z Do not subject the device to severe impact or drop it from heights.
z Do not use the device in extreme hot or cold, dusty or damp conditions. Do not
expose it to direct sunlight.
z Avoid using the device near strong magnetic fields.
z Normal functioning of the product may be disturbed by ESD. If so, simply reset
and restart the device following the instruction manual. During file transmission,
please handle with care and operate in a static-free environment.
zKeep the device away from water and other liquids. In the event that water or
other liquids enter the device, power off the product immediately and clean the
device.
zDo not use chemicals to clean the device in order to avoid corrosion. Clean it
with a dry cloth.
zDo not install this equipment in a confined space such as a book case or similar
unit. The ventilation should not be impeded by covering the ventilation openings
with items such as newspaper, table-cloths, curtains etc.
zNo naked flame sources, such as lighted candles, should be placed on the
apparatus.
z Attention should be drawn to environmental aspects of battery disposal.
z Use the apparatus in moderate climates.
z We are not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
zDo not attempt to disassemble, repair or modify the product. This will invalidate
the warranty.
zIf the device will not be used for an extended period of time, please charge the
battery at least once per month to maintain battery life.
zCharge the battery if:
a) The battery level icon displays (An empty battery)
b) The device powers off automatically when restarted.
c) There is no response when pressing keys with keys unlocked and battery full.
zDo not interrupt the connection when the device is being formatted or
transferring files. Otherwise, data may be corrupted or lost.
zWhen the device is used as a portable HD, please use only per the instructions.
Otherwise, permanent data loss could occur.
zPlease use and install data using the attachments/accessories provided and only
according to the manufacturer’s instruction.
zPlease refer to the information on the bottom of the device for electrical and
safety information before installing data or operating the device.
zTo reduce the risk of fire or electric shock, do not expose this device to rain or
moisture. The device should not be exposed to dripping or splashing. Never
place objects filled with liquids, such as vases, on the device.
zThere is danger of explosion if the battery is replaced incorrectly. Replace only
with the same or equivalent type.
1
The battery (battery or batteries or battery pack) should not be exposed to
z
excessive heat such as sunlight, fire or the like.
z Please follow responsible procedures for battery disposal.
z If the power adaptor disconnected from the device, the device will remain
operable as long as the battery has sufficient charge.
zThe power adaptor is a CLASS II apparatus with double insulation, and no
external ground is provided.
zSafety symbol explanation:
- The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
- To reduce the risk of electric shock, do not remove the cover (or back) as
there are no user-serviceable parts inside. Refer servicing to qualified
personnel.
- The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in
the literature accompanying the device.
- Correct Disposal of this product. This marking indicates that this
product should not be disposed of with other household waste in the EU. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To dispose of your used device,
please use the return and collection systems available in your area or
contact the retailer where the product was purchased. They can take this
product for safe environmental recycling.
2
Listening Cautions
zThis product respects the current regulations for limiting the output volume of
consumer audio devices to a safe level. By listening to your device with
headphones or earbuds at high volumes, you run the risk of permanent damage
to your ears. Even if you get used to listening at high volumes and it seems
normal to you, you still risk the possibility of damaging your hearing. Reduce the
volume of your device to a reasonable level to avoid permanent hearing damage.
If you hear ringing in your ears, reduce the volume or shut off your device. This
device has been tested with the supplied earphones. In order to preserve your
hearing, it is advised that you use only the following headphone models: the
earphones supplied with your device, or any other headphones that respect the
current regulations. Other types of headphones may produce higher volume
levels.(At full power ,the prolonged listening of the walkman can damage the ear
of the use)
zDo not use while operating a motorized vehicle. It may create a traffic hazard
and is illegal in many areas.
zYou should use extreme caution or temporarily discontinue use in potentially
hazardous situations created by obstructed hearing.
zEven if your headphones or earphones are the open-air type designed to let you
hear outside sounds, don’t turn up the volume so high that you can’t hear what’s
around you.
zSound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. What sounds “normal” can actually be loud and harmful to
your hearing. Guard against this by setting the volume of your device at a safe
level BEFORE your hearing adapts.
To establish a safe volume level:
a. Start your volume control at a low setting.
b. Slowly increase the sound until you can hear it comfortably and clearly,
and without distortion. Once you have established a comfortable sound
level, leave it there.
This manual may not reflect your actual device’s operation. All infor mation is subject to change
without prior notification. Please follow your actual device’s operational procedures.
C. HDMI interface
D. TF Card Slot
E. Built-in microphone
F. Power –Briefly press to lock or
unlock the screen; press and hold
to turn on or off the unit or reset it.
G. Charge indicator
H. Front webcam
I. Display
J. VOL+ button – Increase
the volume.
K. VOL- button – Decrease
the volume.
L. Rear webcam
M. Built-in speakers
5
Basic Connections
Charging the Battery
The device has a built-in rechargeable battery. Charge the device when the battery
level is low.
