
www.arctic.ac
Alpine 64 PRO Rev.2
Intallation Manual
EN
PL
FR
DE ...
support.arctic.ac.a64pror2
Dear customer,
Thank you for choosing the Alpine 64 PRO Rev.2.
This is a budget CPU cooler which offers standard
users enough performance and keeps the noise
level at minimum due to the large surface area of
the heatsink and an efficient fan. The mounting
system makes the installation a quick and easy
process and offers absolute transportation safety.
I hope you enjoy this CPU cooler and we at
ARCTIC look forward to further enriching your life
with our products. If you would like to share how
you use ARCTIC's products please do so at
https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your
support helps us to compensate every kilogram of
CO we produce. Thank You.
2
Sincerely,
Magnus Huber
ARCTIC CEO

Preparation - Uninstall AMD stock cooler
Remove the stock cooler and the plug carefully. If the
1
stock cooler is sticking to the CPU, rotate it slightly.
Clean the CPU carefully. Remove the residue paste by
Clean the CPU carefully. Remove the residue paste by
2
paper tissue carefully.
paper tissue carefully.
Installation of Alpine 64 PRO Rev.2
Caution: Do not touch the pre-applied thermal paste.
1

Make sure the screws are sitting perfectly in the hole.
2
3

4
Specifications
90 WattsMax. Cooling Capacity
Fan
Thermal Compound
The thermal compound is already pre-applied to the heatsink. If the cooler is
installed for a second time, we highly recommend using MX-4 from ARCTIC.
Only our compounds guarantee optimal performance in combination with the
surface of our heatsinks.
Warranty
This ARCTIC product includes a six-year limited warranty. For further
information, please consult warranty.arctic.ac
© 2014 ARCTIC Switzerland AG. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced, transmitted,
stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purpose, without the express written
permission of ARCTIC Switzerland AG. In no event shall ARCTIC its directors or employees be
liable for any indirect damages, incidental or consequential damages arising from any defect or
error in this manual or product.
92mm, 500 - 2,000 RPM
(Controlled by PWM)
Fluid Dynamic BearingBearing
0.4 SoneNoise Level
0.16A / +12V DCCurrent / Voltage
105 (L) x 113 (W) x 84 (H) mmDimensions
428gNet Weight
Like us on facebook
www.facebook.com/ARCTIC.en