ARCOLECTRIC 8600 User Manual
tel: +44 (0)20 8979 3232 • Arcolectric • email: info@arcoswitch.co.uk
TERMINAL FUNCTION ROCKER BODY PRINT, COLOUR, VOLTAGE ETC
H 8653
V B
---
14
rocker
switches
V Curved
V Curved (lit)
D Paddle lever
(Single pole non-lit only)
H Slotted for actuator
(8600 and 8610 only)
F Flat
Indicator only (Single pole)
8600 Rocker Switches - Miniature 10A 250Vac Single & Double Pole
ROCKERFUNCTION
Approvals &
ratings vary
with function
ON OFF Switches
are ON when pressed
over terminal 3
ON - OFF
8600
10(4)A
16A 250V, 10A 277V
1
/2HP 277V,1/4HP 125V
8650
10(4)A
10A 277V
1
/2HP 277V,1/4HP 125V
ON - OFF
(momentary ON)
8601
6(1)A
16A 250V, 6A 277V
8651
6(1)A
6A 277V
ON - OFF
(momentary OFF)
8602
10A
16A 250V, 10A 277V
8652
10(4)A
6A 277V
ON - OFF
Lit
N/A 8653
10(4)A
6A 277V
ON - ON
8610
6(1)A
10A 277V
1
/2HP 277V,1/4HP 125V
8660
6(1)A
10A 277V, 1/2HP 277V
1
/2HP 277V,1/4HP 125V
ON - ON
(momentary 1 side)
8611
6A 277V
8661
6A 277V
ON - OFF - ON
8620 µ
See page 16
8670 µ
See page 16
Indicator
8630
TERMINAL
H
4.8 x 0.8
T
3.5 x 0.8
Solder
X
PCB
0.8 Sq
Double Pole switches with “X”
terminals are supplied without
terminal barriers
7.4
10(4)A 250Vac T90 (unless noted below)
UL CSA See ratings below
UL 65˚C, file E45221, CSA file LR10990
Inrush 50A to EN61058-1 & 10A 24Vdc
RoHS compliant
3mm contact gap except where marked µ.
Technical data on pages 4 & 5 (switches), 6 (indicators).
6.4
O/ 2.2
5.3
3.7
213
213
5
4
6
In house test
Miniature rocker switch
Ratings up to 16A,
250Vac
Single & double pole
ON/OFF, C/O, biased and
centre off switching
Push on, solder and PCB
terminals
Illuminated and non-
illuminated
Matching indicators
Panel cut out
single: 19.3 x 12.9
double: 19.3 x 21.9
RoHS
tel: +44 (0)20 8979 3232 • Arcolectric • email: info@arcoswitch.co.uk
Examples of printing
CL142 CL059 CL058
CL076 CL080 CL141
H8600VB ---
T8600VB ---
H8600VB ---
T8600VB ---
H8660VB ---
T8660VB ---
T8653VB ---
H8630FB ---
T8630FB ---
H8653VB ---H8650VB ---
T8650VB ---
Finish
Matt finish only.
Colour
Call sales for custom colours.
A full range is available for large orders.
Legend printing
Select from the examples or call sales for
custom legend.
Lamp voltage
Call sales for details of available voltages.
Blanking plate A8634FB
Dummy unit to fill unused panel holes.
Single pole size only.
Protective covers
L167 for SP
L180 for DP
(designed to IP65)
Snap on to bodies with V rocker or F lens, this
reduces maximum acceptable panel thickness
to 2.2mm.
Single Pole options
Most switches shown can have single pole
switching in double pole bodies.
15
rocker
switches
BODY
B Single pole
Panel cut-out Bezel
Single Pole dimensions for snap-in fixing
Panel thickness Dimension X
0.75-1.24 19.1/19.2
1.25-1.99 19.3/19.4
2.00-3.00 19.7/19.8
B (Double Pole) with terminal barrier
BC (Double Pole) w/o terminal barrier
Panel cut-out Bezel
Double Pole dimensions for snap-in fixing
Panel thickness Dimension X
0.75-1.24 19.1/19.2
1.25-1.99 19.3/19.4
2.00-3.00 19.7/19.8
DIMENSIONS (mm)
Single pole Double pole
5.8
12.5
2.0
7.4
7.0
7.0
OPTIONS
Terminals shown
are “H” 4.8 push on type
For 8620 and 8670 dimensions see page 16
5.8
19.8
to barrier
2.0
12.5
7.0
7.0
Terminal spacing
10.2 between pole centres
Cut-outs must be punched in the direction of insertion
X
12.9
15.0
X
21.0
21.0
21.9
24.0
Loading...