising
from any defect or error in this manual or product.
Loading...