To charge the battery, connect the device to a power adaptor via the USB port. It
takes a few hours to fully charge the battery.
The charge indicator lights in red during charging and in orange when charge is full.
Note:
a. You are prompted to charge the battery when the device warns that the battery is lower than 15%!
b. In the event that the device shuts down automatically because of battery exhaustion, charge the battery
for at least 5 minutes before you can turn on the device.
c. Since charging by USB connection with computer is extremely slow, you are NOT suggested to charge
the battery with computer.
Turning On/ Off the Tablet
To turn on the device, press and hold the Power button on the unit until you see the
boot-up screen. It may take about one minutes to start up the system.
To turn off the device, press and hold the Power button until you see the option
“Power Off”, tap on “Power Off” and then tap on “OK”.
Tip: The device may fall asleep with the screen display locked when there is no touch action for a while.
You can briefly press the Power button to wake it up.
Installing the Memory Card (TF card)
This device can read files directly from a memory card (TF card/Micro SD card).
Also, you can install a card into the slot on the top edge of the device for the purpose
of reading data from the memory card.
To install a memory card, find the card slot on the top edge of device and then insert
the card into the slot in the correct orientation.
To access the files stored in the memory card, enter the file explorer mode and select
the “External SD” directory.
TF Card
Connecting to PC for transferring files
Before reading or playing files, you need to transfer media files from a computer to the
device.
(1) Connect the device to a computer with the supplied USB cable.
(2) Tap “Turn on USB storage” to connect the device to computer.
(3) Once connected, two removable disk drives will show on your computer. One
6
represents the internal memory of the device, and the other represents the
memory card inserted into the device. Now you can copy files from or to these disk
drives just as you would on your hard drive.
(4) As you complete file transfer, choose “Turn off USB storage” to disconnect the
device.
(5) Remove the device from the computer safely.
Note:
a. As you connect the tablet to the PC, you need to install the Windows Media Player (the latest version)
and the USB drive first.
b. There is no audio prompt for USB connection.
c. If the device is power-off or in sleep while you connect it to PC, there will be no response of connection
appearing on your PC. You have to turn it on or wake it up to continue.
Basic Operation
Home Screen
a
c
a. Battery level
b. Time
c. Google Search bar
d. Application tab
e. Return button
f. Home button- Go to Home screen
g. Recent opened apps
d
e
g
f
The Extended Home Screen
The Home Screen consists five separate screens for
positioning the shortcuts, widgets etc.. Slide your finger
left or right on the screen to go to the extended screens.
7
Unlock the Screen
The screen will be locked after the device is idle for a few
seconds. You need to unlock the screen by dragging the lock
rightwards.
icon
Customizing Home Screen Items
y To add a Home Screen item (shortcut, widget etc.), you can
tap the application icon
widgets, then hold your tap on an item to place it on the
home page.
Note: If current page of Home Screen has no enough room for a
shortcut or widget, you will be prompted that there is no more
room.
to display all applications and
y To move a Home Screen item, hold your finger onto it to
highlight it, then drag it to the desired location, and release it.
y To remove a Home Screen item, hold your finger onto it to
highlight it, drag it to the recycle bin symbol “X” and then
release your finger.
y To change the wallpaper, hold your tap on the Home screen
until a menu appear. Tap on “Wallpaper” and then choose a
picture as the desktop wallpaper.
Hold down
General Touch Actions
8
p
y Tap button to get back to previous screen page; tap button to go to
the Home screen; tap button to bring up the context menu options; and tap
the button to check the recent opened apps.
y When watching a video or listening to music, you can
tap on the progress bar to play any designated section
of the file. You can drag the cursor of the progress bar
to change the playback progress.
y In some apps, you can slide your finger on the screen
up and down to scroll the file list; and sometimes you
may hold your finger on an item to display options (if
available).
y When viewing a photo or webpage, you put your
fingers (at least two) on the screen, and you can pinch
your fingers to zoom out it, or open your fingers to zoo
out it for better visual effect.
Using the Virtual Keyboard
Whenever you need to input something, tap on any text input box to open the virtual
keyboard, with which you can enter a website address or any text required.
Caps Lock: quickly
tap twice to input all
letters in capital;
briefly tap once to
input the first letter
in ca
ital.
Backspace
Enter
Space
Accessing Internet
You can access to the Internet easily with Wi-Fi networks.
1) Make WI-FI Connection
a. Tap the Setting icon on the Home Screen to open the settings menu.
b. Select “WIFI” and slide the toggle switch to “ON” to turn on WIFI.
c. Tap “Wi-Fi” to select a router, the device will scan automatically for available WiFi
networks and display them in the right panel. The list of available networks shows
all the wireless networks in range of your device.
d. Choose a network from the list and then tap “Connect” to connect. Some network
may be secured with password, enter the password before connecting. If the
connection is successful, the message Connected to…(WiFi Network Name) will
appear under the WIFI Setting.
9
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.