Encapsulated DC-DC Converter
SA06 SERIES 6 Watts
KEY FEATURES
Power Modules for PCB Mounting
Regulated Output
Low Ripple and Noise
2-Year Product Warranty
ELECTRICAL SPECIFICATIONS
Model No. SA 06-24-3.3S SA 06-24-5S SA 06-24-12S SA 06-24-15S SA 06-24-24S
Max. output wattage (W) 5W 6W 6W 6W 6W
Input voltage (V.DC.) 24V (18-36V) 24V (18-36V) 24V (18-36V) 24V (18-36V) 24V (18-36V)
Output voltage (V.DC.) 3.3V / 1500mA 5V / 1200mA 12V / 500mA 15V / 400mA 24V / 250mA
Model No. SA 06-24-3.3S SA 06-24-5S SA 06-24-12S SA 06-24-15S SA 06-24-24S
Max output wattage (W)
Input Input filter
Output
Protection
Isolation
Environment
Physical
Voltage (V.DC.) 3.3 5 12 15 24
Voltage accuracy
Current (mA) max 1500 1200 500 400 250
Line regulation (HL-LL) (typ.)
Load regulation (10-100%) (typ.)
Ripple <0.2% Vout +20mV max (Vp-p)
Noise <0.5% Vout +50mV max (Vp-p)
Efficiency 76% 79% 82% 82% 83%
Switching frequency 125KHz 125KHz 125KHz 125KHz 125KHz
Over current protection Works over 120% of rating and recovers automatically.
Over voltage protection Zener diode clamp
Short circuit protection Current limit, auto-recovery
Voltage 1600 VDC.
Resistance
Capacitance 1000 pF
Operating temperature -25°C…+71°C
Storage temperature -55°C…+105°C
Case temperature +95°C max.
Temperature coefficient
Humidity 95%RH
MTBF >800,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H) 2.0 x 1.0 x 0.55 Inches (50.8 x 25.4x 14 mm)
Case Material Six-side shielded Aluminum with Non-Conductive base
Weight 25 g
Cooling method Free-air convection
5W 6W 6W 6W 6W
π type
±2% ±2% ±2% ±2% ±2%
±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
±1% ±1% ±1% ±1% ±1%
9
ohms
10
±0.02% Per°C
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319 -1-
Encapsulated DC-DC Converter
SA06 SERIES 6 Watts
MECHANICAL DIMENSION (Top View)
PIN# Single
1 -DC IN
2 +DC IN
3 -DC OUT
4 +DC OUT
DERATING
BLOCK DIAGRAM
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319 -2-