ARCH SA10-48-12S, SA10-48-15S, SA10-48-24S, SA10-48-3.3S, SA10-48-5S Datasheet

Encapsulated DC-DC Converter
SA10 SERIES 10 Watts
KEY FEATURES
Power Modules for PCB Mounting Regulated Output Low Ripple and Noise 2-Year Product Warranty
ELECTRICAL SPECIFICATIONS
Model No. SA10-48-3.3S SA10-48-5S SA10-48-12S SA10-48-15S SA10-48-24S Max output wattage (W)
Input Input filter
Output
Protection
Isolation
Environment
Physical
Voltage (V.DC.) 3.3 5 12 15 24 Voltage accuracy Current (mA) max 2500 2000 833 666 416 Line regulation (HL-LL) (typ.) Load regulation (10-100%) (typ.) Ripple <0.2% Vout +20mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 77% 79% 82% 82% 83% Switching frequency 125KHz 125KHz 125KHz 125KHz 125KHz Over current protection Works over 120% of rating and recovers automatically. Over voltage protection Zener diode clamp Short circuit protection Current limit, auto-recovery Voltage 1600 VDC. Resistance Capacitance 1000 pF Operating temperature -25°C…+71°C Storage temperature -55°C…+105°C Case temperature +95°C max. Temperature coefficient Humidity 95%RH MTBF >800,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 2.0 x 1.0 x 0.55 Inches (50.8 x 25.4x 14 mm) Case Material Six-side shielded Aluminum with Non-Conductive base Weight 25 g Cooling method Free-air convection
8.25W 10W 10W 10W 10W
π type
±2% ±2% ±2% ±2% ±2%
±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±1% ±1% ±1% ±1% ±1%
9
ohms
10
±0.02% Per°C
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319 -1-
Encapsulated DC-DC Converter
SA10 SERIES 10 Watts
MECHANICAL DIMENSION (Top View)
PIN# Single
1 -DC IN 2 +DC IN 3 -DC OUT 4 +DC OUT
DERATING
BLOCK DIAGRAM
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319 -2-
Loading...