Page 1
Freezer 33 eSports ONE
Tower CPU Cooler with BioniX Fan
• Includes BioniX Fan with best airflow to noise ratio
• New, quiet ARCTIC motor
• 200 –1 800 RPM (PWM control)
• PWM Sharing Technology (PST) regulates fan speed synchronously
• Longer service life through low coil temperature
• Compatible with Intel & AMD sockets
• Special thermal coating and offset heat pipes ensure optimal heat-dissipation and
increased cooling performance
• Anti-vibration rubbers for quiet operation
• Transport-proof mounting with backplate
• MX-4 thermal paste included
® ®
Designed by ARCTIC
www.arctic.ac
Page 2
Freezer 33 eSports ONE
Tower CPU Cooler with BioniX Fan
The Freezer 33 eSports ONE is a powerful Tower CPU cooler
equipped with our new BioniX Fan.
The cooler uses our newly developed thermal coating, which
creates micro-turbulences to improve air-circulation and
increase cooling performance.
With a high range of 200 -1 800 RPM, the BioniX F120 fan is
controllable with PWM to regulate the fan speeds as needed.
The new ARCTIC motor with low coil temperature quadruples
the life span and we extend the warranty to 10 years.
Specifications
Heat Pipe
Heatsink Material
Thermal Compound
Fan
Bearing
Noise Level
Current / Voltage
Max. Cooling Capacity
Recommended for TDP up to
Dimensions
Stocket Compatibility
Direct Touch Ø 6 mm x 4
Aluminium Fins x 49, Thickness: 0.5 mm
MX-4
120 mm, 200 – 1 800 RPM (Controlled by PWM)
Fluid Dynamic Bearing
0.5 Sone
0.20 A /12 V DC
320 Watts
200 Watts
123 (L) x 88 (W) x 150 (H) mm
676 gNet Weight
®
Intel
AMD
®
2066 , 2011(-3) , 115X * *
AM 4
*Square ILM
Low Motor Temperature 4 x Life Span–
10 °C lower motor temperature doubles the life span. The BioniX gaming fans
have a four times longer service life through low coil temperature.
Therefore, we extend the warranty to 10 years.
BioniX F120
(3-phase motor)
Typical 120 mm fan
(1- or 2-phase motor)
35 3 °C.
54 5 °C.
Designed by ARCTIC
Page 3
Freezer 33 eSports ONE
Tower CPU Cooler with BioniX Fan
Fluid Dynamic Bearing Maximum Quietness, Minimum Vibration
Due to a new alloy/lub ricant combi nation develo ped in
Germany, the fricti on within the be aring is reduced and a
greate r efficiency i s achieved. Thi s way, the re is less heat
development as w ell as less bear ing noise and you c an enjoy
a longer s ervice life of y our cooler.
Lubricant capsule
Lubricant
Extremely qui et operation thr ough a newly deve loped
motor gu arantees long s essions with out annoying no ise.
ARCTIC' s new motor of the B ioniX Fans eli minates
vibrati ons directly a t its source, in p articular at t he motor.
The ARCTI C motor absorb s 95 % of vibration s compared
to a conven tional DC moto r. Thus, there is n o need for
rubber spacer s due to the stead y torque and smo other
switching of th e magnet field.
Impeller
Teflon Plate
Steel Shaft
Precision Bearing
Multiple Compatibility
Fast and e asy to install a nd extremely reliable , the differen t
mounting syst ems are compatible wit h Intel and AMD so ckets.
Thanks to a backp late and a significant ly lower weigh t
compared to the i 30, the Freezer 33 e Sports ONE is no t only
fool-proof to i nstall, but also absol utely transpor t safe.
AMD
®
Intel
®
Fan with newly developed
ARCTIC motor
Fan with regular motor and
anti-vibration-rubbers
Fan with regular motor
without vibration absorption
50 % Vibration Absorption
No Vibration Absorption
95 % Vibration Absorption
Vibration Absorption
Optimised Fan Design
We furth er optimised t he fan blade des ign to get a higher
airflo w at lower noise g eneration.
With the ra nge of 200 to 1 800 RP M the fans of the Free zer
33 eSports ONE ar e controllab le with the Patent ed PWM
Sharin g Technolo gy to regulate t he fan speed as ne eded.
Special Thermal Coating
A newly develope d thermal coat ing creates micro-tu rbulences wi th a special rough surfa ce structure . Combined with offset
heat pip es this leads to a n optimised he at-dissipa tion and to an inc reased cooli ng performan ce.
Without coating
Designed by ARCTIC
With coating
171012_r3_EN
Loading...