tap on Scan.
If the WiFi network you want to connect to does not appear in the list, scroll down the screen, then tap on
Add a Wi-Fi network. Enter the required settings, then tap on Save. To access the advanced network
parameters (Regulatory domain, IP address, etc), tap on the Menu icon, then tap on Advanced. Other
parameters will appear: the required information can be obtained from the person who manages the
network.
3.2. WiFi connection problems
The ARCHOS internet tablets support the 802.11 b, g, and n WiFi protocols. If you cannot connect to
your access point, first determine if the problem lies with your access point or with the ARCHOS. Try
using another WiFi device, such as a laptop computer or a Wi-Fi enabled telephone and see if that will
connect to your access point. If it does, then use the same WiFi connection settings that it has on your
ARCHOS. You could also try connecting your ARCHOS to a friend's WiFi network and if this works,
change your access point parameters to similar ones.
3.2.1. POSSIBLE SOLUTIONS
1. Check your WiFi router/modem documentation to see if it has a pairing button that needs to be pressed.
Some modems have such a button that must be pressed the very first time you try to make a WiFi
connection with a new device.
2. If you have to enter a password (a security code of type WEP or WPA) be very careful that you do not
confuse a 1 and I (one and letter “I”), a 0 and O (zero and letter “O”), or U and V. These are common
mistakes.
3. When entering a security code for your WiFi access, check the box Show password which will allow
you to see exactly what you are typing in. This will avoid any mistakes.
4. Some access points use what is known as MAC filtering. That means, the WiFi access point has a list of
access numbers (every hardware device has a unique MAC number) which are the only ones allowed to
access to the WiFi point. The person managing the WiFi modem/router should shut off this MAC filtering
system to see if this solves the problem. It is recommended to shut off MAC filtering in general as this is
now known to be an outdated and ineffective system for WiFi security. If you must use it, you can find
your device's specific MAC address by going to Settings > Wireless & Networks > Wi-Fi settings >
Menu > Advanced. It will look something like 00:16:dc:5e:9e:39.
5. Try temporarily shutting off the encryption system of your WiFi router/modem to see if the problem
has to do with the encryption system you are using. The preferred encryption system is the WPA2.
4. TRANSFERRING FILES
When you want to transfer files to or from the ARCHOS (photos, documents, music, video, or
applications (.apk files)) you can transfer them via the USB cable or via a wireless network connection. It
is also possible to transfer files directly to/from a camera, USB stick, powered hard drive, or an MP3
player using the optional USB host cable. Use the application Files when transferring files by a wireless
network or when transferring files to/from a device that is connected directly to the ARCHOS with a USB
cable.
4.1. Connecting the ARCHOS to a computer
1. Connect the supplied USB cable to the ARCHOS.
2. Plug the USB end of the cable into your computer.
3. The ARCHOS will turn on and ask you if you want to connect it (Mount) or not. Choose to Mount it.
4. If you choose to just let it charge, you can always drag the top notification bar downwards to reveal the
USB notification message and choose to connect.